1. The pressure value of the pressure reducing valve is set too low (that is, lower than the recommended safe working pressure value in the user manual): slowly adjust the overflow valve when the material is pressed, increase it clockwise and decrease it counterclockwise. Check the pressure while adjusting to the recommended value, and then tighten the adjusting handle with the lock nut. If the pressure cannot be adjusted, you can remove the overflow valve core to clean or replace the entire overflow valve.
2. Abnormal sound of the oil pump: Check the oil volume in the oil tank. If the oil level is low, please add the same type of hydraulic oil to the optimal level line in time. Check whether the suction pipe is leaking, and check whether the suction pipe is tightened.
3. The filter is clogged: check whether the suction filter is clogged. If it becomes clogged, a new filter needs to be replaced.
4. The oil pump may be damaged: check the oil pump and replace it with a new one if necessary.
5. Damaged oil cylinder sealing ring: remove the oil cylinder and replace the sealing ring
6. The piston rod is bent and the sealing is damaged: check the piston rod and replace it with a new one if it is damaged
7. Damaged pipe seals: check and replace O-rings

Here, Nick Machinery reminds you to use the peanut shell bagging Press machine in strict accordance with the operating instructions and do a good job of daily maintenance of the machine to make the bagging Press machine work better for you.

2021-06-28

Peanut shells are waste in the eyes of many people, but for certain food producers/manufacturers (even some small restaurants), peanut shells are not waste but a valuable commodity.
Peanut shells can be used as raw materials to make cosmetics, soaps, wallboards, glues, soil amendments, dyes, plastics, linoleum, packaging materials, feeds, building materials, etc. Therefore, those enterprises that produce a large amount of peanut shells will not incinerate tons of peanut shells (incineration not only causes waste of resources, but also pollutes the environment), but packs and sells peanut shells, turning waste into treasure.
Since peanut shells are relatively finely divided and occupy a relatively large area, how to efficiently transport them to downstream processing plants and reprocess them is a difficult problem. Nick Machinery specializes in manufacturing various hydraulic balers, which can effectively solve the transportation problem of peanut shells.
Our peanut shells can directly compress peanut shells into plastic bags or woven bags. After bagging Press, the mouth of the bag can be easily sealed with tape. The weight of the bale varies from 3kg to 40kg, and the size of the bale is from 400*300*100mm to 750*430*310mm, which can also be customized according to customer requirements. In addition to peanut shells, the bagging Press machine can also be used to pack other materials, such as wood shavings, wood chips, rice husks, cottonseed husks, and so on.
In addition to bagging Press machines, customers can also use Baler machines. The Baler machine can compress the material into compact briquettes without bagging Press operation. This model is easy to operate and generally requires only one operator, which greatly reduces labor costs.

For more details about the bagging Press machine, please contact us www.nkbaler.net. Our sales staff will recommend the baler that best meets your requirements according to your packaging needs.

2021-06-26

The hydraulic system of the automatic peanut shell balers is designed and manufactured in accordance with the design standards of large hydraulic balers. The structure is reasonable, firm, practical, and easy to maintain, which greatly improves production efficiency and reduces energy consumption and costs. The oil tank of the peanut shell packing machine has good sealing performance and heat dissipation performance. The hydraulic valve can provide a good heat dissipation function. The long-term working oil temperature is not high, and auxiliary electric heating can be purchased at low temperatures. It can work continuously at high temperature and low temperature.
The hydraulic fittings and electrical components used on the peanut shell packing machine are all regular-produced brand products with guaranteed quality to ensure the stable working performance of the equipment and low failure rate.
1. The machine adopts hydraulic power, horizontal and horizontal bagging, with fast bag delivery speed and high output.
2. The machine is simple to operate and easy to use. It is equipped with semi-automatic and fully automatic operation modes (convertible) at the same time, with high degree of automation, less labor, manual feeding or automatic feeding by conveyor.
3. This machine is mainly suitable for the compression of wood chips, peanut seedlings, corn cobs, rice husks, cotton seed husks, sawdust, peanut husks and other scraps. After compression, it is directly bagged for storage and reduces transportation costs.

The peanut shell packing machine produced by Nick Machinery has always had its own uniqueness, because we believe that we can only make our products more refined and distinctive. Only by making users and friends more satisfied can we have a better market.

2021-06-26

1. The packing speed is fast and the material is discharged continuously. It only takes 1 minute for each bag to complete the bagging.
2. Imported relays are used to control the circuit, which effectively prolongs the service life of the equipment;
3. The equipment adds the warp and weft lines to fix the box without welding.
4. The hydraulic baler has moderate operation height, simple and convenient operation, and more convenient, suitable for packing lighter items.
5. After improved design and careful manufacturing by a professional R&D center, the scope of use of hydraulic baler is continuously expanding, and straw, plastic, pulp, powder, and paper scraps can be baled.
It is mainly used for compressing and packing garlic skin, alfalfa, pasture, wheat straw, crop stalks, crushed corn stalks, and peanut seedlings. Can be used as corn stalks, pasture silage yellow storage micro-storage hay bales, wheat straw, sawdust, waste fungus sticks, broken bark, fiber cotton, dander, scraps, garbage, peanut seedlings, various straw scraps, corn cobs (whole It can be broken) or other floating materials, etc., packaged and bundled, and automatically bagged and packed. This model has high bundling efficiency and high density. It can greatly reduce the storage area, improve the transportation capacity, and reduce the possibility of fire. It is an indispensable and optimal equipment for animal husbandry, papermaking, cattle and sheep breeding, forage distribution, and straw power generation.

The NKB240 bagging machine produced by Nick Machinery is very suitable for forage baling and compression. It adopts PLC control system, simple operation and precise control. You are welcome to visit our website for detailed parameter descriptions www.nkbaler.net.

2021-06-24

Straw baler, also known as straw bagging machine, is a medium-sized fully automatic hydraulic baling equipment newly developed by our factory based on current market needs. The comprehensive utilization of straws and straws, the transportation and storage of straws for power generation, and green breeding have played a significant role, and are favored by the majority of users. The product is easy to move, easy to operate, high production efficiency, labor saving and cost reduction. It is an ideal straw silage and yellow storage baling machine. The new generation of silage baler is squeezed and packed by hydraulic principle. The baled silage can be stored for 2-3 years without deterioration. It is convenient to carry and feed (open a bag when you feed it). It is much more convenient than the previous silage, and it solves the problem. The phenomenon of waste of forage in silos.
Performance characteristics of straw baler:
(1) The feed opening is widened and enlarged, making the filling more convenient and quicker;
(2) No foot screws are required for installation. Diesel engines can be used as power where there is no power supply; wheels can be equipped to facilitate mobile operations;
(3) There are different ways of discharging materials, such as turning over, pushing or manually taking (packing) packages;
(4) There are ten grades of extrusion force from 10 tons to 100 tons for users to choose;
(5) The size and the size of the bale can be customized according to customer requirements;
(6) The pusher cylinder and the pusher head are connected by a spherical structure, which has good reliability and long service life of the oil seal;
(7) The equipment is hydraulically powered, which is easy to install and does not require foundation;
(8) Low noise hydraulic circuit design, high efficiency and low failure.

The above are the characteristics of the straw bagging machine introduced by Nick Machinery. If you want to know more about the detailed parameters of the straw bagging machine, please contact www.nkbaler.net

2021-06-24