WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • The two-cylinder vertical waste paper baler is no stranger in China, so how to correctly use the two-cylinder vertical waste paper baler? Let's talk with you today.
    The double-cylinder vertical waste paper baler has good rigidity and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment foundation engineering. The double-cylinder vertical waste paper baler is widely used in various waste paper factories and old materials recycling companies. It is suitable for packaging and recycling old waste paper and plastic straw, which is to improve labor efficiency, reduce labor intensity and save manpower. Good equipment to reduce transportation costs.
    1. This machine is suitable for: compression and packaging of loose materials such as waste paper and newspapers.
    2. This machine uses high-performance, low-noise hydraulic circuit system and adopts imported hydraulic components; the performance of the whole machine is stable and low vibration.
    3. Reasonable double scissor scissors design improves paper cutting efficiency and prolongs blade life.
    4, fast, simple wire-wound device, low failure rate for easy cleaning and maintenance.
    5, freely set the length of the package, accurately record the package value.
    6, easy to install, no special site infrastructure.
    The above is the use of the two-cylinder vertical waste paper baler, I hope to help everyone, more about the problem of the two-cylinder vertical waste paper baler, welcome information we provide services for you.
    2018-12-08
    Share:
  • Things to pay attention to when operating hydraulic balers:
    1. The fuel tank should be cleaned and replaced with new oil once every six months, but the first time the filter oil can not be washed for more than one month, the new oil used once is strictly filtered and allowed to be used again.
    2. The hydraulic oil in the fuel tank should be strictly used. High-quality anti-wear hydraulic oil should be strictly used. It must be strictly filtered, and should always maintain sufficient oil. If it is insufficient, it should be filled immediately.
    3. The lubricating parts of the machine should be filled with lubricating oil at least once per shift as required.
    4. The debris in the bin should be cleaned in time.
    5. Those who have not studied, do not understand the structure, performance and operating procedures of the machine must not start the machine without authorization.
    6. When the machine is seriously leaking or abnormal during work, stop running immediately to analyze the cause and eliminate the fault, and do not force the disease to run.
    7. During the operation of the machine, it is not allowed to repair or touch the moving parts. It is strictly forbidden to press the material in the bin by hand or foot.
    8. When adjusting the pump, valve and pressure gauge, it must be carried out by experienced technical workers. If it is found that the pressure gauge is faulty, it should be checked or updated immediately.
    9. Users should make detailed maintenance and safety procedures according to the specific situation.
    2018-12-06
    Share:
  • Whether the horizontal waste paper baler can operate normally should start from the initial installation of the baler. If the horizontal waste paper baler is installed without any installation, then the normal operation is carried out. The following is the horizontal baler should pay attention to during installation. What time is it:
    1. Construction and installation with reference to the foundation map. If the foundation and drawings are incorrect, adjustments should be made. In order to avoid the normal operation of the equipment after installation.
    2. After the installation of the mainframe, the level should be adjusted. The horizontality error is not more than 0.1mm/m. It can be adjusted by angle iron and iron plate. After adjusting the level, it is welded with angle iron, oblique iron and waste paper.
    3. The viewing platform and the loading port need to be tight and firm when installing. The welding port needs to be knocked out of the welding slag, smoothed and sprayed with anti-rust paint.
    4. Introduce electric wires and use plastic pipes to bury them or erect them at high altitude to prevent high voltage electric shock. And often check the safety of the circuit, found that damage and aging need to be replaced with time.
    5. Inject 46# anti-wear hydraulic oil (added to 80-90% of the tank volume), and often filter and replace the hydraulic oil as required.
    6. Indoor waste paper packaging machinery needs to pay attention to ventilation and heat dissipation, outdoor installation needs to pay attention to moisture and rain.
    2018-12-03
    Share:
  • The vertical waste paper baler has fine workmanship and good packaging effect. The characteristics of vertical waste paper baler: convenient material, simple structure, small floor space, beautiful appearance, hydraulic opening, high box, whole package once pressed, single The rope is worn on the surface, the pressure is large, the appearance is beautiful, and the installation is convenient.
    Uses: Mainly used in garment factories, garment and textile packaging stations for the compression and packaging of soft packs with packaging, but also for the compression and packaging of other kinds of soft materials.
      1. Mainly applicable to garment factories and waste recycling stations.
      2. Hydraulic configuration: The low-noise hydraulic circuit system combines imported and domestic high-quality components to ensure the quality and reduce the cost, and the performance of the whole machine is stable.
      3. Simple structure, low failure rate and simple and fast maintenance.
      4, easy to install, no need to strengthen the foundation.
      5, feeding mode: manual manual feeding.
          The above is the characteristics of the vertical waste paper baler. If you have any questions about the small waste paper baler and the vertical waste paper baler, please feel free to contact us.
    2018-12-03
    Share:
  • In the "Internet +" era, consumers are no longer purely passive customer roles, and more and more consumers are turning into participants in corporate behavior. For example, in the waste paper baler industry, if customers use good results, they will have a good reputation and will drive the development of the company.
          As the concept of green recycling is increasingly accepted by consumers, green recycling is the main theme of future development. First, the recycling entity should promote green recycling through all possible carriers. For example, through traditional media such as radio and television, actively organize various forms of publicity activities, advocate green recycling, publicize typical cases, promote demonstration experience, and create a good atmosphere for the whole society to attach importance to, care for and support the recycling of waste paper; through WeChat, etc. Since the media advocates from now on, start from the side, pay attention to environmental protection, support the recycling of green waste paper, and properly handle the waste paper around. Second, encourage enterprises, institutions, schools and communities to actively carry out various forms of green recycling waste paper creative activities, foster green culture; carry out resource-saving volunteer service activities, actively create recycling-oriented communities; gradually adopt environmental recycling and green recycling concepts And the knowledge is included in the relevant courses of “Basic, Vocational, and Higher Education”; relevant majors are set up in higher education institutions and vocational schools, and a multi-level interdisciplinary personnel training system is constructed. Third, do a good job in training of recycling personnel, continuously improve the skills and service levels of the industry; use the training strength of party schools, administrative colleges and higher education institutions at all levels to strengthen the training of leading cadres, government and enterprise management personnel at all levels. The fourth is to promote the transition to intelligent, automated recycling.
         In recent years, with the rising of labor costs, the arrival of the "Internet +" era, the traditional "individual recycling of waste paper" can no longer meet the needs of the times, should actively build waste paper packaging stations to carry out the packaging and recycling of waste paper
    2018-11-29
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top