Whether the horizontal waste paper balers can run normally, we need to start with the installation of the waste paper balers. If even the horizontal waste paper balers are not installed well, then nothing can talk about normal operation. The following is the automatic balers. Several aspects to pay attention to when installing:
1. Carry out the construction and installation of the project with reference to the roadbed drawing. If the roadbed and the engineering drawing are incorrect, adjustments should be made to prevent the normal operation of all machinery and equipment from being jeopardized after installation.
2. The viewing service platform and the feeding port must be tight and firm when installed. The welded joint must be smashed off the welding bump, polished and polished, and painted with anti-corrosion paint.
4. Use plastic tubing to bury the lead-in cable or build it at a high place to avoid high voltage and electric shock accidents, and often check the safety of the power circuit. If it is damaged and embrittlement, it must be replaced at any time.
5. Introduce 46# hydraulic oil (added to 80-90% of the tank volume), and often filter and replace gear oil according to regulations.

6. The waste paper packaging machinery installed indoors must pay attention to ventilation and heat dissipation, and the outdoor installation must pay attention to waterproof and rainproof.

NICKBALER horizontal waste paper baler has the advantages of time saving, convenient operation, labor saving, strong bearing capacity, cost saving, stability and reliability. https://www.nkbaler.net