The horizontal automatic packing machine can realize automatic packing, but the table has no power. It needs to be pushed manually before the packaged items can pass the packing machine. The principle of the baler is a machine that uses a strap to wrap the product or package, and then tightens and melts the two ends through a thermal effect or uses materials such as buckles to connect. The function of the strapping machine is to make the plastic tape tightly adhere to the surface of the packaged package, to ensure that the package is not scattered due to the unbundling of the package during transportation and storage, and the package should be neatly and beautifully. Price of strapping machine: The price of automatic strapping machine or the quotation of automatic strapping machine is more than twice that of semi-automatic equipment.

Horizontal automatic baler series products all achieve continuous and reliable bundling, the plastic tape adheres to the surface of the package, the joint is firm, the electrical safety of the machine, and the work noise and smoke do not affect the health of the operator.

Fully automatic baler and semi-automatic Baler distinction
Fully automatic packing machine, without manual insertion, the trigger mode is divided into jog, manual, continuous hit, ball switch, foot switch, photoelectric sensor switch, just press the switch to automatically complete the packaging, convenient and fast, suitable for single machine mass production Production, such as with automatic conveyor belt, can realize unmanned automatic packing, which greatly saves manpower and reduces costs.
In the case of a semi-automatic strapping machine, it is necessary to insert the tape manually. After inserting the strapping tape, the machine will automatically complete the process of gathering, bonding, cutting, and ejecting the tape. Because each product requires manual operation, it is not suitable for mass production, but the semi-automatic model is small, cheap, easy to operate, and does not have high requirements for packaging straps. It can be adapted to packaging straps of various materials. market.

2020-05-25

Today I will share with you the precautions for the use of waste carton Baling Machines.

1. The waste paper box baler should be fixed during installation. Due to the fast speed of the machine during operation, uneven ground may cause the machine to vibrate, causing safety hazards for operators. Therefore, you must keep the ground level and install the machine according to the instructions to keep the machine stable.

2. Ground the power supply of the machine correctly to avoid shock caused by improper operation. There must be an automatic power-off device, which can automatically shut down the machine when power problems occur to avoid shocks and other conditions.

3. The operator of the waste paper box baler should do protective work, such as wearing gloves, and prohibit the head and hands from entering the machine. Non-machine operators should try to keep a distance from the machine as much as possible to prevent damage caused by material splashing.
4. Before use, please check the baler and run it for a while. After use, please turn off the switch gradually.
5. The protective cover of the waste paper box packing machine shall not be disassembled: during the operation of the machine, the protective cover shall not be disassembled. Non-operating personnel or technical personnel shall not remove the protective cover of the hydraulic baler at will. When the machine is running, it is forbidden to touch the moving parts of the machine with your hands.
6. Waste carton Baling Machines often use packaging cartons, etc., so it takes a long time to block. Sometimes it can cause the machine to operate poorly, which can damage the machine and shorten its life. The machine should be cleaned regularly and lubricated parts should be lubricated regularly.

7. The waste paper box baler is an indispensable part of the modern packaging industry. Knowing how to use it correctly is very useful for our daily work!

Shaanxi Nick machinery equipment can supply many kinds of baler machine 
Waste paper baler machine ,plastic baling machine ,metal press ,sawdust bagging machine ,rice husk baler machine ,rag bagging machine ,tire baler machine ,used cloth baling machine ,and many kind of strapping machine ,compactor ,baling press machine as so on . 
For more information ,please visit : www.nickbaler.net or www.nkbaler.com 
even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-25

