Nowadays, all walks of life are developing rapidly and will have more or less damage to the environment, which makes the environmental protection industry and the derivative industry more and more involved. There are more and more garbage generated, and how to deal with garbage has become a major obstacle. Therefore, there are garbage disposal equipment and garbage compression equipment.
    From industrial enterprises, to commercial catering, from social services, to health care, from electronic technology, to leisure and entertainment, etc., all of these enterprises produce garbage. Moreover, the production of these garbage has also caused great harm to people's living environment. In the past two years, the global temperature has been volatile and the natural disasters have been frequent. These phenomena have proved the harmfulness of these garbage to people's lives, kitchen waste, and daily life. Garbage, medical waste, etc. need to be properly handled in order to avoid harm to society. Only by disposing of these garbage will the virus spread and the garbage be flying. Therefore, a series of environmental protection equipment such as garbage compression equipment and garbage incinerators have been produced, which effectively prevent the harm of the garbage team environment. Reduced unnecessary trouble for people.
    This shows that environmentally friendly equipment is an indispensable device for today's society and the most critical part of a huge commercial chain. I also hope that the environmental protection industry can continue to help people improve their living environment.

2018-11-29

    In recent years, the animal husbandry industry is developing rapidly, and the nutrient range after straw silage is very wide, which brings great convenience to animal husbandry. The green storage of straw feed through a straw baler is a good method for animal husbandry. Reasonably use the straw baler to extend the service life of the straw baler.
    Adjust the equipment straw baler should use the appropriate tools, pay special attention to strength. For example, if a tool with too small a strength is selected, the straw baler may not be properly adjusted, and if the tool is too hard, the straw baler itself may be damaged. Be sure to ensure that the screws are tightened and suitable for starting each time you start. For example, some need to pack waste paper. Straw balers often need to adjust the size of the package according to different needs. It is recommended to pay attention to the relevant adjustment knowledge before each adjustment.
   In normal operation, pay special attention to whether the straw baler is damaged, whether the random technical information is intact, and if problems are found, repair in time. In daily use, especially straw balers, more attention should be paid to keeping it clean. It is recommended that you wash at least once a week. After each cleaning, the cleaned lubricant should be injected into all parts of the baler.

2018-11-26

The development of intelligent straw hydraulic baler industry is more and more oriented towards the direction of automation and intelligentization. The intelligent straw hydraulic baler adopts hydraulic system for transmission, which has very obvious performance advantages!
Next, let the technicians of Shaanxi Nick Machinery Equipment Co., Ltd. analyze the performance advantages of the hydraulic transmission straw hydraulic packaging for the majority of users!
First, the hydraulic transmission power is stable and high pressure
The hydraulic system of the small straw hydraulic baler can continuously and stably generate the driving force. The pressure is larger than the pneumatic transmission device, which can effectively realize the operation of low speed and large tonnage. It is a feature that other types of transmission do not have!
Second, the structure is compact
With the same power, the hydraulic system transmission is smaller and more compact, and has better performance than pneumatic transmissions!
Third, good safety performance
The safety protection work of the small waste paper baler using the hydraulic transmission device is relatively easy, and the safety threat coefficient is small during operation, which can ensure the personal safety of the users!
Fourth, the hydraulic transmission noise is small
The small straw hydraulic baler uses the hydraulic system transmission device to greatly reduce the noise. If the pneumatic transmission system is used, the system work will generate a large noise, especially when exhausting, the noise is even louder!
Intelligent straw hydraulic baler will develop more advanced in the future, high pressure, low noise, long life, high efficiency, etc. Only by continuous improvement in technology, we can gain a foothold in the straw hydraulic baler industry!
Shaanxi Nick Machinery Equipment Co.,Ltd
www.nkbaler.com
Facebook:SXnickbaler
Tel: 86-29-86031588   Fax:86-29-86031588
Mobile :0086-15021631102  
What’s APP:008615021631102
Wechat:ligoodboy2010   
Skype:ligoodboy
Address: RongHao Industry Garden, Xi'an, Shaanxi, China

2018-11-23

Waste paper balers usually refer to a packaging operation in which single or several packs are tied tightly together with ropes, steel strips, and plastic strips for transportation, storage, and handling. The development of waste paper packers was very rapid. In the early 1960s, with the advent of polypropylene materials, polypropylene tape was successfully developed abroad. In many fields, especially light industry... Randomly adjusted balers improve the adaptability of automatic balers in terms of bandwidth, bale specifications, workbench height, and strapping capabilities.
.
China's waste paper packers began to develop in the mid-1980s. They were initially promoted in books and newspapers and periodicals distribution departments. In recent years, they have been developing rapidly. They have been widely used in light industry, food, foreign trade, department stores, printing, medicine, and chemical industry. Posts and telecommunications, textile and other industries.
At present, some manufacturers of waste paper packers adopt the international standards and absorb the advanced technical characteristics of foreign countries. They have greatly improved the level of standards, design and manufacturing technologies and product quality, such as the automatic waste of our Shaanxi Nick Company. Paper balers can reach the advanced level of similar foreign equipments in quality and can be automatically positioned, strapped and indexed to carry out cross-type and well-type pattern strapping. With microcomputer control, the unmanned automatic strapping production line has been realized. The future development trend of waste paper packers extends to full automation, advanced and diversified.
The development trend of waste paper packers mainly includes the development of balers for various applications such as compression balers; the development of heavy-duty belts and polyester belts that replace steel belts; and the development of foam belts and flexible belts suitable for table packers. Wait. To increase the degree of automation of the single machine, after the package is fed from the conveyor, the baler can be automatically positioned, strapped, indexed, and tied with cross-shaped, square-shaped patterns, etc., and the unmanned automatic strapping line can be controlled by microcomputer control.

2018-11-19

As you know, with the fast development of Agricultural , industrial and other business all over the world , More and more waste paper , waste plastic and waste metal are produced with large quantity .At this time , recycling these wastes come to be a trend . So all kinds of balers are following close on another. Now let us have knowledge of what a baler is.

A baler is a piece of farm or industrial machinery which is used to compress a cut and raked crop (such as hay, straw, or silage) into compact bales that are easy to handle, transport and store. Several different types of balers are commonly used, each producing a different type of bales – rectangular or cylindrical, of various sizes, bound with twine, netting, or wire. Industrial balers are also used in material recycling facilities, primarily for baling metal, plastic, or waste paper for transport.

Now all kinds of balers such as waste paper balers, used clothes balers, waste plastic balers, dedicated tire balers, dedicated block-making balers, and hydraulic metal baler are widely produced with first-class quality by so many businesses. If you are interested in or in badly need of balers, you can write email to me : sales@nkbaler.com   

Or you can call me :86-15021631102  . Here you can get you what you want, and Nick company can meet all requirements you come up with . 

2018-11-17