WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.
    Common causes of failure: the overflow valve fails, and the oil pump is not working properly.
    Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.
    1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.

    2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.

    Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nkbaler.com
    2023-08-02
    Share:
  • Regardless of the price of the waste paper baler, regardless of weight. The price of each piece of waste paper baler for equipment is very cheap. In fact, this is a big misconception. At this stage, some agents produce net weight packaging from manufacturers, only considering the net weight of a single roll, rather than the calculation of the length of the whole bundle. Different waste paper baler manufacturers are likely to produce waste paper balers of different specifications and different thicknesses. . Similarly, different types of waste paper balers are different in thickness, which makes it possible for manufacturers of waste paper balers with the same length to produce waste paper balers of different specifications.
    The whiter the waste paper baler, the better. Some waste paper balers are manufactured using purchased raw materials, but the color tone of the purchased raw materials waste paper baler is not white. The fineness of the equipment waste paper baler is actually fluorescent Brighteners, calcium bicarbonate, chemical raw materials,

    This kind of fineness is different from the raw materials. The fineness of the waste paper baler is a bit completely transparent. Of course, the fineness of the added fluorescent brightener is too shallow. This type of fluorescent brightener will not only harm the waste paper baler. The support and adhesion strength will continue to cost the waste paper baler.

    Nick Machinery is a professional service manufacturer specializing in the development, production, sales and service of hydraulic machinery and packaging machinery. Feel free to contact us at 86-29-86031588 or https://www.nkbaler.net
    2023-07-27
    Share:
  • When choosing a waste paper baler, you need to pay attention to the following functions:
    1. Can be used: Products that cannot be achieved even if the function is basically used are substandard products. It cannot be put into production, has no use value, and the equipment itself has no value. Among the packaging machine manufacturers, there are some small companies that are filling substandard products and putting them on the market.
    2. Easy to use: Evaluate the usefulness of the waste paper baler, including equipment efficiency, failure rate, working hours, maintenance, etc. Such equipment can complete the workload and enable production to continue.
    3. Scope of application: There are many types of equipment. Generally, one type of equipment can meet the production needs of various packaging stations. However, considering the amount and packaging of raw materials, an applicable device is required. This saves investment and obtains many benefits.

    The waste paper box baler pump has the advantages of high rated pressure, compact structure, high efficiency and convenient flow adjustment. It is widely used in high pressure, high flow and flow demand adjustment, such as waste paper box balers, construction machinery and ships. Piston pump is a kind of reciprocating pump that generates high pressure.

    Nick Machinery supports product customization, available from stock, and supports customized production models and specifications. For details, please call customer service. https://www.nkbaler.com
    2023-07-24
    Share:
  • 1. The tape length control potentiometer is at the zero position. The tape length control potentiometer is at the second position from the left on the front panel switch plate. Adjust clockwise, the length of the tape out will be longer, otherwise it will be shorter; if it is at the zero position, the tape will not be out.
    2. The belt is not worn correctly. Open the right door, and follow the "threading process method" or the drawing diagram of the belting indicated in the instruction manual to correctly thread the belt.
    3. There are foreign objects in the machine. The packaging machine has been used for a long time, and it has not been cleaned and maintained in time, resulting in the accumulation of stolen goods in the machine and the unsmooth delivery of the belt. More cleaning and maintenance should be done.
    4. The gap between the belt feed rollers is incorrect. The size of the gap between the belt feeding rollers of a pair of semi-automatic baler is very important to the normal belt feeding. For the adjustment of the gap, please refer to the instructions in the manual. Adjust carefully until the gap between the belt feed rollers is only 0.05-1mm more than the 
    belt thickness.
    5. The selected PP tape is too thick or too thin. Because there are many manufacturers of PP strapping belts, the thickness is also inconsistent, so you should choose them according to the requirements; if it is impossible, please carefully adjust the gap between the feeding and rewinding rollers according to the method of the manual.

    6. The electromagnet is not working properly. The electromagnet does not work. First check whether the welding head of the electromagnet connection is off, and then check whether the coil is burned out. If there is no abnormality in both, check whether the electromagnet is displaced or blocked by stolen goods, making the head unable to move freely.

    NICKBALER company is determined to provide high-quality fully automatic horizontal baler products for the majority of demand groups, and always adheres to the principle of integrity and reciprocity, and insists on using sincere service to impress customers. https://www.nkbaler.com

    2023-07-07
    Share:
  • The use of equipment requires protection, and the hydraulic baler is no exception. As far as the hydraulic baler is concerned, the protection operation is mainly composed of three parts: 1. Daily protection. 2. Professional protection. The following is a detailed introduction to these two kinds of protection tasks which need to be done in detail.
    The daily protection is mainly carried out by the operator of the hydraulic baler, checking before the shift and cleaning after the shift to ensure that the mechanical and electrical equipment is in an outstanding technical condition. Timed protection is also called first-level maintenance, which is carried out by the mechanical protection division of the operating unit and assisted by repair personnel. It is similar to a minor repair, and the protection period varies with different electromechanical equipment. The content includes disassembly inspection of maintenance parts and key parts; cleaning and dredging of oil circuit and smooth system; adjustment and inspection of the gaps of various parts; fastening of various components and parts; maintenance and repair of electrical components, etc.

    Professional protection is justified by professional personnel. Generally, it is carried out by professional and skilled personnel from the manufacturer or seller of the machine. The work they carry out is more professional. Generally, the core components of the machine should be carried out on a large scale. Inspection and maintenance together should promptly discover potential faults and solve them in time to prevent users from appearing faults in the process of use and delaying production.

    Nick Machinery is determined to provide high-quality fully automatic horizontal baler products for the majority of demand groups, and always adhere to the principle of integrity and reciprocity, and insist on using sincere service to impress customers.https://www.nkbaler.com
    2023-07-05
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top