News Show-Shaanxi Nick Machinery Equipment Co.,Ltd

Scrap Cutting sheari...

According to the purpose of the shearing machine,the shearing machine can be divided into two categories:head shearing machine and cut-to-length shearing machine.
The characteristic of the shearing machine is that it can shear the moving rolling piece horizontally,and it has three basic requirements:

1.The shear blade should move with the moving piece when cutting the rolling piece,that is,the shear blade should complete both cutting and moving at the same time,and the instantaneous speed of the shear blade in the moving direction of the piece should be the same as that of the rolling piece.The moving speed of the pieces is equal or greater than 2% to 3%.

2.According to different product varieties and specifications and user requirements,the same shearing machine should be able to cut multiple specifications to length,and make the length tolerance and the quality of the cut section meet the relevant national regulations;
3.It can meet the requirements of rolling mill or unit productivity.
According to the actual needs of everyone,the Nick brand shearing machine has been recognized by many customers with high-quality qualifications and professional craftsmanship and is trustworthy.

Web:www.nkbaler.net,Tel:86-29-86031588

2020-11-07

Share：
cotton bales cotton ...

Cotton processing is the continuation of cotton production (cotton industry) and an indispensable transition between the cotton industry and the textile industry.The cotton processing factory is the link and bridge between agricultural production and farmers.
The purpose of cotton processing is to separate fibers and cotton seeds to produce lint,linters,cotton seeds,stick oil and by-products,so that they have use value.

In the cotton processing process,it removes impurities,reduces water content,improves quality,reduces volume,and uses a cotton hydraulic baler to make bales.Make it easy to store,keep and transport.

This kind of labor process in which machines are used to change the shape and shape of the original cotton product through a certain method of labor,increase its value,or make it into another new product,is called cotton processing.
It can be seen that cotton processing enterprises are productive enterprises that conduct preliminary processing of seed cotton.Among them,the most indispensable equipment is the cotton baler.

Nick brand cotton baler is safe and reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production

Web:www.nkbaler.net,Tel:86-29-86031588

2020-11-06

Share：
Maintenance of cotto...

The equipment is taken care of by general methods such as wiping,cleaning,lubrication,adjustment,etc.,to maintain and protect the performance and technical condition of the cotton hydraulic baler,which is called cotton baler maintenance.
There are four main requirements for the maintenance of cotton hydraulic baler:
1.Cleaning:the inside and outside of the cotton hydraulic baler are clean and tidy.There is no oil on all sliding surfaces,chains,racks,oil pumps,oil holes,etc.,and no oil leaks at all parts.The chips,debris and dirt around the cotton hydraulic baler should be cleaned clean.

2.Neatness:the material placement,finished paper,finished paper,and power lines in the venue must be organized.

3.Good lubrication:add oil or change oil on time,keep oiling,no dry friction,normal oil pressure,bright oil mark,unobstructed oil path,and the oil quality meets the requirements.
4.Safety:Follow the safe operation rules,do not use the equipment overloaded,the safety protection device of the cotton hydraulic baler is complete and reliable,and timely eliminate unsafe factors.
Frequent maintenance,the cotton baler can produce better.

Nick brand cotton baler has simple structure,small volume,simple daily operation and maintenance,convenient transportation and storage,continuous operation and high efficiency.

Web:www.nkbaler.net,Tel:86-29-86031588

2020-11-06

Share：
waste paper sorting ...

The waste paper sorting center has a complete set of waste paper sorting lines and automatic waste paper baler Press machines.

The waste paper sorting machine pipeline is mainly for manual sorting.The automatic baler Press machine is automatic feeding,and automatic baler Press can be realized without people.Chemical operation,with an hourly output of 40-50 tons.

The professional waste paper sorting and processing center is an important link in the recycling system of renewable resources.It has a waste paper sorting machine,a fully automatic waste paper packaging production line,equipped with forklifts,loaders,electronic scales,transportation vehicles and other equipment to carry out waste yellow board paper,Recycling,sorting and processing of book paper and old newspapers.

After the waste paper is specially processed by the sorting and processing center,it is sent to the paper mill for recycling.
Waste paper recycling can produce huge economic and social benefits in terms of reducing pollution,saving primary fiber resources and energy.Using waste paper as a renewable resource can enable the paper industry to achieve a virtuous cycle of resource-production-consumption-resource regeneration.

It is a typical low-carbon,circular economy,and its ecological and environmental protection is of great significance.

Nick brand horizontal baler is safe,reliable,low power consumption,economical and reasonable,convenient to use,simple to maintain and operate,which can well meet the application of waste paper sorting and processing center.
Consulting telephone:86-29-86031588.For more,please visit:www.nkbaler.com

2020-11-05

Share：
Fully automatic stra...

We can use a straw baler to complete the task of baling.According to the needs of the work,we can choose two methods,manual filling or mechanical filling.The packaging belt first sets a fixed position size.
After passing through the heated area,the baler Press belt is packed by air pressure and vacuum.The material can be filled in the filling area,and then it enters the heating and sealing packaging area,and then according to the packaging requirements,
It can be processed automatically by oil vacuum or filled with protective gas,and then heat and pressure sealing.

Finally,the packaged product is formed by cross-cutting,longitudinal cutting or corner trimming,and the cut corners can also be collected and cleaned by a suction storage bucket or a hoisting device.

The straw baler technology that uses this thermoforming for packaging has many advantages:
1.It has a wide range of applications and can be solid.baler Press of some liquids,fragile products and soft and hard materials.

2.The production efficiency is high,which can greatly save manpower.The process of forming the package is automatically completed by the machine,and only needs to be manually filled or completed by a filling machine.The packaging speed is higher.

3.The entire packaging process basically does not require human hands,from the compression to the packaging process in one go.

Nick brand automatic straw baler can be completed by machines,saving labor,improving work efficiency,convenient and fast.

company's website:www.nkbaler.net,or call:86-29-86031588

2020-11-05

Share：

...

233

...

News Center