Regardless of the price of the waste paper baler, regardless of weight. The price of each piece of waste paper baler for equipment is very cheap. In fact, this is a big misconception. At this stage, some agents produce net weight packaging from manufacturers, only considering the net weight of a single roll, rather than the calculation of the length of the whole bundle. Different waste paper baler manufacturers are likely to produce waste paper balers of different specifications and different thicknesses. . Similarly, different types of waste paper balers are different in thickness, which makes it possible for manufacturers of waste paper balers with the same length to produce waste paper balers of different specifications.
The whiter the waste paper baler, the better. Some waste paper balers are manufactured using purchased raw materials, but the color tone of the purchased raw materials waste paper baler is not white. The fineness of the equipment waste paper baler is actually fluorescent Brighteners, calcium bicarbonate, chemical raw materials,

This kind of fineness is different from the raw materials. The fineness of the waste paper baler is a bit completely transparent. Of course, the fineness of the added fluorescent brightener is too shallow. This type of fluorescent brightener will not only harm the waste paper baler. The support and adhesion strength will continue to cost the waste paper baler.

Nick Machinery is a professional service manufacturer specializing in the development, production, sales and service of hydraulic machinery and packaging machinery. Feel free to contact us at 86-29-86031588 or https://www.nkbaler.net

2023-07-27

When choosing a waste paper baler, you need to pay attention to the following functions:
1. Can be used: Products that cannot be achieved even if the function is basically used are substandard products. It cannot be put into production, has no use value, and the equipment itself has no value. Among the packaging machine manufacturers, there are some small companies that are filling substandard products and putting them on the market.
2. Easy to use: Evaluate the usefulness of the waste paper baler, including equipment efficiency, failure rate, working hours, maintenance, etc. Such equipment can complete the workload and enable production to continue.
3. Scope of application: There are many types of equipment. Generally, one type of equipment can meet the production needs of various packaging stations. However, considering the amount and packaging of raw materials, an applicable device is required. This saves investment and obtains many benefits.

The waste paper box baler pump has the advantages of high rated pressure, compact structure, high efficiency and convenient flow adjustment. It is widely used in high pressure, high flow and flow demand adjustment, such as waste paper box balers, construction machinery and ships. Piston pump is a kind of reciprocating pump that generates high pressure.

Nick Machinery supports product customization, available from stock, and supports customized production models and specifications. For details, please call customer service. https://www.nkbaler.com

2023-07-24

1. The tape length control potentiometer is at the zero position. The tape length control potentiometer is at the second position from the left on the front panel switch plate. Adjust clockwise, the length of the tape out will be longer, otherwise it will be shorter; if it is at the zero position, the tape will not be out.
2. The belt is not worn correctly. Open the right door, and follow the "threading process method" or the drawing diagram of the belting indicated in the instruction manual to correctly thread the belt.
3. There are foreign objects in the machine. The packaging machine has been used for a long time, and it has not been cleaned and maintained in time, resulting in the accumulation of stolen goods in the machine and the unsmooth delivery of the belt. More cleaning and maintenance should be done.
4. The gap between the belt feed rollers is incorrect. The size of the gap between the belt feeding rollers of a pair of semi-automatic baler is very important to the normal belt feeding. For the adjustment of the gap, please refer to the instructions in the manual. Adjust carefully until the gap between the belt feed rollers is only 0.05-1mm more than the 
belt thickness.
5. The selected PP tape is too thick or too thin. Because there are many manufacturers of PP strapping belts, the thickness is also inconsistent, so you should choose them according to the requirements; if it is impossible, please carefully adjust the gap between the feeding and rewinding rollers according to the method of the manual.

6. The electromagnet is not working properly. The electromagnet does not work. First check whether the welding head of the electromagnet connection is off, and then check whether the coil is burned out. If there is no abnormality in both, check whether the electromagnet is displaced or blocked by stolen goods, making the head unable to move freely.

NICKBALER company is determined to provide high-quality fully automatic horizontal baler products for the majority of demand groups, and always adheres to the principle of integrity and reciprocity, and insists on using sincere service to impress customers. https://www.nkbaler.com

2023-07-07

The use of equipment requires protection, and the hydraulic baler is no exception. As far as the hydraulic baler is concerned, the protection operation is mainly composed of three parts: 1. Daily protection. 2. Professional protection. The following is a detailed introduction to these two kinds of protection tasks which need to be done in detail.
The daily protection is mainly carried out by the operator of the hydraulic baler, checking before the shift and cleaning after the shift to ensure that the mechanical and electrical equipment is in an outstanding technical condition. Timed protection is also called first-level maintenance, which is carried out by the mechanical protection division of the operating unit and assisted by repair personnel. It is similar to a minor repair, and the protection period varies with different electromechanical equipment. The content includes disassembly inspection of maintenance parts and key parts; cleaning and dredging of oil circuit and smooth system; adjustment and inspection of the gaps of various parts; fastening of various components and parts; maintenance and repair of electrical components, etc.

Professional protection is justified by professional personnel. Generally, it is carried out by professional and skilled personnel from the manufacturer or seller of the machine. The work they carry out is more professional. Generally, the core components of the machine should be carried out on a large scale. Inspection and maintenance together should promptly discover potential faults and solve them in time to prevent users from appearing faults in the process of use and delaying production.

Nick Machinery is determined to provide high-quality fully automatic horizontal baler products for the majority of demand groups, and always adhere to the principle of integrity and reciprocity, and insist on using sincere service to impress customers.https://www.nkbaler.com

2023-07-05

When buying a metal briquetting machine, many customers will ask how long the warranty will last, worrying that the equipment fails and they don’t know what to do. The metal briquetting machine adopts advanced hydraulic transmission technology, uses high-quality wear-resistant oil seals, and the cylinder adopts the latest domestic high-tech technology to process and assemble, so as to ensure continuous operation without reducing the cylinder pressure, durability and smooth operation; computer control, high degree of automation, Low failure rate, easy maintenance, etc. The warranty period does not have much effect on the iron pin briquetting machine. It is more about the quality of the equipment and the after-sales service of the manufacturer. As a professional manufacturer of metal briquetting machines, Nick Machinery will introduce those things under the warranty period.
Metal briquetting machine is a kind of scrap metal recycling equipment. Now there are more domestic manufacturers, and their strength and service quality are not the same. Generally, the warranty period for domestically purchased metal briquetting machines is one year, and the failure manufacturers will provide maintenance and repair free of charge within one year. 
After the warranty period, the failure manufacturers will also solve the problem, but the service is paid.
Metal briquetting machines have a certain service life, and manufacturers will not always provide free services. If we want to use our equipment for a longer time, we need to pay more attention to the strength of the manufacturer and the quality of the equipment when we choose to purchase equipment. And the quality of after-sales service of the manufacturer, the maintenance and maintenance of the equipment should be paid attention to after the normal 
production of the equipment.

We cannot decide on the length of the warranty period of the metal briquetting machine, but we can take measures to increase the service life of the equipment and reduce the failure rate of the equipment. The waste paper baler is used to squeeze waste paper and similar products under normal conditions, so that the volume is greatly reduced, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. The introduction of advanced technology and advanced technology of similar products at home and abroad.

You can choose powerful manufacturers, choose high-quality equipment, and pay attention to equipment maintenance during production to avoid failures. https://www.nkbaler.net

2023-07-03