1. When choosing lubricating oil, you should mainly pay attention to the corn stalk hydraulic baler equipment indicating which type of lubricating oil is required to be purchased in the book. According to your own specific situation, temperature and temperature conditions, choose the most suitable lubricating oil for your equipment. , We must first investigate the anti-rust function of lubricating oil. The oil in the rolling bearing must have anti-rust function. The anti-rust agent does not dissolve water, and the lubricating oil has about the adhesion, and it forms a layer of protection on the surface of the stainless steel plate. Film to reduce friction.

2. In the production and operation of the corn stalk hydraulic baler, the actual operating staff must be skilled in safe operation procedures, and they must also understand the daily maintenance of the equipment, the sanitary removal before the equipment is turned on and off, proper actual operation and proper maintenance The method can increase the output of the rice straw baler and reduce the cost.

Nick Machinery reminds you that in the process of using the straw baler, you must strictly follow the product instructions and do not ignore some small details to ensure safe and effective production. If you have other questions, you can go to the Nick website to learn www.nkbaler.net

2021-05-18

1. It is forbidden to wear gloves to carry out actual operations on rotating machinery and equipment.

2. In the actual operation of the gear transmission part, the clothing must be "three tight", that is, the jacket, sleeves, and trouser corners should be fastened firmly.

3. When the mechanical equipment of the corn stalk hydraulic baler is in operation, it is not allowed to touch the rotating parts with hands or all parts of the body, not to extend the body into the part of the transmission system to pick up items, and it is not allowed to surpass on the transmission system without safety devices. Accurately measure the working specifications when the machinery and equipment are in operation.

4. When the corn stalk hydraulic baler carries out maintenance, cleaning machinery, or dismantling and replacing the rotating part of the CNC blade, etc., be sure to disconnect the switching power supply, and hang a safety sign "Some people are working, it is strictly forbidden to reclose" on the electrical switch. At the end of the work, the license plate must be removed immediately before driving; and the person who obtains the license plate must be the listed person. (The listing person must be the key operator and the last one left on the spot and checked for accuracy before the card can be used)

Nick Machinery reminds you that you must follow strict operating instructions during the use of the product, which can not only protect the safety of the operator, but also reduce the loss of equipment and extend the service life of the equipment.

2021-05-18

The new generation of silage baler squeezes and bales through the hydraulic principle, with a fully automatic control system and simple operation. Packed silage can be stored for 2-3 years without deterioration, it is convenient to carry and feed (open a bag after feeding) is much more convenient than the previous silage, and it solves the phenomenon of waste of forage in the silage. So what are his advantages, let's talk about it below:
Product advantages
1. No more digging silos
2. Long preservation time (natural preservation for up to 3 years)
3. Low packaging cost
4. Labor saving (a full set of equipment only needs 2-3 people to work)
5. Space saving and convenient transportation of feed
6. Worry-free, simple equipment operation (automatic control)
7. Various special-shaped machines can be customized according to customer requirements
8. Automatic control cabinet, one key to start packing
9. Bagging and packaging, out of the package

The silage baler produced by Nick Machinery has simple structure, convenient operation and maintenance, and moderate price. It is a good helper for your production.

2021-05-18

It is a very responsible physical process from the deformation of the steel plate to the completion of the shearing, which depends on the interaction of the forces. In the detailed analysis of the shearing process of the shearing machine, a problem arises: the size of the unit shear resistance will directly affect the shearing quality. So what issues will affect the unit shear resistance?
1. Metal properties: When steel plates are produced, materials with different strengths will be produced according to different element ratios. The higher the strength of the material, the greater its shear resistance and the lower its plasticity. It is very inconvenient to cut, the quality is also very bad, and it will also cause damage to the cutting edge. So pay more attention to cutting materials.
2. Shearing temperature: The steel plate will be heated at high temperature during the shearing process. The function is to facilitate the steel plate to be better sheared. At this time, if the temperature is higher, the unit shear resistance will be smaller, and the shear blade will go deep into the section. The higher the temperature, the higher or lower the temperature plays a very important role.
3. Deformation speed: The early stage of the steel plate shearing process is the press-in deformation stage. At this time, it depends on the steel plate deformation speed and the shearing blade cutting speed. At this time, it is not only related to the material material but also related to the temperature of the shearing machine. . Of course, if it is cold cut, this effect will not exist.
4. Lateral clearance of shear blade: With the continuous movement of the steel plate, the steel plate will be rotated and displaced. At this time, in order to ensure the cutting quality, it is necessary to apply pressure to the steel plate on both sides of the shear blade. The distance between the two sides directly affects the force of the steel plate. If the distance is too large or too small, the force of the steel plate will be unbalanced and the rotation displacement will change, which will result in a great reduction in the quality of shearing.
5. Shearing blade radius: Everyone knows that under the same force, the larger the area, the smaller the unit force will be. At this time, if the shearing blade radius is larger, the reaction force generated by the steel plate will be dispersed, resulting in a greater unit shear resistance. Therefore, the larger the blunt radius of the knife, the less "fast" the knife will be.

The above are the factors that affect the shearing quality of the shearing machine shared by Nick Machinery. For more information about the shearing machine, please consult 86-29-86031588

2021-05-17

The gantry shearing machine is mainly used for cutting steel plates, copper plates, nickel plates and other metal plates. Gantry shears are driven by hydraulic pressure. Compared with mechanical transmission shears, they have the characteristics of small size, light weight, low movement inertia, low noise, smooth movement, flexible operation and large cutting section. The gantry shearing machine has integrated hydraulic and electric control, can implement single and continuous action conversion, is simple and convenient to use, can stop and run at any working position, and is easy to achieve overload protection. It has a wide range of applications. It can be used as processing equipment for metal recycling and processing units, as well as furnace charge processing in factory foundries and metal cutting processing equipment in the mechanical construction industry.
So let’s take a look at the scope of application of gantry shears: gantry shears are suitable for metal recycling, processing plants, scrap car dismantling plants, renewable resource recycling industries, and various shapes of color steel tiles and bicycles. Shelves, motorcycle racks, scrap car iron sheets, hydraulic oil drums, refrigerator iron sheets, TV shells, angle steel, channel steel, metal, iron sheets, cast iron, thin iron, thin iron sheets, light and thin materials, steel, color steel tiles, scrap steel, scrap Iron, aluminum alloy, channel steel, angle steel, angle iron, copper plate, metal plate, aluminum profile, scrap steel bar, aluminum plate, iron plate, steel plate, round steel, scrap metal. The gantry shear is a kind of equipment suitable for the cutting of heavy scrap steel. Various metal structures such as small briquettes are used for cold shearing. The gantry shear has low inertia, low noise, stable operation, flexible operation, and shearing section. Great advantages.

Shaanxi Nick Machinery is a professional shearing machine manufacturer. Welcome to visit our company website www.nkbaler.net for consultation.

2021-05-17