Simple diagnosis technology is to rely on maintenance technicians to use simple diagnostic instruments and personal practical experience to diagnose the faults in the hydraulic system of the waste paper baler, identify the cause and location of the fault, and propose corresponding troubleshooting methods.

Simple diagnosis technology is a commonly used method, among which checking is the easiest one. Which aspects should be checked specifically? Listen to Nick Machinery’s explanation
1. Look at the actual working status of the hydraulic system.
2. Look at the pressure value and fluctuation phenomenon of each measuring point in the hydraulic system.
3. Check whether the oil is clean and deteriorated, whether there is foam on the surface, whether the oil volume and oil viscosity meet the requirements, etc.
4. See if there is any leakage.
5. See if there is vibration when the working parts are working.
6. Look at the product quality, judge the working status of the motion mechanism, the stability of the system working pressure and flow.
By looking at these places, you can determine what went wrong, and then prescribe the right medicine.
If you still can't solve it, please log on to the Nick Machinery website to leave a message, the company website: www.nkbaler.net, or call: 86-29-86031588.

2021-01-16

Nick brand automatic waste paper baler has simple structure, stable action, simple operation, low failure rate and easy cleaning and maintenance. It is a good helper for your production.

Nick Machinery specializes in the production and sales of horizontal waste paper balers, metal balers, straw balers, tire balers and other environmental protection equipment. The quality is trustworthy. Today I will discuss with you today that the price factors that restrict horizontal waste paper balers are Which ones?

1. The main steel, most companies use the same steel, there is not much difference.
2. Composition of hydraulic cylinders. The current hydraulic cylinder technology is relatively mature, but some small manufacturers still use some inferior products, and the product price difference is about 10,000 yuan. Conditional equipment now uses air-cooled hydraulic stations, which greatly reduces the high temperature phenomenon in the work of the waste paper baler.
3. Automatic threading rack. According to the different market prices, the market price is about 30,000 to 50,000 yuan.
4. Electrical products, fully automatic computer control system, the price difference is about 10,000 yuan.

The price factors that affect the horizontal waste paper baler are probably the above points. I hope that it can provide some guidance to our customers when they investigate and purchase.

If you need a horizontal waste paper baler, please visit the Nick Machinery website www.nkbaler.net, there are product pictures and videos, please click to watch! Or call 86-29-86031588, if you don’t understand, someone will be responsible for the explanation.

2021-01-16

The maintenance of waste paper baler is very important, and it has a lot to do with the service life. How to maintain the oil filter of the baler? Give everyone a few tips:
1. It has sufficient oil flow capacity and low pressure loss;
2. The filtration accuracy should meet the design requirements;

3. The filter element has sufficient strength;

4. The filter element has good corrosion resistance and can work for a long time at the specified temperature;
5. It is convenient to replace, clean and maintain the filter element.
The oil filter in the hydraulic system of the waste paper baler can filter out impurities mixed in from the outside; at the same time, the solid impurities generated by the hydraulic system of the baler during the working process can also be filtered through the oil filter. This can ensure the plot of the hydraulic oil, prolong the service life of the hydraulic system of the baler, and ensure the normal operation of the baler.
If you are interested in the above waste paper baler or have questions, please log on to our company's website: www.nkbaler.com, or call: 86-29-86031588

2021-01-16

The hydraulic oil pump is the main power source of the waste paper baler. The following problems may occur during the working process. Below we briefly introduce the easy failures and the solutions.

The hydraulic oil pump pressure of the waste paper baler is low and the plunger rises for a long time. The problem may be that the overflow pressure is not adjusted well, or the oil return valve leaks. Adjust the overflow pressure and clean the oil return valve according to the prescribed method. Or replace the spool.

The current of the hydraulic oil pump motor is too large, causing the main pump motor to work abnormally. Generally, the pressure of the overflow valve is not adjusted properly, the oil density is too thick or there are impurities, and the oil pipe may enter the air. It is necessary to adjust the oil supply pressure, replace the oil and tighten the bolts of the oil inlet pipe to ensure airtightness.

The stable operation of waste paper baler equipment is inseparable from our daily maintenance and repair. Only long-term stable work can bring us more benefits. Therefore, the maintenance work is an important part of daily work and requires our attention.

For more information about the repair methods of waste paper baler, please log on the website of Nick Machinery www.nkbaler.net, Tel: 86-29-86031588, best-selling models: NKW160Q, NKW200Q, and support custom-made various models of baler, you are welcome arrival.

2021-01-16

The waste paper baler is widely used in various waste paper factories, old waste recycling companies and other units and enterprises. It is suitable for the packaging and recycling of old waste paper, plastic straw, etc. It improves labor efficiency, reduces labor intensity, saves manpower, and reduces transportation costs. Good equipment.
In general, what is the marketing strategy of waste paper baler?
1. It is necessary to have sufficient analysis capabilities, including the sales data of past small waste paper balers and other products. It is necessary to analyze the market development and change trends in a timely manner, and then formulate a complete production and sales plan, that is to say, follow the market Step forward.

2. Communicate more with users. As a real user, you can often provide manufacturers with more useful suggestions, such as the latest production requirements, suggestions on the improvement of small waste paper baler equipment, etc., only combining the suggestions of most users In order to better produce high-quality products, so as to create favorable conditions for sales.

Shaanxi Nick Machinery Equipment Co., Ltd. is committed to the production of waste paper balers. The waste paper balers and automatic waste paper balers produced are of high quality and low price. If you need them, please log on to our website: www.nkbaler.com , Or call: 86-29-86031588, welcome to call for more details!

2021-01-16