The waste paper baler should pay attention to the following items when loading the test machine:

1, should pay attention to check the tight seals and pipe joints with or without leakage.
2. When the gauge pressure reaches a large working pressure, the pressure can be stopped.
3. During the pressure holding test, within 10 minutes after the motor is stopped, the pure pressure of the table should be greater than 1.96 MPa.
4. When the gauge pressure reaches the large operating pressure, the safety valve can be automatically opened and the pressure oil flows back to the fuel tank. During the test, the temperature of the fuel tank should not be higher than 65 °C. The unloading test of the NK1070T60 frame-pressed waste paper baler is based on the ability to eject the plastic bag without encountering difficulties. The above items can be produced after they meet the requirements.

2019-10-29

Waste paper baler 30T waste paper baler has unique toughness and sex, good shape, convenient operation, energy saving, and low cost of equipment infrastructure investment. It is widely used in various waste paper mills, old materials recycling companies and other unit companies. It is suitable for the packaging and recycling of used waste paper, molecular compound plastic straw, etc. It is labor efficiency, labor intensity, saving labor, and transportation expenses. Good equipment. Introduced advanced technology and advanced technology of similar products from home and abroad. Waste paper balers are mainly used to recover compressed cardboard, waste film, waste paper, multi-porous materials, beverage cans and industrial scraps, and various metal scraps and other packaging materials to guess waste. This waste paper baler saves space, saves up to 80% of the stacking space, transports money, and helps to protect the environment and recycle. 30T waste paper baler structure:

1. The waste paper baler is mainly composed of hydraulic cylinder, motor and fuel tank, pressure plate, box and base, upper door, lower door, door latch, packing belt bracket and iron branch.
2, the mainframe frame: high-quality thick steel plate gas-filled welding and casting close contact framework Advanced mechanical pre-fake makes the equipment not easy to use for a long time.
I want to improve the flexibility of the waste paper baler. Modern companies need more than just stand-alone equipment, more of a full set of production line equipment, and a waste paper baler that can be flexibly matched with various production lines is the best in the equipment. Extend the use of waste paper balers to save years of life and make the equipment easier to maintain. It is not easy to buy a waste paper baler. Whether it is from the company's production efficiency or the consumer's packaging requirements, you should choose a high-quality, cost-effective machine.
To expand the development of waste paper balers, we must upgrade their technology, let the waste paper balers work with us to create the future of wonderful beauty, and require strictness to allow ourselves to be more self-disciplined and treat the development and grasp every market. The development opportunities are tailor-made for companies that use waste paper balers, and strive to achieve user satisfaction and multi-faceted satisfaction.
The depreciated flow rate of the inlet and outlet throttling speed regulation is discharged through the overflow valve. Regardless of the load size, the pump must work under the pressure set by the overflow valve of the waste paper baler; the bypass throttling speed regulation is discarded. The flow rate is drained by a throttling or speed control valve. A safety valve is provided in the circuit, and the safety valve is only opened when the circuit pressure exceeds its set value, and the working pressure of the pump varies with the load. Other special properties of the inlet throttle throttle speed regulation, such as the speed regulation range and the smooth operation of the work, are better than the bypass throttle speed regulation.as more information ,please visit :www.nkbaler.com

2019-10-24

It is convenient for users to manage the silage bales after production and can be sold to all parts of the country. It can meet the needs of transportation by the distance and the silage space is no longer subject to harvest. Silage is the use of a silage baler to compress, bundle, wrap and then ferment the broken or smashed corn stalks.we called stalk balers or Silage baler , After being packaged, the silage straw feed is subjected to anaerobic fermentation of lactic acid bacteria under sealed conditions, which not only preserves the high nutritional value of the feed itself, but also increases the palatability of livestock such as cattle and sheep, and improves the digestibility of the feed. In such sealing conditions, silage can be stored for 2-3 years. The silage straw baler has the characteristics of simple operation and flexibility. Because many pastures and silage materials are planted too far away, especially in many areas in the south, where silage is lacking. The way to make silage has always been to use traditional storage methods. This traditional method is not only time-consuming and labor-intensive, but also requires special personnel to manage, and the uncertainty of the weather is also a huge impact on the quality of silage. The threat factor, and the process of using silage is cumbersome and laborious.

2019-10-17

The most direct influencing factors of the production efficiency of the Nick Machinery Plant waste paper baler: the packaged model specifications, the different models of different sizes, and the different specifications directly determine the production efficiency of the baler.
The production efficiency of the conventional waste paper baler is higher than that of the bale with the door. The efficient production of the horizontal waste paper baler is also inseparable from the performance of the baler cylinder. The performance of the cylinder determines the stability of the baler.
To ensure the high-efficiency production performance of the baler, we must choose the manufacturer of the baler with excellent craftsmanship.
The quality of the hydraulic oil selected by the baler, the quality of the hydraulic oil directly determines whether the cylinder can exert the maximum effect, and also directly affects the failure rate and service life of the cylinder.as more information ,please visit : www.nkbaler.com

2019-10-12

Applicable fields of gantry shearing machine: suitable for metal recycling processing plant, scrap car dismantling field, renewable resource material recycling industry, color steel tile, bicycle rack, motorcycle rack, scrap car iron, hydraulic oil drum for various shapes Various metal structures such as refrigerator iron, TV shell, angle steel, channel steel, and small compacts are cold-cut and processed into qualified furnace materials. The characteristics of the gantry shearing machine: 
1. The equipment adopts hydraulic transmission. Compared with the mechanical transmission shearing machine, it has small volume, light weight, small inertia, low noise, stable movement, convenient operation, flexibility and large shear cutting surface. The utility model has the advantages of convenient adjustment of the scissors mouth, safe operation and easy to realize overload protection.
 2. The device has manual, automatic and remote control functions. The operation control is convenient and simple. The scissors mouth starts cutting and stopping at any position in the working process to achieve high work efficiency. 
3. The piston adopts foreign bsf grid to seal, not only can maintain the shear force at high oil temperature, but also is used for processing and cutting various scraps into various specifications for a long time. Flame cutting reduces processing costs. The gantry shears are made of various steel plates, copper plates, aluminum plates and non-metallic materials with the thickness of the machine tool. 
In addition, the materials are no hard marks, welding slag, slag inclusions, weld materials, and super thickness is strictly prohibited. Eliminate the use of gantry shears for overload. Do not shear hardened steel and hard steel, high speed steel, alloy steel, castings and non-metallic materials. The gantry shearing machine of our company is of high quality and low price. The gantry shearing machine avoids material jamming, effectively raises the shearing power level, and has the characteristics of ring running cost and rising shear power level. as more information ,please visit : www.nkbaler.com 

2019-10-11