Today’s market is uncertain, changing circumstances, and strict environmental inspections in steel mills have caused steel mills to have strict requirements for smelting scrap iron and steel raw materials, especially for the extremely high control of the impurity rate of scrap iron lumps, requiring that the size of scrap iron lumps should not exceed 400 *400mm, the impurity in the bale should be low, otherwise severe punishment and deduction. Such strict requirements are facing severe tests for the scrap iron recycling industry. The size of the bales packed in the scrap iron recycling process in the scrap iron recycling industry must be controlled within 400*400 mm. Some regions require stricter requirements. It cannot exceed 300*300mm, which is convenient to enter the furnace, saves energy in the smelting process, and makes emissions more environmentally friendly. Nowadays, the Baler of Nick Machinery is also advancing with the times. The main machine is made of all-steel welded steel, which has uniform force and will never be deformed. It can be operated by remote control or manually, which saves labor costs. All kinds of scrap iron are packed into briquettes, which is convenient for loading and smelting in the furnace. The size of the bales can be determined at will, and the density of the bales is high, which saves transportation costs. The operation is simple and convenient. The investment is small. It has a far-reaching influence and a huge contribution to the scrap iron recycling industry.

The NKY series scrap iron baler produced by Nick Machinery can reuse waste materials. More importantly, it can promote the conversion of a series of economic chains, while responding to the country's current economic development policies and taking the path of sustainable development.

2021-07-23

1. Automatic stop device When the strapping action is completed and no operation is performed within 60 seconds, the Baler has a compact structure design and the motor automatically stops and enters the standby state.
2. Microcomputer PLC control, high degree of automation, plug-in circuit board to control the Baler action, and computer-assisted error correction function.
3. Advanced equipment improves efficiency, introduces foreign advanced equipment, extends the service life of the baler, and improves the efficiency of the baler.
4. Machine application high-performance low-noise hydraulic circuit system, using imported oil pressure accessories, the whole machine has stable performance and low noise.
5. Convenient and simple to use, easy to install machinery and equipment, without special site infrastructure.

Nick Machinery is a manufacturer specializing in the research and production of hydraulic machinery and packaging machinery and equipment. It has a professional R&D design and after-sales team. If you need a packaging machine, choose the Nick packaging machine.

2021-07-22

Natural fibers (such as plant fibers) are widely used in the textile industry as fillers or woven materials. The common feature of almost all natural fibers (such as coconut shell, palm fiber, wool, cotton, etc.) is that they are very fluffy. Therefore, it is very important for exporters of natural fibers to compress the fibers into tight bales to save space and transportation costs.
Natural fibers have a greater rebound force when compressed. For materials with high resilience, a heavy-duty baler must be selected, so that the machine can withstand the resilience of the compressed material. The second is the pressure of the baler. Generally, the original density of natural fibers is low. A large-tonnage baler should be selected to ensure the ideal bale density. Generally, the tonnage is 80 tons and above. The last point is that the inner wall of the baler should be designed with a rebound hook to effectively prevent the material from rebounding, thereby improving the packaging efficiency.
Regardless of whether it is a vertical baler or a horizontal baler, as long as the above conditions are met, this baler is suitable for beating natural fibers. But is it vertical or horizontal more in line with your requirements? It depends on the amount of packaging you need and local labor costs. If you need to pack more than one ton of materials per hour, then the fully automatic horizontal machine is the ideal choice. However, if the local labor cost is lower, you can also choose a more economical vertical baler, which has reached the target output by purchasing multiple units at the same time. Exporters of natural fibers generally choose balers with a tonnage of more than 100 tons to produce high-density bales to maximize loading.
Although fiber importers hope that the density of the bale should not be too high so that they can easily unpack the loose fibers into the production process, the weight of the container is critical to the fiber exporters. The density of the bale directly determines the weight of the cabinet. The more compact the bale, the higher the density and the higher the weight of the cabinet. In this way, the transportation cost evenly spread to each bale can be reduced, making the price of the fiber more competitive. However, for fiber packaging, we do not recommend using a baler with a tonnage of more than 200 tons, because the density of the bale will be too tight, which will cause difficulties in unBaler and restoring the fiber to a fluffy state.

