WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • Insufficient pressure of the small waste paper baler will cause the type of waste paper to be punched out is not very neat, and the density will not reach. During our handling and transportation, it is easy to cause loose bags. Nick's analysis: The main reasons for the low pressure of the hydraulic waste paper baler are as follows:
    1. Check whether there is no abnormal sound when the oil pump is operating at high pressure. If there is abnormal sound, there is a problem with the oil pump; confirm the suction and discharge ports of the pump, and fill the pump with hydraulic oil before starting the hydraulic pump. The oil inlet and outlet of the hydraulic pump of the small waste paper baler should be well sealed and must not leak or enter the air. If it is confirmed whether there is air entering, you can apply butter to the sealing part to see if the noise of the pump is significantly reduced to determine whether there is air entering the pump during operation.
    2. Adjust the pressure of the relief valve (pay attention to whether the oil gauge has changed, do not overpressure),
    3. Check whether there is oil leakage in the hydraulic system when the machine is working and pressing.
    4. Check whether the quality of the oil is qualified, whether there is pollution, the oil filter is blocked, the liquid flow channel is too small, and the viscosity of the oil is too high, so that the oil cannot be absorbed.

    5. Check whether the motor power of the waste paper baler is insufficient and whether the speed is too low.


    NICKBALER reminds you that in the process of using the waste paper baler, you must strictly follow the product instructions and do not ignore some small details to ensure safe and effective production. If you have any other questions, you can go to the NICKBALER Company website to learn https://www.nickbaler.net
    2022-11-10
    Share:
  • NICKBALER's NKW1600BD baler adopts a closed structure, which makes the package compact, neat and beautiful.
    Semi-automatic baling machine is suitable for packaging of loose materials such as waste paper, plastic, lint, waste paper boxes, cotton yarn, packaging bags, knitted velvet, sacks, silk, hops, wheat straw waste, etc.
    The package outlet adopts the design of double hydraulic cylinders to open the door, which is tighter and denser than the traditional "doorless" package;
    Working method: strong hydraulic Baling Machine, machine threading and manual trapping.
    Bottom structure: roller track
    Bag push system: Roller device is used to effectively improve the speed of bag push

    It can be equipped with a conveyor line to realize fully automatic conveying of materials and improve production efficiency

    NICKBALER has accumulated rich experience in the use of semi-automatic baling machine, and has mastered relevant skills and knowledge, follow us at https://www.nickbaler.net
    2022-11-09
    Share:
  • The hydraulic baler is mainly composed of the main frame system, hydraulic system and auxiliary components.
    Hydraulic baler frame system: high-quality thickened steel plate with gas shielded welding to cast a solid frame, advanced mechanical design makes the equipment durable.
    Hydraulic baler hydraulic system: The key components such as hydraulic pump, solenoid valve and hydraulic cylinder oil seal use imported accessories, which make the baling pressure high, fast, durable and low noise.

    Hydraulic baler electric control system (optional): original domestic electric control, travel switch, button, quality assurance.

    NICKBALER has a professional R&D design and after-sales team. If you encounter any difficult problems during use, you can contact us at any time https://www.nickbaler.net
    2022-11-08
    Share:
  • 1. The hydraulic system of the waste paper baler is the main cause of noise. For example, the valve core is caused by improper matching between the slide valve and the valve hole, or the contact between the poppet valve and the valve seat is stuck by dirt, the damping hole is blocked, the spring is skewed or invalid, etc. Stuck or cannot move in the valve hole, causing system pressure fluctuations and noise.
    2. Improper adjustment of the reversing valve of the waste paper baler makes the spool of the reversing valve move too fast, causing reversing impact, resulting in noise and vibration. 

    3. The vibrating oil pipe of the waste paper packaging machinery is slender and has many elbows without being fixed. When the oil flow passes through, especially when the flow rate is high, it is easy to cause the pipe to vibrate, the rotating parts of the motor and hydraulic pump are unbalanced, or the installation When the alignment is not good, or the coupling is loose, etc., vibration and noise can be generated.

    NICKBALER has a professional R&D design and after-sales team. If you encounter any difficult problems during use, you can contact us at any time https://www.nickbaler.net
    2022-11-07
    Share:
  • ICKBALER will share with you: How to install and debug the baler? Hope to be of some help to you. The debugging method is as follows:
    the first method:
    1. After the machine is installed, turn on the power supply of the baler, test the machine with no load, loosen the system overflow valve to make the system overflow squarely, start the motor (the method of stopping after starting), and check the direction of the motor. Can the steering be different from the oil pump sign.
    2. Start the motor and check whether the oil pump is stable and reliable during operation. There is no obvious noise in the pump, if not, stop the test machine work.
    3. Gradually adjust the relief valve handle of the waste paper hydraulic baler, so that the pressure value is about 8Mpa, and operate according to the operation sequence.
    4. Stop single action for each oil cylinder to see if it runs smoothly and without vibration, and gradually adjust the parallelism of the main pressure cylinder and side pressure cylinder with the bottom plate and side frame, fix the main pressure cylinder and side pressure cylinder, and use the adjustment support. The seat supports the rear of the cylinder.
    The second method: load test machine
    1. It is necessary to adjust the system pressure of the waste paper baler, so that the pressure value is about 20~26.5Mpa, and tighten and tighten the nut.
    2. Add material to the feeding port, use the physical packaging method for the load test, press 1~2 blocks, and hold the pressure for 3~5 seconds after the stroke of each waste paper hydraulic baler cylinder is in place, and conduct the pressure resistance test of the system.

    Testing the waste paper baler according to the above method can not only check the problems of the waste paper baler, but also solve the problems quickly, so as to ensure the quality of the waste paper baler!

    For more common sense of hydraulic baler repair and maintenance, please pay attention to the NICKBALER website https://www.nickbaler.net
    2022-11-04
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top