Reasons for hydraulic oil heating of hydraulic straw baler:
1. Insufficient component accuracy and poor assembly quality, large mechanical friction loss between relative movements, unreasonable design structure of hydraulic components in the system, and poor manufacturing quality. After the oil passes through the valve, the pressure loss is large and the internal leakage is serious.
2. The quantitative pump oil supply system that selects the capacity of the oil pump according to the fast forward speed. During operation, most of the excess flow will overflow from the overflow valve under high pressure and become heated. The selection of hydraulic components in the hydraulic system is unreasonable. When the valve is selected, due to too small specifications, the energy loss is too large and the system heats up, or the internal tassel is too high and causes noise. When the pump is used, the flow of the pump is too large, then excess oil will overflow from the overflow valve and cause heat.
3. The unloading circuit in the system is faulty or because the unloading circuit is not installed, the oil pump cannot be unloaded when the work is stopped. All the flow of the pump overflows under high pressure, causing overflow loss and heating, resulting in oil heating.
4. The system pipeline is too thin and too long, too much bending, local pressure loss and large pressure loss along the way, there are extra hydraulic circuits or extra hydraulic components in the hydraulic system.
5. The volume of the oil tank is too small, the heat dissipation area is not enough, no oil cooling device is installed, or the capacity is too small although there is a cooling device.
6. The clearance of the matching parts is too small, or the wear will cause the clearance to be too large, and the internal and external leakage will be large, resulting in a large volume loss, such as a reduction in the volumetric efficiency of the pump and rapid heat generation.
7. The working pressure of the hydraulic system is adjusted higher than the actual needs. Sometimes it is necessary to increase the pressure to work because the seal is too tight, or because the seal is damaged and the leakage increases.

8. The viscosity of the selected oil is improper, the viscosity is large, the viscosity resistance is large, and the viscosity is too small, the leakage increases, both cases can cause the oil to heat up.

2020-05-21

As time slipped inadvertently through our fingers, our lives also changed dramatically. We all have a better pursuit of the quality of life, and we also have a new experience for every element of life. In today's social development, there is a market when there is demand, and there must be competition in the market. Competition is not only a good assistant to promote the development of enterprises, but also a key role to promote market standardization. In today's market competition, if you want to make your products stand out in the industry, product production equipment is very critical.

    Nowadays, for the production industry, the application of packaging machinery and equipment has been very common. Especially the reference to packaging machinery has already covered every corner of the industry. For the enterprise, the baler is the "gatekeeper" of the production industry, the guardian of the transportation safety and overall quality safety of every commodity. The packaging machine is a follow-up production packaging equipment, which is to pack the packaged goods in order to strengthen the safety of the product during transportation and ensure that the goods can smoothly enter the market for consumers to choose.

    With the continuous development and progress of technology, there are more and more types of baler in the market, and the capabilities and craftsmanship of baler are also more exquisite. Led by technology, the baler continues to move towards an automated production model and an intelligent operating system to help the development of the production industry. However, more and more types of baler have brought convenience to production, but also brought certain obstacles, that is, the choice of baler has caused some problems for the enterprise. Therefore, in order to choose a packer suitable for its own production, it is necessary to consider the use of the packer from a comprehensive perspective, so as to effectively help the enterprise to achieve rapid development
For more information ,please visit : www.nickbaler.net or www.nkbaler.com 
even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time .

2020-05-20

The packaging of commodities is inseparable from all kinds of packaging machinery. With the continuous advancement of the times, consumers have higher and higher requirements on the packaging of commodities, which has stimulated the continuous progress of various packaging machinery industries. It has a very important position in the industry and has played a decisive role. In the pharmaceutical industry, the baler is an indispensable device.

      The development of packaging machinery market will present the following two points: First, the technical content of packaging machinery is increasing. Some of the existing packaging machinery products in China are not high in technology, and foreign countries have applied many advanced technologies to packaging machinery, such as remote control technology (including monitoring), stepper motor technology, automatic flexible compensation technology, laser cutting technology, Information processing technology, etc.

    The packaging machinery market is increasingly monopolized. At present, except for the steel belt baler, pneumatic baler and some small automatic baler and semi-automatic baler, there are certain scales and advantages in other packaging machines in China, which are hardly a system and scale, especially some complete packaging production lines with high demand in the market In the world packaging market, they are monopolized by several major packaging machinery enterprises (groups). Specialized in the production of packaging machinery parts.

      The appearance of the baler makes the internal structure of the baler more simplified, and the volume is more compact, so that the use of the baler is more extensive. The packaging machine provides advanced technical equipment for the packaging industry to ensure the high efficiency, high quality, high environmental protection, multiple varieties and low cost of the packaging products, which has brought huge economic benefits to the society. It is expected that the future baler will have a bigger breakthrough in volume and shape, and will be more suitable for future development needs.

2020-05-20