The straw briquetting machine does not cut down trees, and uses the materials of crops to turn waste into better ones, which protects the links and is clean and hygienic during operation. The products produced are chemical substances and have a long burning time.
Mineral water bottle baler This product has good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in various types of waste paper mills, used materials recycling companies and other unit enterprises. It is suitable for the packaging and recycling of used waste paper and plastic straws. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs.
  The straw briquetting machine relies on reasonable design and concept, low consumption and high efficiency, simple operation control, consumer trust, and has gained a broad market for development. There are business opportunities and it is a good choice for investors. Energy saving and green living are the fashion themes of today's society, and the straw briquetting machine is exactly a device that echoes this concept. It uses agricultural crops such as corn stalks, corn cobs, and leaves to produce emerging fuels and is a secondary use of them.
 The characteristics of straw (introduction: mature crop stems and leaves) briquetting machine are reflected in its raw materials and also in the following aspects:
 First, the design of the equipment is reasonable, quality, and easy to operate. It adopts fully automatic control of electric heating settings, which can randomly adjust the dryness and humidity of materials and work efficiency;
 Second, the equipment is small in size, takes up limited space, consumes less energy, saves energy and electricity;
 Third, the materials used in the equipment are processed and can be continuously produced with long working hours;
 Fourth, in terms of technology, the straw baler has increased the bearing from three to four for the stability of the machine and the life of the equipment, and the pitch and output have been increased. The waste paper packing machine is used to squeeze and solidify waste paper and similar products under normal conditions, and use special packaging tape to pack and shape, so that its volume is greatly reduced, so as to reduce the volume of transportation, save freight, and increase benefits for enterprises. Introduced advanced technology and advanced technology of similar products at home and abroad. The propeller uses a movable head and a movable rod, which reduces maintenance costs and facilitates production. In terms of equipment maintenance, the oil-lubricated lubrication was changed to oil-immersed lubrication, and the service life of the equipment.

  The straw baler adopts good equipment, and the quality can be determined based on the quality of the manufactured products, so that the equipment is excellent and the after-sale is good.as more information ,please visit :www.nkbaler.net

2020-03-10

Waste paper baler is an electromechanical product, which is mainly composed of mechanical system, control system, feeding system and power system. The entire packing process consists of auxiliary times such as pressing, returning, picking up, transfer, outboundand outbound.

Here's how to improve the performance of horizontal waste paper baler
1. Improve the entire floor area of the waste paper baler to achieve the smallest possible area and the largest compressive force.
2. Adopt the new rapid supercharging technology to realize rapid supercharging and improve the working efficiency of the hydraulic system.
3. For customers to maintain and maintain the hydraulic system of the hydraulic waste paper baler in a timely manner, especially to ensure the cleanliness of the hydraulic oil, to prevent the life and reliability of the hydraulic system caused by dirt, and affect the system, and timely adjust it to avoid Cause loss.
4. To improve the pressure loss of the internal flow channel, high-quality hydraulic components and integrated circuit and flow channel casting should be used to reduce the pressure loss of the pipeline and also reduce oil leakage.
5. Reduce the damage of the internal pressure of the component system of the hydraulic waste paper baler and reduce the loss of power.as more information ,please visit us : www.nkbaler.net 

