The waste paper baler is a kind of hydraulic machinery, but as long as you follow the waste paper baler's operating rules and be careful and meticulous in your usual work, there will be no accidents. In recent years, waste paper balers have continued to suffer casualties in various places.

According to the analysis of industry experts, the design of individual waste paper balers is unreasonable, the product quality of the manufacturer has problems, the waste paper balers are poorly maintained, the control system fails, the operators do not abide by the safety regulations, and the operators and management personnel cannot get a lot of information. Good professional training, individual or even untrained work without a license, unskilled operations or misoperation of operators are the main causes of accidents.

Small waste paper baler is a commonly used waste paper packaging machine. With the popularization of small waste paper baler, many safety problems have also arisen during the use of small waste paper baler. Analyze the reasons, except for other subjective reasons. , As far as the small waste paper baler is concerned, there are also the following problems:
On the one hand, there is manufacturing: mainly because manufacturers do not produce according to standards and specifications. There are two reasons for this. One is that the manufacturers themselves do not understand or understand the standards and specifications, and the other is that manufacturers are catering to the market in order to reduce costs. Cancel some safety protection devices.
The second aspect is the use: how to use and operate the equipment correctly is very important, that is to say, the human factor is the key. Because the quality of small waste paper baler users is generally low, they lack the necessary safety knowledge and safety awareness, and safety training Insufficient efforts often result in some safety accidents.
The third is the installation: most of the current small waste paper balers are installed by construction companies themselves. Due to weak technical force, poor personnel quality, and ignorance of standards and specifications, there are many problems in installation, so there is an urgent need to standardize management in this area. .

NICKBALER waste paper baler as a practical machine, even if there are some objective problems, as long as we remain vigilant subjectively and always tighten the string of safe production, we will definitely be able to reduce the harm caused to us in the process of waste paper packaging. And loss.

NICKBALER waste paper baler has the advantages of beautiful appearance, simple operation and high production efficiency. You are welcome to come and buy, contact 86-29-86031588

2022-04-21

Metal shears are currently mainly used for shearing various metal plates, and are ideal equipment for charge processing in rolling mills, non-ferrous metal plants, and smelters.
Scrap metal is also a kind of resource, and all countries have specialized units operating the recycling and utilization of scrap metal business. The recovered scrap metal is mainly used for re-furnace smelting and converted into recycled metal.
The scrap metal shearing machine industry is developing rapidly. The market competition is fierce. With the development of science and technology, the scale of my country's shearing machine is continuously expanding, and it is accelerating to the integration of optical and electrical machinery and automation. The scrap metal shearing machine has become my country's machinery. One of the top ten industries in the industry, but in the increasingly fierce market competition, there is still a lot of room for improvement.

Therefore, only by constantly thinking of ways to turn the shortcomings of others into their own advantages, enterprises can survive in the cracks through continuous learning and innovation, and stand out among many manufacturers, so that they will not be eliminated and stabilized in the fierce competition. Own market position.

NICKBALER metal shears will not produce industrial "three wastes" during use, and have no adverse effects on the environment and energy. Contact number 86-29-86031588

2022-04-20

The hydraulic baler has been widely used in the market, but in the course of use, some friends reported that the noise of the hydraulic baler occurred, which would have a great impact on the user's use in severe cases. Therefore, in order to better solve this problem, Next, we will understand the equipment noise problem.
The hydraulic drive used by the NICKBALER hydraulic baler is stable and reliable when working, and safety is guaranteed. However, there are user reactions. During the use of the hydraulic baler, noise will be emitted, but sometimes the noise is not there. What kind of phenomenon is this? ?
For this problem, our company has made a summary, such as the occurrence of oil trapping in the oil pump, the large error of the gear oil pump tooth profile, the jamming of the blade or the plunger, etc. will cause noise, the valve core and the valve body are not well matched, or the surface Scratching, impurity in the oil blocking the valve hole, fatigue or damage of the spring in the valve, and inflexible movement of the spool will cause noise.

If there is a noise problem of the hydraulic baler, we must find the cause and deal with it as soon as possible, so as not to delay production and increase the cost of use. Our users should also learn more about relevant knowledge in daily use, and some minor problems should be timely. Solve it so as not to cause more trouble.

NICKBALER has been committed to the research of various hydraulic technologies for more than ten years, and has a team with rich experience and strong technical force. 

2022-04-20

The straw briquetting machine can turn straw and sawdust into treasure, which can increase farmers' income, protect the environment, and solve the difficult problem of large garbage and straw for governments at all levels.
The investment of straw briquetting machine is very profitable. It is a good choice to invest in building a straw recycling plant. The risk is small, the profit is large, and there must be unexpectedly rich returns.
Investing in the construction of a straw recycling plant requires the purchase of a complete set of equipment for the briquetting machine production line, including conveyors, crushers, briquetting machines, balers, etc. Customers should purchase equipment according to their own needs and production requirements.

Nowadays, there are more and more people using briquetting equipment, and there are many types, such as straw briquetting machine, straw briquetting machine, etc. Among them, straw briquetting machine manufacturers should pay attention to product quality issues in their daily production. And after-sales service issues, only in this way can we be invincible in the fierce competition.

The NICKBALER straw briquetting machine is simple and convenient to operate, the machine is safe and reliable, and can be customized according to the actual needs of customers. Contact number 86-29-86031588

2022-04-19

Electrical automation is one of the norms of industrial development, accompanied by the development and innovation of science and technology. The development trend of industrial equipment gradually opening up to automation technology and operation has reduced the number of manual service workers. In the waste paper baler machinery and equipment manufacturing industry, it is gradually moving towards this direction. Most of today's waste paper balers are fully automatic and fully automatic. Gradually replace the manual waste paper baler machinery and equipment. Compared with the manual type, the automatic waste paper baler has many advantages, otherwise it will not be promoted so quickly in the sales market.

The related operations of the fully automatic waste paper baler are controlled by PLC programming, just like a small computer to control the machinery and equipment. Complete button or touch screen control, human factors operation is convenient and stable. Improve manufacturing stability. In addition, the high efficiency of the waste paper baler with automatic technology is improved. Since the whole process of baling is automatically controlled by the program flow, it is more accurate and immediate relative to the control of human factors, which improves the high efficiency of packaging.

The NKW series horizontal baler produced by NKBALER can freely set the length of the package, accurately record the value of the package, and is convenient for the operator to use.

2022-04-18