Nick Machinery is a professional manufacturer of hydraulic machinery and packaging equipment. It provides a variety of styles of packaging machines. Welcome to purchase the packaging machines that suit your needs. www.nkbaler.net

2021-07-22

The metal shavings Baler machine can directly cold press iron shavings, steel shavings, copper shavings, aluminum shavings, and mineral powder into cakes for storage, transportation and recycling in the furnace. After being compressed into blocks, the recovery loss is very low. The entire production process does not require heating, adding additives or other processes, and is directly cold-pressed to form. At the same time, the forming also ensures that the raw materials are unchanged. For example, cast iron is replaced by cast iron after it is formed. For castings of special materials, recycling is even more important.
Metal balers are classified according to pressure: 60 tons, 100 tons, 135 tons, 160 tons, 200 tons, 250 tons, 400 tons, 600 tons, etc.
The electrical part of the metal chip Baler machine adopts PLC control, which has strong anti-interference ability, high degree of automation and simple operation. The hydraulic station adopts the integral inherited valve block to prevent oil leakage, reduce the oil temperature of the system, and improve the stability of the system. The frame part adopts integral steel castings, which prevents the steel plate welded parts from cracking and improves the reliability, stability and service life of the equipment. Tandem cylinders are used to improve movement speed and production efficiency. According to the user's working conditions, there is an automatic feeding machine, which reduces the labor intensity of the workers.
The metal chips of the metal chip Baler machine are cold pressed into a standard return material, the coke is cold pressed into a combustible cake, and other special materials are cold pressed into a shape. Material: iron flakes, aluminum flakes, steel flakes, alloy flakes, ductile iron flakes, iron concentrate powder, coke, nickel powder, ball milled iron flakes, sponge iron, magnesium powder, silicon powder, slag powder, metal bottle caps and other metal flakes . It is mainly used for cold pressing of powdered or granular copper scraps, aluminum scraps, cast iron scraps, ball milled iron scraps, sponge iron, steel scraps, iron ore powder, silicon powder, slag powder and other non-ferrous metal scraps into 2.5-10kg cylindrical cakes. Need any additives, bulky. Automatic scrap and machines are suitable for large-scale metal scrap companies, large-scale foundries, wind power component casting companies, and copper and aluminum product manufacturers to select customers.

Nick brand metal Baler machine can be customized according to user needs. There are many models and quality is guaranteed. Welcome to buy. www.nkbaler.com

2021-07-21

The fully automatic waste paper box baler includes a frame, electrical cabinet, feed port and main hydraulic system. A material channel is arranged horizontally and coaxially in the frame. The upper part of one end of the material channel is equipped with a feed port, and a frame on the side of the feed port A main hydraulic system for Baling is coaxially installed on the outer side, and the main hydraulic system includes a main pressing plate for laterally squeezing the material in the material channel.
Advantages and effects of automatic waste paper box Baling machine:
1. This baler can automatically feed and detect, and continuously discharge the package, or it can be done manually. It can be used for waste paper, cardboard boxes, newsprint, etc., waste plastics, PET bottles, plastic films, turnover boxes, etc., straw and other loose objects The packaging effect is good.
2. The utility model has the advantages of fast packaging speed, time saving and power saving, low failure rate, high degree of automation, no need for manual care, labor saving, high reliability and long service life.
The automatic waste paper box baler is provided with a counting device on the bag outlet cover, the outlet of the baler is an open structure, and a discharging pressing device is coaxially fixed on the frame on the outlet side of the baler. The utility model has the advantages of fast Baling speed, time saving and electricity saving, low failure rate, high automation degree, no need for manual care, labor saving, and high reliability.

Nick Machinery's automatic waste paper box Baling machine automatically packs, unmanned operation, fast speed, simple structure, stable action, low failure rate and easy to clean.

2021-07-21