The aluminum alloy Block Press machine can squeeze a variety of relatively large metal scraps, scrap steel, scrap iron, scrap copper, scrap aluminum, disintegrated car shells, waste oil barrels, etc. into various shapes such as cuboid, cylinder, octagon, etc. Charge. In order to facilitate storage, transportation and return to the furnace for reuse. After being pressed into a block, the loss is extremely low when it is put into the furnace and recovered. The whole production process does not require heating, adding additives or other processes, and is directly cold-pressed to form. The forming also ensures that the original raw materials remain unchanged. For example, cast iron scraps are used instead of cast iron after being formed. For castings of special raw materials, it means more to take back.
 Features of aluminum alloy Block Press machine:
a. Hydraulic drive, stable and noise-free work, fast squeezing speed, large squeezing force, compact lumps, not easy to scatter.
b. Using high-quality national standard steel plate and advanced welding technology, the mechanical parts are sturdy and durable, the failure rate is low, and the service life is long.
c. A cooling system can be installed to increase the continuous working capacity of the equipment and reduce the failure rate. The cooling system can be divided into water cooling and air cooling.
d. The oil cylinder seal adopts high-quality Glyy ring, which has good sealing performance and strong pressure resistance.
e. Easy installation, small floor space, no foundation, footing, etc. The operation is simple and can be divided into manual and automatic modes.
f. Cold extrusion will not change the metal material and increase the utilization rate.
g. High safety factor, safer than traditional hammer packing and mechanical packing.

Due to its significant advantages, the aluminum alloy Block Press machine produced by Nick Machinery has been widely used in metal recycling, scrap car dismantling, metal casting and smelting, metal products, machining and other industries. Welcome to buy 86-29-86031588

2021-05-10

The car shell baler is suitable for steel mills, recycling and processing industries, and non-ferrous and ferrous metal smelting industries. Various metal scraps, steel shavings, scrap steel, scrap aluminum, scrap copper, etc. can be extruded into rectangular, cylindrical, octagonal, and other shapes of qualified charge to reduce transportation and torch costs.
Baling Press is an energy-saving, environmentally friendly, low-carbon Baling Press, used to compress the car shells of end-of-life automobiles, facilitate transportation and increase the furnace rate. Equipped with a hydraulic grab, it is more convenient to place scrapped cars. The whole machine is equipped with high-quality motor, PLC intelligent control system, hydraulic system, and the selection of high-quality components ensures the safety of quality and control.
The waste car shell baler equipment is mainly composed of the following components:
1. Compression chamber 2. Compression door system 3. Motor and electrical system 4. Hydraulic grab 5. Frame 6. Optional diesel engine drive 7. Push cylinder 8. Can be equipped with diesel generator drive, suitable for no electricity supply environment
Features:
(1) All models of waste car balers are hydraulically driven. You can choose manual or PLC automatic control operation.
(2) No foot screws are required for installation, and diesel engines can be used as power in places without power.
(3) There are three ways to unpack the package, including flipping the package and pushing the package.
(4) There are eight grades of extrusion force from dozens of tons to hundreds of tons, and the production efficiency ranges from 0.5 tons/hour to 20 tons/hour.
(5) The size of the feeding box and the shape and size of the block can be designed and customized according to the user's raw material specifications.

In order to achieve the weight of the bale required by the customer, you can contact the sales team of Nick Machinery to design and customize the reasonable machine pressure and cavity size according to your material characteristics. 86-29-86031588.

2021-05-10

The sawdust Block Press machine is used by the feeder (belt conveyor) or manually to evenly send the material to the upper part of the forming machine, and then press to form it. The sawdust Block Press machine has high degree of automation, high output, low price, low power consumption, simple operation and convenient movement. If there is no electric equipment, it can be replaced by diesel engine. The sawdust Block Press machine has strong material adaptability: it is suitable for the molding of various biomass raw materials. The straw can be processed and shaped from powder to 60mm in length and with a moisture content of 5-20%. Sawdust Block Press electromechanical heating function: the sawdust Block Press machine is fully automatic electric heating device, the sawdust Block Press machine can adjust the dry humidity of the material, and the sawdust Block Press machine can solve the problem of material blockage and non-forming. Automatic adjustment of the pressure wheel of the sawdust Block Press machine: Using the principle of two-way rotation of the thrust bearing to automatically adjust the pressure angle, so that the material is not crowded, and the machine is not stuffy, and the stability of the discharge and molding is ensured. The sawdust Block Press machine is simple to operate and easy to use: it has a high degree of automation and requires only 3 people. It can be fed manually or automatically by a conveyor. The sawdust Block Press machine has a long service life: the mold is made of special steel and special wear-resistant materials. The sawdust Block Press machine has high performance and cost-effectiveness. On the basis of similar equipment, the technology content and functions of the machine are improved. The price has fully taken into account the carrying capacity of a large number of users, especially the cost of processing by farmers.

The sawdust Block Press machine produced by Nick Machinery has a high degree of automation, high output, low power consumption, simple operation and reasonable price. It is a good helper for your production. For more information, please pay attention to www.nkbaler.net

2021-05-10

Tires (such as car tires, truck tires, etc.) are ring-shaped elastic rubber products that are assembled on various vehicles or machinery and are grounded and rolled. Therefore, tires are a material with high resilience. The tire baler is a vertical heavy-duty double-cylinder baler specially used for compressing and packaging automobile tires, truck tires and other products. In terms of design, the tire baler fully considers the high resilience of the tire after compression, and especially strengthens the strength of the fuselage so as to offset the high resilience of the compressed tire.

The vertical design of the tire baler has a small footprint and is widely used in tire recycling centers. It is one of the necessary machines in the waste tire recycling industry. Using a tire Baling Press to compress tires can greatly save storage space and reduce transportation costs.

The tire bales compressed by the tire baler are widely used in the construction of sound insulation walls, urban greening facilities, lightweight roadbed fillers and other civil engineering.

Machine applications: car tires, truck tires, bicycle tires, motorcycle tires, etc.

If you need a high elastic material packing machine, you can choose our NKOT250 series tire packing machine, or you can contact us to customize your own tire packing machine plan.

2021-05-06

The plastic bottle packing machine produced by our company has obtained a number of technologies, which can be widely used in cotton, wool, plastic bottles, waste paper, waste paper boxes, waste cardboard, yarn, plastic, cloth, woven bags, knitted fleece, Packing of all light foam and loose materials such as hemp, sack, wool top, wool ball, cocoon, silk, hops, wheat wood, grass, waste plastic bags.

1. There are different ways of discharging, such as turning the bag, pushing the bag (side push and forward push) or manually taking the bag (packing);   

2. The installation does not require foot screws, and the diesel engine can be used as power in places without power;

3. There are ten grades of extrusion force from 63 tons to 400 tons for users to choose, and the production efficiency ranges from 4 tons/hour to 40 tons/hour;   

4. The size of the compression chamber and the size of the block can be customized according to customer requirements;   

5. Automatic strapping to improve the speed of packing;   

6. It can be used not only as a plastic packaging equipment, but also as a processing equipment with functions such as packaging and compaction of similar products;   

7. Hydraulic drive, plc control, with man-machine interface (touch screen) and inspection monitoring, synchronized action instructions, safe and reliable

Nick Machinery continues to innovate and improve on the original basis, making the application range of the Baling Press more extensive, one machine with multiple functions, and becoming a true multi-functional Baling Press, which greatly facilitates the majority of users.

2021-05-06