WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • work process
    1. Before starting the waste paper baler, check whether the appearance of the equipment is abnormal, whether there are any safety hazards around, whether the iron wire or plastic rope is sufficient. After confirming the normal, open the main air switch of the distribution box, unscrew the emergency stop button, and the power indicator of the electric control box lights up.
    2. Remote local gear selection switch to remote control.
    3. Put the magnetic switch on the remote control into the card slot and press the system start button on the remote control twice. After the alarm sounds for 10 seconds, stop the warning device to run. The red alarm light is always on.
    4. Press the conveyor start button on the remote control, the conveyor belt runs, push the paper or other material into the conveyor inlet, and the conveyor belt brings the material into the packing inlet.
    5. After the paper or other material arrives at the position, press the compression button on the remote control, the red alarm light will flash, and the pressure head will automatically retreat and stop after the pressure is in place (if the compression is started, the pressure head will go to a certain position, and it will not stop. After tens of seconds, it will automatically return to the return position. When returning, the siren will alarm at 1 second frequency. At this time, the arm type will be automatically pressed to loosen the arm on the remote control, so that the arm is released, and then the compression is started until normal. Then alarm. Manually report the arm type with the jack on both sides of the arm, the two sides of the screw rotate into some distance, and then start the compression until the normal does not alarm).
    6. Repeat 4 operations until the required packing length, press and hold the bale button on the remote control for 2 seconds, the device will start automatically, and the indenter will stop when it advances to the front packing position. After the in-position, the siren will sound at 3 seconds. Call the police.
    7. Press the threading button on the remote control, the threading machine will automatically thread the wire or plastic rope, and the threading machine will automatically return to the original position.
    8. Cut the wire or rope to a knot and end it.
    9. Repeat steps 4-8 above. The bag that is out of the bag will be launched one by one, and the finished bag will be placed in a suitable place by a car or forklift.
    10. After the waste paper baler has finished working, press the remote control system stop button, take off the magnetic switch, press the electric control box emergency stop switch, and turn off the main power.
    2019-01-05
    Share:
  •  The reason why the automatic waste paper hydraulic baler can spare no effort to go forward, the big pillar is high technology. The powerful hydraulic baler has strong strength and has advanced development pursuit. In the process of creating dreams, the automatic waste paper hydraulic packaging opportunity breaks the routine and pursues its own value.
           Serving the society, on the road of hard work, some are ambitious, and some are bold pursuits. The automatic waste paper hydraulic baler absorbs the high-tech and does not look back. The power of the automatic waste paper hydraulic baler is strong. This is also inseparable from the insistence on absorbing high technology. It is necessary to minimize the loss and help to eliminate the fault in time to achieve a win-win situation. The desire to mature is the requirement of the automatic waste paper hydraulic baler. A better struggle is for faster growth. The fully automatic waste paper hydraulic baler will not forget the original promise, and it is necessary to insist on giving the market the greatest help. . The automatic waste paper hydraulic baler is a product of the development of the times. With the continuous development of the economy, the market of fully automatic waste paper hydraulic balers has grown stronger. The automatic waste paper hydraulic baler has the beauty that can be seen, believe in its value, and believe in the importance of service capabilities.
     

    2019-01-04
    Share:
  • The production of waste paper balers is also inseparable from the performance of the cylinders. The performance of the waste paper baler cylinders determines the stability of the waste paper balers. High-quality performance: All products have different components. They are developed and designed by different departments and work together to give full play to the unique advantages of each department. And implement the problem responsibility system, the waste paper baler manufacturers have increased the importance attached to the quality of employees.


    Many waste paper baler manufacturers have seized this opportunity to develop more comprehensive equipment, and waste paper balers have shown obvious advantages, so more and more users are increasingly recognized. Purchase waste carton baler equipment should pay attention to avoid installation, maintenance and sales are out of touch. In the peak season, the purchase of waste carton balers is easy to encounter this way: due to the large increase in the purchase of waste carton balers, customers pay a deposit, reliable quality. The content is the user's own waste paper baler manufacturer. To avoid such a situation, consumers must be aware of the situation of the manufacturer before purchase, and be prepared.

