WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
  • What methods can the automatic waste paper baler use to check whether the equipment is normal before it is produced, and how to operate it? Now let's give you a specific explanation:
    1. No-load test machine: turn on the power of the waste paper hydraulic baler, loosen the system overflow valve to make the system overflow smoothly, start the motor (using the method of stopping after starting), and observe whether the rotation of the motor is consistent with the sign of the oil pump . Start the motor and observe whether the oil pump is stable and reliable during operation. Whether there is significant noise in the pump, if not, the test machine can be carried out. Gradually adjust the overflow valve handle of the waste paper hydraulic baler so that the pressure value is about 8Mpa. Operate according to the operating sequence, and perform single-action on each cylinder to observe whether it runs smoothly and without vibration, and gradually adjust the main pressure cylinder and side pressure The parallelism between the cylinder, the bottom plate and the side frame, fix the main pressure cylinder and the side pressure cylinder, and use the adjusting support to support the tail of the cylinder.

    Automatic waste paper baler

    2. Load test machine
    (1) The load test can be carried out after the single-cylinder operation is recognized.
    (2) Adjust the pressure of the waste paper hydraulic baler system to make the pressure display value about 20~26.5Mpa, and tighten the nut. Do several packing sequences in the order of manipulation. Feed material to the compression chamber, and use the form of packaging for the load test. Press 1~2 bales and hold the pressure for 3~5 seconds after the stroke of each waste paper hydraulic baler cylinder is in place. Do a pressure test on the system and observe if there is any Oil leakage, if any, should be eliminated after the system is depressurized.
    Nick Machinery has a professional R&D, design and after-sales team. If you encounter any difficult problems during use, you can always contact us www.nkbaler.com.
    2021-04-08
    Share:
  • The aluminum can Baler Compactor is very suitable for compressing hollow plastic bottles, aluminum cans (pop cans), cola bottles, oil bottles, etc. into compact packages, which is convenient for transportation and storage, and also greatly saves costs. Therefore, aluminum can packing machine is an ideal plastic bottle and aluminum can packing machine, also called bottle packing machine or aluminum can compressor. This Baler Compactor is a high-quality choice for the recycling industry of plastic aluminum cans and bottles.
    Due to the characteristics of the packaging material, the aluminum can Baler Compactor has a wetted drainage system. In the process of packing and compressing bottles or cans, if there is residual liquid in the bottles or cans, these liquids will be discharged into the liquid receiving tray, thus making your packaging work environment more tidy.
    The maximum bale weight that the aluminum can baler machine can reach is about 3400kg (of course, the bale weight depends on the density of the packaging material before compression). We provide several standard models, different models with different compression forces, to ensure that they can meet customers Various needs. Of course, we can also customize the size of the compression chamber according to your special requirements.

    It adopts the right-angle opening method, which can carry out "Tichuang" packing, high load structure, automatic bag turning device, safe and reliable.

    Packing machine application: PET bottles, disposable plastic tableware, cola bottles, soda bottles, aluminum cans (pop cans), oil cans, etc.
    If you want to know more detailed description of the can baler, you can go to the website of Nick Machinery www.nkbaler.com, or call our sales number: 86-29-86031588.
    2021-04-07
    Share:
  • One of the important reasons why aluminum cans are widely used in the world is that they are easy to recycle and reduce energy consumption. Aluminum cans are more environmentally friendly than other packaging containers. As far as the container is concerned, repeated recycling reduces environmental pollution; as far as the materials used, the repeated use of aluminum effectively saves resources and maintains the global environment. Other packaging containers, such as the popular plastics and PET materials, are all derived from petroleum. The continuous exploitation of petroleum will cause the depletion of resources. Aluminum is a rare resource on the earth. Its main source is smelting from ore. However, the electricity required to produce aluminum is far more than other metals. Compared with smelting aluminum from ore, recycling aluminum cans into aluminum can greatly reduce energy consumption and air pollution. A discarded aluminum can still exists on the surface five hundred years later and cannot be decomposed. Aluminum cans not only have the highest recyclability rate, but also the largest recycling volume, so the recycling of aluminum cans is of great significance. As a preliminary treatment of aluminum can recycling, the aluminum can bales compressed and reduced by the baler can greatly improve the convenience of storage and transportation, while maximizing storage space and transportation costs.

     Nick Machinery has a variety of Baler Compactors that can be used to compress and pack aluminum cans, vertical Baler Compactors and mini Baler Compactors, which are mainly used in the recycling industry of small and medium-sized aluminum cans. For large can recycling centers, horizontal machines are a better choice. The hopper of the horizontal baler can be matched with the conveyor, making the feeding more convenient and efficient. For more information, please contact 86-29-86031588. There is always one suitable for you.

    2021-04-07
    Share:
  • (1) Those who do not understand the structure, performance and operating procedures of the machine shall not start the machine without learning.(2) Each lubrication point of the machine should be filled with lubricating oil at least once per shift.

    (3) The hydraulic oil added to the oil tank should be strictly used high-quality anti-wear hydraulic oil, which must be strictly filtered, and sufficient oil should be kept frequently, and the oil should be filled immediately when it is insufficient.

    (4) The fuel tank should be cleaned and replaced with new oil every six months, but the first cleaning and filtering of the oil should not exceed one month, and the new oil that has been used once is strictly filtered and allowed to be used again.

    (5) When there is a serious oil leak or an abnormal phenomenon occurs during work, stop immediately, analyze the cause and eliminate the fault, and do not force the operation with disease.

    (6) When the machine is running or packing, it is not allowed to repair or touch the moving parts with hands, and it is strictly forbidden to press materials in the bin with hands or feet.
    (7) When adjusting the pump, valve, and pressure gauge, it must be carried out by experienced technical workers. If the pressure gauge is found to be faulty, it should be checked or updated immediately.
    The above are the precautions for the use of NKQ series shears compiled by Nick Machinery for everyone. I hope it will be helpful to you. If you have other questions, you can pay attention to our homepage www.nkbaler.com, and we have professionals to ask you for answers.
    2021-04-07
    Share:
  • Shearing machine is a kind of machine tool, which adopts hydraulic drive, reliable safety performance and convenient operation. The working blade length of the shearing machine: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm; eight levels of shearing force from 63 tons to 400 tons, suitable for users of different scales and different requirements. No foot screws are required for installation, and diesel engines can be used as power in places where there is no power supply. The shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries. It can perform cold shearing, pressing and flanging of various shapes of steel and various metal materials. The shearing machines are divided into different types. : Metal shears, combined punching shears, hydraulic shears, bar shears. The most commonly used metal shears are alligator shears and gantry shears.

    The NKQ43 shearing machine produced by Nick Machinery has the advantages of low inertia, low noise, stable action, convenient and flexible operation, large cutting section, and convenient adjustment of the scissors mouth. It is safe to operate and easy to implement overload protection. Welcome to buy: www.nkbaler.com.

    2021-04-07
    Share:
Shaanxi Nick Machinery Equipment Co.,LTD 
TEL: 86-29-86031588
Fax: 86-29-86031588 Sitemap
Add: East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com Nickbaler888@gmail.com WhatsApp: 008615021631102  
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top