System innovation:
The hydraulic system of the Nick NKW series horizontal plastic bottle balers and automatic horizontal plastic bottle balers have both reliability and stability. The reason lies in the rationality and seals of the hydraulic system of the Nick Machinery horizontal hydraulic balers. The superiority of selection; due to the reasonable design of the seal structure in the design, the selection of seals is extremely standardized, and the compatibility of hydraulic oil and sealing materials in the operation of the machine, load conditions, ultimate pressure, working speed, environmental temperature changes, etc. A closed state, so the equipment operation of Nick Machinery NKW series horizontal hydraulic baler and horizontal rear-blocking door baler is always in a stable state.
Features:
1. Upgrading equipment materials, using larger steel plates than similar equipment, with better durability;
2. Flexible bag delivery method, horizontal hydraulic baler with back-blocking door and horizontal baler with push bag are available;
3. Suitable for different environments, according to customer requirements, it can be equipped with low energy consumption and low noise oil pumps, which will not disturb the people;
4. Imported hydraulic parts and sealing elements from Europe and the United States have a longer service life and are not afraid of oil leakage after long-term use;
5. Individually customized pressure cylinder, thicker cylinder, longer stroke, greater compression force, and better compression effect;

Nick Machinery continues to innovate and improve to make the horizontal Baler perform better and make the equipment better serve users. Users are welcome to visit and purchase.

2021-05-26

The hydraulic baler is suitable for straw, forage, waste paper baling, cotton baling, clothing baling, straw baling, plastic baling, wool baling, recyclable garbage baling, and can also be used for cotton, wool, waste paper boxes, waste cardboard , Yarn, tobacco, plastic, cloth, woven bags, knitted velvet, hemp, sack, tops, hair balls, cocoons, silk, hops, waste plastic bags and other soft materials such as light foam and loose materials are compressed and packaged. It is compact, neat and beautiful, and can greatly reduce transportation costs. It is a good production tool for cotton producing areas, textile enterprises, garment factories, waste material recycling stations and other various light industrial enterprises.
The quality is reliable and safe; it is widely used, stylish in appearance, and exquisite workmanship; four strapping slots, easy to operate, three breadboards, single-sided feeding, effectively avoiding wrong operation and damage; it can be equipped with anti-rebound The barb is equipped with a safety switch and an open safety interlock mechanism.
The electrical control system adopts advanced electrical control components, which are easy to operate, durable, and can be used without debugging. Manual bundling, automatic turning over, rigid pressure plate structure, convenient for recycling a variety of waste materials, fast compaction, low noise, high efficiency, When working on non-pressure stroke, the pressure plate automatically returns to the position without load to avoid high oil pressure to reduce power.

For more detailed description of wool baler, you can go to the website of Nick Machinery www.nkbaler.net, or call our sales phone: 86-29-86031588

2021-05-25

Instructions for use:
1. Prepare the Bailer room and wrapping cloth
2. Open the small doors on the left and right sides and the front and rear doors, spread the wrapping cloth on the bottom row, then close the door and the small door, move the small door support rods on both sides (pull the switch handle out of the hydraulic door operation), the top is small Gate.
3. Like the feeding in the box, it should be uniform and flat, not high on one side and low on the other, otherwise it will cause the pressure and discharge piston rod to tilt and bend and deform.
4. After the material box is filled, operate (pull outward) to step on the handle to lower the upper pressure row. When it drops to the yellow mark line, push the step on the handle to make the upper pressure row rise and stop when it reaches the yellow mark line.
5. Feed the material into the box again-press down-rise, repeat this several times, until the material reaches a certain weight, push the handle inward to make the upper press bar rise to the yellow mark line to stop.
6. Install the wrapping cloth on the upper pressure row, and then manipulate (pull out) the booster handle to make the stepping on the bag and the pressure cylinder simultaneously press down the pressure cylinder at the same time, and stop when the yellow marking line is overwhelmed.
7. Manipulate (push in) and press the handle to make the press bar rise to the yellow mark line to stop, and then push out the package to complete a packaging operation process.

The above is the use method of plastic film baler shared by Nick Machinery. Is it helpful to everyone? For more baler content, please pay attention to www.nkbaler.net

2021-05-25

There are different ways of discharging, such as turning the bag, pushing the bag (side pushing and forward pushing) or manually taking the bag (Bailer); all models are hydraulically driven, and manual or PLC automatic control operation can be selected;
1 No foot screws are required for installation, and diesel engines can be used as power in places where there is no power supply;
2 The size of the compression chamber and the size of the block can be customized according to customer requirements.
3 The pusher cylinder and the pusher head are connected by a spherical structure, which has good reliability and long service life of the oil seal.
4 Low noise hydraulic circuit design, high efficiency and low failure.
5 Easy to install, no foundation required.
6 button operation, PLC control, safe and reliable.

Nick Machinery can tailor the packaging machine according to your packaging requirements, space size, and budget constraints. You can contact us for more information in order to recommend the best packaging solution for you. You are welcome to consult www.nkbaler.net

2021-05-25

The waste plastic hydraulic baler is mainly suitable for the packaging of loose materials, such as waste plastic, cardboard boxes, straw, wheat straw, straw, beverage bottles, etc.
Features
1. Hydraulic configuration: The hydraulic circuit system with fast and low noise of regenerated oil adopts the combination of imported and domestic high-quality components, which not only guarantees the quality but also reduces the cost, and the performance of the whole machine is stable.
2. Electrical configuration: PLC control is selected to make the circuit simple, the failure rate is low, and the inspection and troubleshooting are simple and quick.
3. Conveyor: Conveyor belt adopts new PVC material, which is anti-corrosion and aging resistance, has the advantages of slip resistance, large conveying capacity and strong load capacity.
4. The length can be set freely, and the Bailer value can be accurately recorded.
5. Easy installation, simple foundation construction, no need for foundation reinforcement.

Nick Machinery's waste plastic baler has simple structure, easy installation, high degree of full automation, low failure rate, new and old users are welcome to come and buy www.nkbaler.net

2021-05-25