WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • The packaging categories of plastic bottle balers are mainly waste glass bottles, waste paper, waste cloth, waste plastics, films, waste foam plastics and wood. Among them, waste cotton and hemp textile packaging materials can be used as high-quality paper; wood can be reused according to its quality, even if it is not recycled, because its basic composition of cellulose is easy to rot, decompose and be absorbed by the soil, there is no residue, and it will not give 
    The environment poses a hazard. Other packaging wastes are generally harmful to the environment. The inspection of plastic bottle balers is a planned preventive inspection. In addition to human senses, the inspection method must also be carried out according to the inspection card. The inspection is also called regular inspection. The plastic bottle baler has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and
    maintenance, safety and energy saving, and low investment cost of equipment basic engineering.
    Plastic bottle baler equipment should be thoroughly inspected: the quality of inspection equipment for oil cylinders and electrical appliances is directly related to its material and grade. Generally, good-quality equipment is not only flexible, fast and efficient, but also wear-resistant and wear-resistant. It feels good to the touch and has a long service life. This is one of the ways to judge its quality. Then technology is also the key. Technological innovation has an

    important impact on the entire operating system. It may speed up the operational efficiency of products, or it may implement automatic packaging alone. The regular maintenance work of the plastic bottle baler should formulate a material consumption quota and be assessed according to the quota. The maintenance of the plastic bottle baler should be included in the assessment content of the worker contract responsibility system. The maintenance of the plastic bottle baler is the basic work of equipment maintenance and must be standardized.

    The above are the problems that need to be paid attention to in the use of plastic bottle balers. If you have other problems caused by failures during use, or encounter other problems that you want to know, you can enter the Nick Machinery website to contact: https ://www.nkbaler.com
    2023-08-14
    Share:
  • Fully automatic waste paper balers are now more equipment used in our lives and in various fields. Its appearance greatly facilitates the transportation and storage of items, thus saving companies a lot of transportation costs.
    When the equipment is in use, it often encounters such problems. Among them, paper jam is a relatively common problem. So what is the cause of the paper jam in the automatic waste paper baler and how to deal with it?
    1. The tape reel adjusting nut is too tight. The pulley is mainly a fixed belt roll. In the process of moving the carton, the tape roll rotates to achieve sealing, but if the tape roll cannot be rotated, the state of the cassette occurs naturally. At this time, just loosen the tape reel adjusting nut.

    2. The height adjustment of the box of the automatic waste paper baler is unreasonable. The main performance of this unreasonable is that the height adjustment is too low, and the upper extension part cannot be transported through the cardboard box. At this time, you can push the carton by hand. If there is no push, the height will be higher.

    Nick Mechanical Baler truly embodies the fast and efficient packaging. Save electricity, labor, and time. Adopting imported original sealing parts, the oil cylinder has a long service life and a wide range of applications. www.nkbaler.net
    2023-08-10
    Share:
  • At present, the waste paper baler industry in various parts of our country is developing rapidly and has great potential for development. However, a series of problems have also appeared in this rapid development process. Although the number of manufacturers of waste paper balers is constantly increasing, the development of new products of waste paper balers has been relatively slow. Most manufacturers have spent their manpower and financial resources on increasing their factories and expanding their scale.
    In today's modern society, most manufacturers are reluctant to develop new products by themselves, and just want to imitate other people's waste paper baler equipment models. Manufacturers that open up new equipment are also unwilling to spend any precious time and money developing new waste paper baler products, which has led to an unusually slow pace of upgrading and upgrading of new products for waste paper hydraulic balers.
    In today's motherland, many manufacturers of waste paper balers lack the awareness of protecting their own intellectual property rights. They have not applied for patents in all aspects for the new products and new technologies they have researched, and have carried out effective property rights protection. Soon after this type of new product enters the market, it will be easily imitated by other waste paper baler manufacturers and put in a lot of labor production.
    Judging from the above problems, firstly, the enthusiasm for research and development of waste paper baler manufacturers has been greatly affected, and even many manufacturers have given up investment in this area;

    Second, the technology of waste paper balers and the development of new products are slow, and the technology of waste paper balers in some developed foreign countries is getting farther and farther, so every manufacturer of waste paper balers in our country needs to strengthen The awareness of intellectual property protection prevents opportunistic manufacturers from succeeding, and strives to improve the competitiveness of my country's waste paper baler industry in the international market!

    Nick mechanical baler has the advantages of time-saving, convenient operation, labor-saving, strong bearing capacity, cost-saving, stable and reliable. www.nickbaler.net 
    2023-08-09
    Share:
  • This series of equipment is classified into two types: vertical type and horizontal type.
    Components:
    This series of equipment is mainly composed of the following components:
    ①Main machine: It is composed of frame, main hydraulic cylinder, pusher hydraulic cylinder, bottom hydraulic cylinder, matching mold frame and mold, and indenter number.
    The frame part is composed of upper and lower beams and uprights. The upper and lower beams are all made of all cast steel parts. The upper and lower beams are connected by inner and outer nuts with four columns to withstand the tension during operation.
    The main hydraulic cylinder eliminates steel castings and eliminates safety hazards. Ensure the service life and operational safety of the equipment. Supporting mold frames and molds, the top number of indenters, through professional planning, cooperation, and superior processing capabilities are the guarantee for an outstanding taste of the equipment.
    Hydraulic station: It is composed of motor, hydraulic pump, pump protection device, professional control valve block and piping system for connecting briquetting machine. The planning is reasonable and the quality is stable. Equipped with a cooling system to prevent the equipment from being unable to operate continuously due to overheating of the oil.
    Console: It is composed of electrical system and plc control system.

    Equipped with an adjustable text display, the sequence of actions and each action moment are completely controlled by the PLC system, and can be adjusted by the operator at any time, which is convenient and quick, simple and easy to understand.

    Nick Machinery's metal baler is mainly suitable for steel mills, recycling and processing industries and non-ferrous and ferrous metal smelting industries. Contact consultation telephone 86-29-86031588
    2023-08-08
    Share:
  • Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.
    Common causes of failure: the overflow valve fails, and the oil pump is not working properly.
    Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.
    1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.

    2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.

    Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nkbaler.com
    2023-08-02
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top