Horizontal baler is also a kind of baler, and it is also applied in many places. So the question is, what about horizontal baler? What kind of equipment is it? Today Nick will give you a brief introduction.
1. The baler equipment is mainly suitable for the packaging and recycling of various types of waste materials. The simple and efficient compression of the recycled materials is to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.
2. The horizontal balers are simple in structure, reliable in performance, and have good usability and maintenance effects. Environmental protection and no pollution during work. Easy to install, no need to debug. There are many models of different pressures and bin sizes to choose from. Large output, energy saving and emission reduction, in line with the national industrial policy of environmental protection and low carbon.
3. It should be noted that before starting the main motor, check whether each operating element is in the reset state. The motor should not be started frequently, and the continuous starting should not exceed three times. When the machine needs to be eliminated due to a malfunction, be sure to cut off the working power supply. There should be a time interval of no less than 2 minutes when the working power is cut off and the power is turned on again. Otherwise, the controller may work abnormally.
4. Do not put your hands or body close to the main machine. Do not use wet hands to plug in or out the power plug, as there is a risk of electric shock. Do not place the power cord in aisles such as forklifts, or avoid direct pressure on the power cord and other places. It is dangerous if the outer skin is damaged or disconnected.
In general, the horizontal baler is a very good equipment. Its use makes our life and work more convenient. I believe that with the development of technology, its functions will become more and more perfect.

Nick Machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other packaging equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you! 

2021-05-14

The comprehensive utilization of waste tires and rubber will help alleviate the shortage of rubber resources in my country. However, due to import restrictions and insufficient supply of scrap tires in my country, the scale of scrap tire utilization industry has been restricted. Nowadays, the industry that turns waste into treasure has become a hot topic. Many manufacturers have taken a fancy to the business opportunities and comprehensively reuse these waste rubber tires that no one cares about, and invest in rubber balers to pack the waste resources and reuse them in all walks of life. This project has always been advocated by the national government.
So how much contribution does the tire baler make to the environmental protection of the utilization value of waste tire rubber? The first is to solve the problem of disposal of waste tires and rubber; the second is to solve the environmental protection and recycling, the tires compressed by the tire Baler have a small footprint, which is easy to transport and reduce transportation costs; the third is to allow the machinery industry to continue to develop new tire packaging In the process of use, the work efficiency is higher and the cost is getting less and less. It can be seen that the importance of the Nick tire baler in the industry that turns waste into treasure is worthy of the attention of investors.

The tire baler produced by Nick Machinery provides equipment guarantee for the recycling of waste tires. For more information, please refer to Nick Machinery's website www.nkbaler.net

2021-05-13

In the modern age of the Internet, there are many manufacturers doing business on the Internet. Of course, there are also many leather bag companies, and none of them have formal manufacturers. How to judge a leather bag company needs to know the following points:
1. Learn through the Internet. While searching for tire Balers and other related equipment, check whether its website is a specialized manufacturer. The specialized manufacturer’s website only offers this series of products. The leather bag company’s website has a wide variety of products that dazzle people. It's like a grocery store, what you want.
2. In addition, enter the contact information in the Baidu column to see if the information is complete. Secondly, call to understand his professionalism of the tire Baler. If you are unfamiliar with this product or if the call is forwarded, you need to hang up and continue searching. Professional manufacturer.
3. Because most users ask for the price first, they all want to buy the price that is suitable, often so many users are greedy for cheap and suffer a loss, since ancient times, buyers have not been good sellers. To find a professional manufacturer of hydraulic baler, it is essential to inspect the manufacturer. Under the same conditions, priority will be given to professional manufacturers. Professional manufacturers have excellent equipment and the quality of the machine can be guaranteed.

The recycling of waste tires and rubber is inseparable from the tire baler. The Nick tire baler has simple structure, convenient operation and strong stability. It is an indispensable equipment in the waste tire recycling industry. New and old customers are welcome to come and buy 86-29- 86031588 

2021-05-13

The straw Block Press machine can compress corn stalks, straws, peanut skins, bean stalks, flower wood and other combustible crop waste stalks. The wasteful burning of these crop stalks is avoided, the environment is well protected, and renewable energy sources are effectively developed. The machine has reliable performance, simple and convenient operation. The equipment produces a wide range of raw materials, which can be adapted to burnable crop waste stalks such as corn stalks, straws, peanut skins, bean stalks, and flowers.
Product features, uses and application scope of straw Block Press machine:
1. This product has the characteristics of reasonable design, reliable manufacturing quality, simple structure, convenient operation, small size, less land occupation, labor saving and electricity saving.
2. The designed fully automatic control electric heating device can randomly adjust the dry humidity of the material to ensure the stability of the discharge molding and improve the work efficiency.
3. The main parts of this product are made of wear-resistant materials and have been specially treated, so they can be continuously pressed for production and are durable.
4. It is suitable especially for various biomass raw materials (corn straw, wheat straw, cotton stalk, straw, rice husk, peanut shell, corn cob, branches, leaves, sawdust and other agricultural products as raw materials or wood factories. Material) compression molding.

Nick Machinery provides: straw baler, straw Block Press machine and other packaging equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you! 

2021-05-13

Scrap metal balers are mainly used in recycling and processing industries and metal smelting industries. Various metal scraps, steel shavings, scrap steel, scrap iron, scrap copper, scrap aluminum, aluminum shavings, disassembled car shells, waste oil barrels and other metal raw materials can be squeezed into rectangular, cylindrical and other qualified furnace materials in various shapes . It is convenient for storage, transportation and recycling.
Shaanxi Nick Machinery Co., Ltd. direct sales products: scrap metal baler, scrap metal shearing machine, scrap metal vertical baler, scrap aluminum baler, absolute factory direct sales, not exaggerated. Metal balers have diversified specifications and favorable prices.
The main advantages of scrap metal baler are as follows:
It has a large material box, the internal width of the material box is 0.9 meters, the front and rear length is 1.5 meters, the depth is 0.6 meters, 0.9*1.5*0.6 meters, and the packing block specification is 300*300*550-700 mm, and the rear push cylinder squeezes forward. Packing, the maximum pressure is 400 tons, the packing and Block Press speed is fast, the front-turning packs out, the double-sided scissors, the operation is simple and convenient, considering the customer's long-term high-efficiency operation, equipped with a large oil tank and an air-cooled radiator to ensure long-term hydraulic oil If the temperature is not too high, the equipment can operate normally. The investment is small, the efficiency is high, and it is favored by the majority of users.
Characteristics of scrap metal baler
1. The way of package delivery: turn the package forward to make a block.
2. Wear-resistant plates are provided in the material box, which is more durable.
3. The upper gland is equipped with a lock, and the block forming effect is better.
4. With power distribution box, using energy-saving pure copper wire motor, which greatly saves electricity costs for users.
5. The operating valve adopts an advanced large-flow integrated block valve body, which has a good pressure-holding effect.
6. Hydraulic drive, select manual or PLC automatic control system
7. No foot screws are required for installation, and diesel engines can be used as power in places without power.

The scrap metal baler produced by Nick Machinery has a simple structure and is hydraulically driven, which improves production efficiency and reduces manpower input. The price is reasonable. Welcome to buy. 86-29-86031588

2021-05-12