The gear on the hydraulic metal chip briquetting machine plays a very important role in the work of the equipment and cannot be bent. If it is found to vibrate when it is running at a slow speed when starting up, there are generally three reasons:
1. The four pillars are too tight. Treatment method: You must add some hydraulic oil to the four columns in the hydraulic metal chip briquetting machine.
2. The pressure of the support valve in the lower chamber of the master cylinder is unstable or the support force is too low. Solution: The support valve in the lower chamber of the master cylinder is unstable. The pressure of the support valve can be appropriately increased or decreased, or the spring can be replaced.

3. There is a problem with the pilot solenoid valve of the support valve in the metal chip briquetting machine equipment. Treatment method: Whether the spool of the solenoid valve is flexible, whether the matching gap is too large, and deal with the phenomenon of leakage.

Choosing Nick Machinery hydraulic baler, independent hydraulic system, servo system control, is the best choice to help you solve and recycle waste. 

2023-12-01

The servo system hydraulic baler is an advanced packaging equipment that combines the characteristics of the traditional hydraulic baler and has many advantages.
Nick Baler is one of the excellent brands of servo system hydraulic balers.

Nick Baler servo system hydraulic balers offer greater accuracy and stability than traditional hydraulic balers. It uses advanced servo motor control technology to achieve precise compression force control, ensuring that each packaging bag can achieve the ideal compression effect. In addition, Nick Baler also uses advanced sensor technology to monitor various parameters during the packaging process in real time, such as pressure, temperature, etc., thereby ensuring the stability of the entire packaging process.

In addition to high precision and stability, Nick Baler servo hydraulic balers are also fast. It adopts advanced hydraulic transmission technology to achieve rapid compression action, thereby improving packaging efficiency. In addition, Nick Baler also adopts an advanced automated control system that can realize automatic feeding, automatic compression, automatic sealing and other functions, thus further improving packaging efficiency.
In short, the Nick Baler servo system hydraulic baler is an advanced packaging equipment that combines the characteristics of traditional hydraulic balers and has the advantages of high precision, high stability, and rapidity. It can meet the needs of various industries for packaging equipment and provides strong support for enterprises to improve production efficiency and reduce costs. If you are looking for a great servo hydraulic baler, then the Nick Baler is definitely worth your consideration!

2023-11-30

The wood shaving machine is mainly used to mass produce thin flakes with uniform thickness. It is an automatic wood shaving briquetting machine. It includes a frame, a platform placed on the frame, and a knife holder fixed on the platform. The wood enters the machine from the feed port, slices through the blade inside the machine, and produces shavings. The shavings come out with uniform size and thickness, and wood There is no difference between the shavings produced by hand in the factory
Wood planer use:
1. It can be used as particle board (plywood), paper mills as raw materials for wood pulp paper, and transportation companies as filling materials for fragile products.
2. It can be used as filling material in the nests of small pigs, cattle, sheep and various animals, and can also be used as bioenergy.
3. The shaving briquetting machine can process logs, branches (twigs) and board edges into shavings. The shavings produced are the same as those produced by furniture factories. The automatic feeding equipment greatly improves the production speed.

4. The cylinder pressing device and hydraulic reciprocating motion device are used to make the contact pressure between the wood and the shaving knife uniform, and to process thin shavings with uniform thickness.

The shaving briquetting machine produced by Nick Machinery has always had its own uniqueness, because we believe that only by making our products more refined and distinctive. Only by making users and friends more satisfied can we have a good market. You are welcome to come to Nick Machinery website for consultation: https://www.nkbaler.com.

2023-11-27

The large-scale plastic crusher is a machine that crushes the input materials through the conveyor belt. When the machine is working, the motor drives the rotor to rotate at a high speed, and the materials enter the crushing chamber evenly, and the high-speed rotating hammer impacts, shears and tears the materials. The material is crushed.
Features:
1. Thick and heavy moving knife, high crushing efficiency, the knife is made of alloy steel casting, strong and long service life.
2. The frame plate is thick, can resist high torque and is very strong.
3. Fully automatic control is adopted, with start, stop, reverse and overload automatic reverse control functions.
4. The equipment has the characteristics of low speed, high torque, low noise, and dust can meet the standard.
5. Easy to adjust, low maintenance cost, economical and durable.

6. The thickness of the tool and the number of claws can be changed according to different materials.

Nick mechanical baler is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. https://www.nkbaler.com

2023-11-24

The hydraulic gantry shear cuts the messy recycled waste into a unified and easy-to-regenerate material, which increases the sales channels of the material. Today, I will talk about the tips for using the gantry shear.
Tips for using the gantry shearing machine:
1. The thickness of the sheared steel plate must not exceed the performance of the gantry shears. The workpiece must be compacted when cutting the plate.
2. When the gantry shearing machine cuts narrow steel plates, when the vertical pressure device in front of the gantry shears is not available, another steel plate should be pressed on the steel plate to be cut, so that the vertical pressure device can press the plate firmly when it falls, so as not to be damaged during the shearing process. The steel plate being cut at the time is warped and damages the machine tool.

3. When feeding the gantry shearing machine, you must wait for the upper scissors to stop before feeding.

NICKBALER hydraulic gantry shearing machine has small investment, fast profit, simple operation, and can be customized according to the actual needs of customers. https://www.nkbaler.com

2023-11-23