At present, the baler should be used in many industries, such as the express delivery industry, the textile industry, the hardware industry and the chemical industry, which are currently necessary and popular. It is also loved by many users for its fast and convenient packaging method. At the same time, we will also produce products that meet the requirements of customers, but their related principles are still pointed out in common.
After understanding the principle of the baler, let's take a look at its maintenance. Any machine needs maintenance when in use.
1. The machine is always in a clean and dry state. Do not put any dirty or wet objects on the machine.

2. Avoid the power cord from being too long or being caught in the machine, and place it when it is not in use

NICKBALER has always insisted on being at the forefront of technological development, grasping the development direction of the hydraulic baler market, grasping market trends, and developing more advanced packaging equipment. www.nickbaler.net

2023-09-22

The scrap briquetting machine is fully automated and adopts hydraulic transmission, computer control, low failure rate, stable operation, and fast action. This machine uses foreign standard seals to ensure that the cylinder pressure is not weakened during continuous operation, easy to maintain, and durable. Hydraulic baler is mainly suitable for steel mills, recycling and processing industries, and non-ferrous and ferrous metal smelting industries. The hydraulic baler can squeeze all kinds of metal scraps into the qualified charge of various shapes such as cuboid, octagon, cylinder, etc., which can reduce the transportation and smelting cost and increase the furnace casting speed. The waste paper baler is used to squeeze waste paper and similar products under normal conditions, and pack them with special packaging tapes to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. The introduction of advanced technology and advanced technology of similar products at home and abroad. The iron chip briquetting machine has multiple functions and high performance. For different shapes and sizes, the high-precision iron chip briquetting machine can be used. This product can cold-press various steel particles, sponge iron, iron filings, tin filings, steel filings, copper filings, powdered granular iron powder, and smelting additives into high-density cylindrical cakes with a weight of more than 12 kg. The cake can be used directly in the furnace. Nick Mechanical quick cylinders are two quick cylinders, which are distributed on both sides of the main cylinder. The structure is simple and clear, which is convenient for the maintenance of the quick cylinder and the main cylinder in the future. There will be no situation where the pressure is inclined due to the inconsistency of the front and rear height of the material in the mold, which will damage the cylinder. The equipment's high flexibility, high intelligence and excellent cleaning effect.

A good production attitude is the foundation of a company's development. For an excellent company, products are the foundation and ideas are the key. www.nkbaler.net

2023-09-21

Sawdust balers are widely used in farms, breeding farms, ranches, horse farms, and packaging companies. Suitable for wood shavings, rice husks, sawdust, waste clothes, waste cotton, glass wool, soft waste and other materials. The sawdust balers are used to press sawdust and other materials into square blocks for use by wood mills.
The working principle of sawdust Baler machine:
It uses hydraulic cylinders to compress materials. When working, the rotation of the motor drives the oil pump to work, extracts the hydraulic oil in the oil tank, transports it through the hydraulic oil pipe, and transmits it to each hydraulic oil cylinder, driving the piston rod of the oil cylinder to move laterally to compress various materials in the tank. Then, through the squeezing of the side cylinder of the baler, the compressed bale is squeezed out from the discharge port.
Product advantages of sawdust balers:
1. Robust structure: Enpact always regards the strong structure of the equipment as a design element. Since it is a press, it needs to bear the pressure.
2. Safety guarantee: The sawdust Baler machine has multiple safety protection functions, making the operation safer and more convenient.
3. Intelligent control: Adopt intelligent one-key control, shorten the time of compressing materials, quickly reach the working state, and save money.
4. Configuration: The main power parts, hydraulic parts, and electrical parts of the sawdust Baler are all independent brands, which fully meet the European and American industry safety standards to ensure safe and stable operation.

5. Optional configuration: diesel engine drive, moving wheels.

NICKBALER sawdust balers reduce waste and save costs. It is a good helper for centralized processing and recycling of resources in modern society. www.nkbaler.net 

2023-09-20

If metal cutting chips cannot be handled properly, it will cause the following hazards:
1. The cutting oil consumption is large, and a large part of it is taken away by the metal cutting chips, which leads to waste
2. The cutting oil attached to the metal chips will drip and leak during storage and transportation, resulting in dirty, slippery ground (safety hazards) and environmental pollution
3. The content of cutting oil on metal chips will affect the quality and price of metal recycling

4. Since the reform and opening up, my country has vigorously developed heavy industry. A large amount of heavy metal ions are discharged into soil, lakes, rivers and other water bodies, and then into the ocean, seriously endangering human health and living environment.

After years of technical improvement of Nick Machinery, the baler produced by our company has absolute advantages in quality and efficiency at home and abroad. www.nickbaler.net

2023-09-19

With the increasing number of waste materials and the development of hydraulic technology, metal balers, metal shears, and metal chip briquetting machines are increasingly used in various material recycling processing points. Therefore, it is very important to ensure the normal operation of the hydraulic equipment system and increase the reliability of the work. The correct selection of the type and viscosity of the hydraulic oil is the first condition to ensure the long-term and reliable operation of the system.

On the other hand, when the hydraulic equipment system fails, it is also very important to be able to quickly find the cause and effectively solve it. The hydraulic equipment is composed of mechanical, hydraulic, electrical and instrumentation devices. Therefore, when analyzing the failure of the hydraulic equipment system, it is necessary to understand the transmission principle, structural characteristics, components and material configuration of the entire hydraulic system. Since the hydraulic equipment system is a sealed and pressurized system, the flow of oil in the pipeline, the movement of the internal parts of the hydraulic component and the damage of the seal are not easy to observe, so it is difficult to analyze the cause of the failure and judge the location of the failure. There are many reasons for the failure of hydraulic equipment systems such as metal balers, metal shears, and metal chip briquetting machines. Most of the reasons are: mechanical failure of the equipment---such as the unreasonable design of the hydraulic equipment system and the incorrect installation clearance. The quality problems of hydraulic components, improper selection of seals, and operating errors cause hydraulic system failures. This means that the hydraulic equipment system is caused by improper operation by the operator during normal operation, such as the wrong operation sequence or the wrong opening and closing of the valve, and normal operation When the power supply is suddenly interrupted, the temperature or pressure of the hydraulic oil is too high during work, no action is taken, the wrong oil is added when refueling, and the existing oil volume of the oil tank is too much or too little. In addition, the quality of the hydraulic oil causes the failure of the hydraulic equipment system. This is mostly caused by improper oil selection or the use of unqualified oil. It may also be caused by the hydraulic oil being used for a long time, and the new oil is not replaced in time.

The quality of each company's products is the life of the company, and Nick Machinery is no exception. The development of the company always puts quality and reputation in the first place. www.nkbaler.net

2023-09-18