The amount of hydraulic oil required for the normal operation of the automatic waste paper baler is relatively large (3-6 barrels). The carton baler has a major impact on the work of the waste paper baler. .

In the production process of different equipment of waste paper baler, we must pay attention to the question of hydraulic oil cleanliness. Carton Baler waste paper Baler is a kind of multi-material squeezing and packaging function and integrated packaging equipment. The automatic waste paper Baler is used to squeeze waste paper and roughly the same products under normal conditions and use special packaging tapes. Packed into shape, its size is greatly reduced.

In this way, the cost of transportation and storage can be reduced, and the purpose of increasing benefits for companies and individuals. At the same time, this also facilitates the use of containers for transportation. It is precisely because of the multi-faceted, multi-applicability and commonality of the fully automatic waste paper balerthat the waste paper baler can be used in various industries and increased waste paper packaging. Importance in the in-flight industry.

The automatic waste paper baler can also be used to pack loose materials such as straw and cotton, molecular compound plastic bottles, straw, etc., because this is also called a straw baler, straw baler, and molecular compound plastic bottle baler. Wait! One machine is multi-purpose and economical.

NKBALER220 fully automatic baler: It is a general-purpose model with fast baling speed and low failure rate. High work efficiency, welcome to buy.

2022-03-29

The wood fiber squeezing baler is different from the squeezing baler for waste paper, waste iron, waste plastic, waste clothing and other materials. Different wood fiber production companies use different processing procedures, and the composition and water content of the materials are different, so the required pressurization method and required pressure are also exquisite.

There are two types of wood fiber balers, vertical and horizontal. The two types have different pressure directions, and the corresponding output and extrusion effects are different.

1. The vertical balers have small output and waste labor, suitable for squeezing wood fiber materials with high moisture content and are not easily deformed. Each vertical baler needs 2 people to operate.

2. The horizontal balers can produce moisture between 6 and 50, and the automatic operation, high output, saves labor. Automated operation is one device with 3 people, and two devices with 5 people. The output is 8-11 packages per hour, and each package weighs 1.3 tons (20 moisture).

This year, the 220-type hydraulic baler is the most popular choice for customers, which has large flow, high speed and high pressure, and is suitable for squeezing and Baler a variety of wood fiber materials.

NKABLER220 wood fiber baler is suitable for long-term uninterrupted work, simple operation and low failure rate. The output of a horizontal wood fiber baler is equal to the output of 4 vertical balers, but the labor cost is lower than that of a vertical baler!

2022-03-24

Gantry shears, hydraulic shears
NKBALER gantry shears are hydraulically driven. Compared with mechanical transmission shears, they have the characteristics of small size, light weight, low movement inertia, low noise, smooth movement, flexible operation and large cutting section.
Hydraulic and electric integrated control, single and continuous action conversion can be implemented, simple and convenient to use, can be stopped and run at any working position, and easy to realize overload protection.
It has a wide range of applications. It can be used as processing equipment for metal recycling and processing units, as well as furnace charge processing in factory foundries and metal cutting processing equipment in the mechanical construction industry.
The length of the working blade of the gantry shear: 800mm, 1000mm, 1200mm, 1400mm, 1500mm, 1800mm, the larger can reach 2200mm; the shear force is from 300 tons to 1200 tons, suitable for users with different scales and different requirements.
The equipment adopts an integrally welded solid open structure, which can maintain sufficient rigidity of the fuselage and at the same time have a more convenient operating space;
The press-fitting stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold;
It is suitable for blanking, bending, flanging, sheet drawing, fine blanking, and cold extrusion of metal parts;
Adjustable pressing force, no overload, realizing the pressure holding requirements of each working step in the pressing process;
The lifting height of the press-fit spindle can be adjusted within any range of travel by a timer or position sensor;
Low oil pump displacement, low motor power, power saving and energy saving;
Centralized button, with manual, semi-automatic and automatic three operations;
The hydraulic system meter is built in the frame, and the appearance is neat, light and stable;http://www.nkbaler.net
Optional: install photoelectric protection device, automatic lubrication device, oil temperature cooling constant temperature device.

2022-03-24

Gantry shears, hydraulic shears
NKBALER gantry shears are hydraulically driven. Compared with mechanical transmission shears, they have the characteristics of small size, light weight, low movement inertia, low noise, smooth movement, flexible operation and large cutting section.
Hydraulic and electric integrated control, single and continuous action conversion can be implemented, simple and convenient to use, can be stopped and run at any working position, and easy to realize overload protection.
It has a wide range of applications. It can be used as processing equipment for metal recycling and processing units, as well as furnace charge processing in factory foundries and metal cutting processing equipment in the mechanical construction industry.

The length of the working blade of the gantry shear: 800mm, 1000mm, 1200mm, 1400mm, 1500mm, 1800mm, the larger can reach 2200mm; the shear force is from 300 tons to 1200 tons, suitable for users with different scales and different requirements.

The equipment adopts an integrally welded solid open structure, which can maintain sufficient rigidity of the fuselage and at the same time have a more convenient operating space;
The press-fitting stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold;
It is suitable for blanking, bending, flanging, sheet drawing, fine blanking, and cold extrusion of metal parts;
Adjustable pressing force, no overload, realizing the pressure holding requirements of each working step in the pressing process;
The lifting height of the press-fit spindle can be adjusted within any range of travel by a timer or position sensor;
Low oil pump displacement, low motor power, power saving and energy saving;
Centralized button, with manual, semi-automatic and automatic three operations;
The hydraulic system meter is built in the frame, and the appearance is neat, light and stable;
Optional: install photoelectric protection device, automatic lubrication device, oil temperature cooling constant temperature device.
NKABLER is a professional shearing machine manufacturer, welcome to visit our company website www.nkbaler.com for consultation.

2022-03-10

Hydraulic baler, horizontal baler, plastic baler
The hydraulic baler uses the basic premise of the driving force of the four-column hydraulic press. According to the driving force caused by the hydraulic cylinder or the motor of the four-column hydraulic press, the electronic components of the mechanical equipment are transformed into a larger driving force to convert the goods into blocks.
The reduction of cargo capacity makes it beneficial to packaging, cost-saving transportation, and utilization rate, which is becoming more and more green and environmentally friendly. Because of it, it is now widely used in the entire industry chain such as waste printing paper purchase plants, plastic recycling plants, and agricultural and livestock industries.
1. For soft goods, the hydraulic Baler machine can reduce the size of fabrics, waste picture printing, clothing and other woven fabrics, so that its capacity is reduced. In a certain transportation interior space design scheme, it can put a lot of goods, thus Ensure to reduce the number of transportation, save transportation costs, and increase economic benefits for the enterprise.

2. The main purpose of the hydraulic baler can be used in a variety of ways, such as waste plastic plastic film, waste plastic agricultural film, plastic greenhouse film, plastic bottles, waste picture printing, waste old cardboard boxes, clothes and pants, etc. It is possible to reduce the goods occupying the ground and process the stamped parts into a small piece,

3. The hydraulic baler is a special industrial equipment for packaging packaging bags, waste picture printing, packaging bags, packaging bags, pure cotton yarn, fabrics, etc. Not only can it be used in industrially developed woven bag factories and waste printing paper purchase factories, but it is also more applicable to the general large and small hand-knitting industries. This machine has the advantages of reasonable layout, simple operation steps and cost saving, and has the advantages of high pressure, compact package, time saving and time saving.
NKBALER is a manufacturer specializing in the production of hydraulic balers, with simple structure, convenient operation and a wide range of applications. For more details, please consult our sales staff 86-29-86031588

2022-03-10