2020-03-09

When selecting a piece of equipment, the first choice is a high-quality, high-quality waste paper hydraulic baler. A good waste paper hydraulic baler yields good returns. There are 4 sets of wire feeding devices for waste metal balers, each corresponding to a baling head, and each set includes a baling line conveying device and a baling line anti-tensioning device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The compactor wheels are guided to run along the outside of the two tracks, and hydraulic cylinders that push the compactor to run are arranged in it. In addition, in addition to the mechanical components, there is a complete set of hydraulic stations. It can be seen from the above description that various movements of the waste paper hydraulic baler are completed by the power of the fluid. The waste paper packing machine is used to squeeze and solidify waste paper and similar products under normal conditions, and use special packaging tape to pack and shape, so that its volume is greatly reduced, so as to reduce the volume of transportation, save freight, and increase benefits for enterprises. Introduced advanced technology and advanced technology of similar products at home and abroad. Fully automatic waste paper baler is a mechatronic product, which is mainly composed of mechanical system, control system, feeding system and power system. The entire packing process consists of auxiliary times such as pressing, returning, picking up, transfer, outbound, outbound, and outbound. Most consumers first consider the price of the device and then determine the nature of the device. Nowadays, the waste paper hydraulic balers are gradually increasing, and the industry's competitiveness is increasing. In order to stand out, it will continue to increase the production capacity of waste paper balers.
So how to improve the productivity of the waste paper baler, please see the following analysis: In order to improve economic efficiency, we start with increasing output, ensuring quality, reducing costs and maintaining repairs. Increase production according to customer needs and use the latest technological components in the process of packaging waste paper. One set of equipment does not have good quality and the others are nonsense. Such a device can only be used for a short time, and cannot be used for a long time. Therefore, when purchasing equipment, we must pay attention to the quality of the product, and we cannot blindly pursue the price. If there is nothing of high quality, the product will be unsold and backlogged, which will not only bring benefits, but even lose the market. We can't just see the immediate benefits, we must make long-term plans to use high-quality materials to increase the output of waste paper hydraulic balers.

2020-03-07

Hydraulic systems are widely used, so why use a hydraulic drive system? What is the principle of hydraulic transmission? What are the characteristics? This article takes you through a simple graphic to understand the hydraulic drive system together.
What is hydraulic transmission
Hydraulic transmission uses liquid as the working medium. The drive unit converts the mechanical energy of the prime mover into the pressure energy of the liquid, and then through the pipeline, hydraulic control and adjustment devices, etc., the actuator converts the pressure energy of the liquid into mechanical energy to drive the load Achieve linear or rotary motion.
Why use hydraulic transmission?
Why convert energy from mechanical energy to hydraulic energy and then hydraulic energy to hydraulic energy?
Almost all machinery or machines require a transmission mechanism. This is because the prime mover is generally difficult to directly meet the requirements of the actuator in terms of speed, force, torque or movement mode, and it must be adjusted and controlled through the intermediate link-the transmission device. Hydraulic transmission is one of such control methods.
Other transmission methods are:
Mechanical transmission: commonly used parts are gears, crankshafts, shafts, belts, etc.
Pneumatic transmission: air or other gas is commonly used as the transmission medium.
Electric drive: Common parts are DC motor, thyristor, AC motor, inverter, etc.

2020-02-18

NK30LT Used clothes Baler main used for used clothes ,garment ,used textile ,rag and so such this soft materials ,its use chamber lifting type ,The NK30LT Used clothes baling press success in the recycling baler sector is attributable to the unique lifting chamber loading system in combination with the manual control system. These two unique features allow the Nickbaler to function with a much lower labour input requirement and make our balers the got to machines for serious used clothes management compacting solutions.

Due to its compact design the nickbaler requires less valuable floor space in the business premises than other comparable balers.meanwhile ,NK50LT used clothes baler ,NK60LT testile press machine ,and other same model of compactor are very popilar in marketing .As a result of the lifting chamber system the Nickbaler is able to deliver increased hydraulic power from smaller horsepower electric motors. This means that the nickbaler is vastly more efficient than any other comparable baling equipment and saves the user money in decreased electricity charges.

Model	NK30LT
Hydraulic power	30Ton
Bale size（L*W*H）	600*400*400-600 mm
Feed opening size（L*H）	600*460mm
Chamber Size （L*W*H）	600*400*1200 mm
Bale weight	45-100Kg
Capacity	10-12 Bale Per hour
System Pressure	25Mpa
Packing materials	Cross packing
Packing way	Front-Back 4 pcs/ Left-Right 2 pcs
Voltage（can be customized）	380V/50HZ
Power	7.5KW/10HP
Machine size（L*W*H）	1300*760*3780mm
Weight	1800Kg

2020-02-16