WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

Case Center

You Position : Home >> Case Center
  • A. Analysis of common failures of vertical hydraulic baler
    1. The machine is not working, but the pump is still running
    2. The direction of rotation of the motor is reversed, check the direction of rotation of the motor;
    3. The voltage of the motor is too low to operate normally under the existing load, check the voltage;
    4. Check if there is any hose leakage or being pinched in the hydraulic pipeline;
    5. Check whether the hydraulic oil in the oil tank is sufficient (the liquid level should be above 1/2 of the tank volume);
    6. Check whether the suction pipeline device is loose, whether there are capillary cracks in the suction port of the pump, the suction pipeline should always have oil and no bubbles.
    B. The machine runs too slowly
    1. There is something blocking the suction filter, vent cap or pressure filter, or the hose is clamped;
    2. The motor voltage is low;
    3. The motor is overheated.
    C. Incorrect wiring
    1. The pump is overheated due to lack of oil;
    2. The hydraulic oil is too thin or too thick;
    3. Oil leakage or oil sprayed from the fuel tank, the ventilating plug causes the pressure of the fuel tank to increase, and the oil is sprayed out. Clean the ventilation holes or change to a ventilation device.
    D. The machine can't work, the motor can't run
    1. The control fuse is broken;
    2. The motor starter is disconnected;
    3. The fuse of the lead wire is broken;
    4. Check the transformer;

    5. Check button.

    NICKBALER specializes in the development and manufacturing of environmentally friendly waste compression equipment. https://www.nkbaler.net
  • Standardization is an important means to ensure the quality of baler equipment. Standardization is closely related to the management of the quality of the baler equipment, and the use value of the baler equipment reflects the quality of its quality. From the perspective of quality management, quality management refers to a series of processes from market research to packaging machine R&D and production to inspection and testing to after-sales service. Is it completed with reference to the corresponding standards or procedures? Is there a corresponding reliable and complete quality system Guarantee it. The process of standardization is through the formulation and implementation of standards to achieve the manufacturer's business objectives of improving the quality of the baler equipment, so as to ensure the quality of the baler equipment, reduce production costs and improve work efficiency. Standardization is the basic basis for communicating with Baler manufacturers to organize modern collaboration and production. If a Baler manufacturer does not have a set of strict standards as a management basis, and our production and sales links are not regulated by standards, then various tasks are destined to be difficult to carry out, and production activities and related production operations, sales and other activities are also not available. Normally, so the Baler machine manufacturer should carry out scientific management, it is necessary to carry out standardized management of the business activities of the Baler machine manufacturer according to the law of market economic development and the law of production technology development.

    After more than ten years of development, Nick Straw Baler has formed its own management characteristics to keep up with the market.
  • The role of waste paper baler in our production and life should not be underestimated. Because of its excellent performance, it can effectively improve work efficiency, so it has been unanimously recognized by consumers. With long-term use, the wheels of the baler will be damaged. Why? Let Nick Machinery solve the puzzles for everyone!
    1. In the process of daily use, the wheels will be damaged due to the attack of the waste paper baler. During the balanced operation of the wheel, it will not be affected by frictional resistance. Wheels and rolling bearings are not easily damaged. Once external working pressure is applied, the rolling bearings will be destroyed.

    2. During the packaging process, the waste paper baler pins are affected by the driving force during operation, and frictional resistance will cause the wheel to deform or even be destroyed. Therefore, when the baler wheels and rolling bearings are running, be sure to pay attention to this problem.

    3. The sharpness of the blade position of the baler determines the service life of the equipment wheel.
    4. The product quality of wheels is very important. Choosing rigid ball type rolling bearings is very easy to cause damage to the wheel. Therefore, it is the preferred standard to use needle roller bearings to replace rigid ball type wheels. In addition, the total supporting area of the wheel needs to be increased. .
    5. When the waste paper baler is packing, it is necessary to ensure the smoothness and smoothness of the road surface.
    The reason for the damage to the wheel of the waste paper baler is here for everyone. I hope it will be helpful to you. If you have other doubts, please feel free to contact us www.nkbaler.com.
  • When metal castings are cut,the chips account for about 20% of the weight of the castings,up to about 30%. Recycling aluminum scraps in the machining process of products can reduce production costs and has good economic benefits.The following points should be considered for aluminum scrap recycling:

    1.When the workpiece of a certain material grade is processed,it should be collected in time to prevent metal chips from mixing.When recycling,all metal chips in the chassis of various machine tools participating in the cutting should be cleaned up.

    2.The recycled metal scraps should be stacked in the designated bins strictly according to the grade classification and classification,and the type and brand of the metal scraps should be marked.If possible,they should be remelted in time to avoid mixing numbers.