    The quality of the hydraulic oil selected by the waste paper baler, the quality of the hydraulic oil directly determines whether the cylinder can play a large role, and the waste paper baler also directly affects the failure rate and service life of the cylinder. Automatic waste paper baler equipment operation safety knowledge, waste paper baler manufacturers automatic waste paper baler equipment safety issues are just a matter of concern. Regarding the topic of security, we must always pay attention to it, or if it is not, it will be a heavy loss. Of course, it is no exception in the process of using a waste paper baler. In the steps of using the waste paper baler equipment, it is necessary to remember that you must not put your hand directly on the heating sheet, which is not suitable.
    2018-12-28
    Share:
  • The poor production efficiency of the straw hydraulic baler will cause great inconvenience to everyone, and Shaanxi Nickel Machinery Co., Ltd. summarizes the reasons for the poor production efficiency of the equipment. China's straw hydraulic baler has been continuously innovated by foreign influences, constantly developing new technologies. In use, attention should be paid to the ingress of moisture, as this will affect the normal use of the straw hydraulic baler and degrade the performance of the machine. The moisture here refers to the influence of cooling water and steam around it.
        1. The direct influencing factors of the production efficiency of the straw hydraulic baler: the model specifications of the package, the different output of the model, and the different specifications directly determine the production efficiency of the baler. The production efficiency of the conventional straw hydraulic baler is higher than that of the device with the gate.
        2, the production of straw hydraulic baler is also inseparable from the performance of the cylinder, the performance of the cylinder determines the stability of the waste paper baler. To ensure the production performance of the products, we must choose the exquisite manufacturer of the cylinder production process. The inner and outer chains of the waste paper baler chain are kept lubricated. When HJ20-HJ40 mechanical oil is added, when the film frame moves up and down and there is jitter, it can be eliminated by tensioning the chain. When the turntable becomes slow or slips, open the turntable motor cover, loosen the four connecting bolts on the speed reducer mounting plate, and then evenly adjust the two tension bolts clockwise to achieve the required tension and tighten the four connecting bolts. The electrical cabinet should be closed, and the electrical components and electrical connections should be cleaned regularly to ensure the normal use of the equipment. The goods must not exceed the design packaging height, otherwise it will affect the packaging effect.
        3. The convenience, control performance and low failure rate of the straw hydraulic baler control system also determine the packaging operation efficiency.
        4. The quality of the hydraulic oil selected by the straw hydraulic baler, the quality of the hydraulic oil directly determines whether the cylinder can exert a large effect, and also directly affects the failure rate and service life of the cylinder. To ensure the production of straw hydraulic baler, we must use high quality and authentic 46 anti-wear hydraulic oil.
        The above is the reason I have summarized for you and I hope to help you.
     

    2018-12-17
    Share:
  • With the development of the economy, the advancement of the times, and the advancement of the science and technology of the straw hydraulic baler, the new packaging machinery has been able to surpass this requirement in various aspects, not only allowing people's hands to have more choices from the operation. Also, there have been improvements in functionality. Everything about this is inseparable from the security of the ring. The efficiency of waste paper recycling and waste paper will inevitably lead to further development in the future. It is said that the process of straw hydraulic packaging industry is developing very well. The waste paper baler is of high quality and good equipment coordination. It is now a relatively reliable baling machine on the market. Welcome all walks of life to come and inquire, and the process of development is coming.
     
        The straw hydraulic baler must learn to learn from each other in the competition, learn quickly, and develop innovatively. This way, the advantages of the straw hydraulic baler equipment can be further highlighted, and a certain social status can be maintained in the increasingly harsh living environment to achieve sustainable development. Our straw hydraulic baler equipment has been in the forefront of technological development for more than ten years. We have been firmly grasping the market development direction of waste paper balers, mastering market dynamics, designing more advanced packaging equipment, and sincerely welcome big guys to come. www.nkbaler.net
    2018-12-17
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top