    3.Avoid mixing metal chips with debris,cotton yarn and other debris.

    Nick brand scrap metal baler is safe,reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate,and is a good helper for your production.
  • First of all, the speed of the beverage bottle Baler machine: The manufacturer must decide the speed of choosing and purchasing the beverage bottle Baler machine according to their own requirements and combined with the previous production line, sum up and consider the perfect match of talents, and achieve real optimization, rationalization, and uniformity .

    Beverage bottle Baler machine is used to knead and sturdy beverage bottles and similar products under normal conditions, and package them with special packaging tape to greatly reduce the volume, and then achieve the purpose of reducing transportation volume, saving freight, and adding benefits to enterprises. The introduction of advanced technology and advanced technology of similar products at home and abroad.

    Secondly, the accuracy of the beverage bottle packaging machine: the labeling process is attributed to the final packaging process of the product. The quality of the labeling is directly related to the appearance and marketing of the product. The labeling accuracy is high, the printing effect is good, the label is flat, not wrinkled, and does not bubble. It is a symbol of high-quality products, otherwise the product level will be reduced invisibly.
    Finally, the stability of the beverage bottle packaging machine: a good beverage bottle packaging machine requires reasonable mechanical structure design, regular layout of various lines, stable component structure, and high mechanical and electrical quality to ensure that the machine works normally under long-term high-load conditions. , The long-term stable work of the beverage bottle balers can reduce the maintenance and repair costs of users, and can satisfy the reasonable production requirements of users, and bring quality assurance to manufacturers and a leap in output value.

    In the final analysis, the important factors that affect the labeling quality and stability of the beverage bottle balers are the control system and the motor system. Now most manufacturers of beverage bottle balers in Asia and even the world use stepping motors combined with PLC program control.

    Nick Baler is committed to the production of balers, with a complete range of features, such as reasonable design, beautiful models, convenient operation, and accurate accuracy. In the future, it will continue to research and innovate to better serve consumers and make consumers more assured.
  • The Corn stalk straw baler has developed rapidly in China's packaging industry, and the Corn stalk straw baler has become an indispensable item for many companies, so what is the future prospect of the Corn stalk straw baler? Today we will talk about the future development prospects of Corn stalk straw baler.
    Technological process is an important index basis for measuring whether an enterprise has the ability to improve its predecessors, whether it has market competitiveness, and whether it can continue to lead its competitors. With the rapid development of my country's Corn stalk straw baler market, the application and R&D of core production technology related to it will surely become the focus of attention of enterprises in the industry.

    Understanding the research and development trends, process equipment, technology applications and trends of the core technology produced by the Corn stalk straw baler at home and abroad is very important for companies to upgrade product technical specifications and improve market competitiveness.

    China's Corn stalk straw baler industry started more than 20 years later than developed countries, but in recent years, China's Corn stalk straw baler enterprises have continuously strengthened their self-improvement, and coupled with the strong support of the government, China's Corn stalk straw baler enterprises have achieved certain results in the packaging industry. Grades,

    By referring to a large number of patent documents, a systematic introduction to the technological progress of the Corn stalk straw baler is provided. Through specific investigations and the collection of powerful technical information and related information, the company provides customers with the core technology application status of Corn stalk straw baler products, technology development, Information on various aspects such as process equipment support and high-end technology application is very useful for enterprises to understand the production technology and development status of various hydraulic baler products.
  • This is NKW160BD Horizontal baler machine for pet bottles purpose,and delivery time India,Chennai city .

    the bale size is 1000*1000 *1700mm,the bale weight is 780kg with pet bottles ( very clean) .

    if any require,kindly contact with me:008 1502163 1102 

    Shaanxi Nick machinery equipment can supply many kinds of baler machine 
    Waste paper baler machine,plastic baling machine,metal press,sawdust bagging machine,rice husk baler machine ,rag bagging machine,tire baler machine,used cloth baling machine,and many kind of strapping machine ,compactor,baling press machine as so on . 
    For more information,please visit:www.nickbaler.net or www.nkbaler.com 
    even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time.

  • This NKW160BD Horizontal Baler to Kuwait.with 1100*1250*1700mm ,

    bale weight 1250kg for cardboard paper purpose .

    Waste paper baler is an environmentally friendly equipment. As a material processing equipment, what are its advantages? In recent years, the development of waste paper baler can only be described as soon as possible

    this machine bale size :1100*1250*1700mm ,bale weight 1200-1300kg ,capacity is 8-10 ton per hour .

    for more information ,please visit : www.nickbaler.net or www.nkbaler.com even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

Shaanxi Nick Machinery Equipment Co.,LTD 
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top