Straw balers will inevitably have various problems during the whole process of work. If an abnormal situation occurs, the work should be stopped, the reason should be found, and the work will be carried out after the common faults are cleared.
Problems at the gasoline pump level of the straw baler:
1. The oil provided by the gasoline pump is insufficient or there is no working pressure
Common fault reasons: gasoline pump casing, oil baffle is damaged or plunger pump is destroyed.
Solution: Repair or replace the gasoline pump with a new one.
2. The gasoline pump is noisy
Common fault causes: Gasoline pump is empty, filter is blocked, oil suction pipe or pump oil inlet is blocked, plunger pump is broken, rolling bearing is broken.

Solution: clean or replace the filter screen, clean the pipeline, replace the new plug, and the rolling bearing.

NICKBALER has always been winning the market with quality and service, and has achieved one-stop service from pre-sale to after-sale, so that customers can use it with more confidence and satisfaction. https://www.nkbaler.net

2021-10-18

The horizontal plastic bottle Baler machine is suitable for large-scale garbage recycling plants and other units and enterprises. It is a good equipment to improve labor efficiency, save manpower, and reduce transportation costs.
During the use of the horizontal plastic bottle Baler machine, if the solenoid valve fails, how should we deal with it? The editor summarizes the countermeasures for you, as follows:
The solenoid valve of the horizontal plastic bottle Baler machine cannot be closed:
1. Whether the fluid temperature and viscosity are too high → replace the solenoid valve of the corresponding port
2. Impurities enter the valve core or moving iron core produced by the solenoid valve → clean
3. The seal of the main valve core or the iron core is damaged → replace the seal
4. The orifice balance hole is blocked → clean in time

5. The operating frequency is too high or the life span has reached → reorganize the product or update the product

The horizontal plastic bottle Baler machine has the characteristics of fast speed, simple structure, stable action, low failure rate and easy cleaning and maintenance. https://www.nkbaler.net

2021-10-15

The mineral water bottle Baler machine is specially used for the compression and Baler of hollow items such as cans, PET cola bottles, oil bottles, mineral water bottles and so on.
Advantages of horizontal balers for mineral water bottles:
1. The machine adopts hydraulic transmission, horizontal horizontal bagging, high output, low failure rate of this equipment, and stable operation.
2. The pump station is equipped with a pressure gauge to display the working pressure more intuitively; the fuel tank is equipped with an oil level display gauge, which can visually display the change of oil volume, and is equipped with an electric heater function (optional) to prevent hydraulic pressure when starting in winter The oil is too thick to damage the pump; the oil tank is large enough to dissipate heat when working, so as to prevent the oil temperature from being too high in summer, the oil pressure is reduced or the seal is damaged.
3. The hydraulic cylinder is designed and manufactured according to heavy machinery standards, with reliable quality and long service life. Normally, it can be used for 20 years without any problem. If the seal has reached the end of its life, only need to replace the seal.

4. The box body is welded from thick steel plates after mechanical processing, which eliminates stress, is not easy to weld and has a long service life, so both the internal quality and the appearance quality are very good.

NICKBALER is a professional service manufacturer specializing in the development, production, sales and service of hydraulic machinery and equipment. Contact number 86-29-86031588

2021-10-15

The straw baler is a large-scale machine. This kind of machine has a relatively long use time, and it will inevitably show wear and tear during long-term use.
After the straw baler is worn out, its operation will be more or less affected, and it will also bring certain losses to the enterprise. Therefore, the straw baler should be dealt with in time after it is worn out to make it work normally produce.
When the straw baler is in use, its temperature will continue to rise. Once it stops working, the parts of the baler will cool, and the volume of the connected parts will also control each other's internal force changes.
When the straw baler is in use, it is found that the parts are deformed. It must be repaired to change the deformation of the parts. When it is used again, you must be careful.

Now the application range of straw baler is very wide. We need to know more about the characteristics and application methods of straw baler, so as to ensure the normal use of straw baler, and relatively reduce the chance of the baler showing defects.

The NICKBALER straw baler is practical and beautiful, the key components are evenly used domestic and foreign well-known products, and it has the characteristics of fast speed and high precision. https://www.nkbaler.net

2021-10-15

The horizontal tire baler is a hydraulic machine developed by NICKBALER for Baler rubber tires. It can be used to compress and pack rubber items such as tires inside and outside cars, tractors, truck tires, and engineering tires.
The main reasons for the abnormal pressure of the horizontal tire baler are:
1. The oil filter is blocked, the liquid flow channel is too small, and the oil viscosity is too high to absorb oil.
2. The viscosity of the system is too low, the leakage is serious, the oil enters too much air, and the pollution is serious.

3. The motor power is insufficient, the speed is too low, the piping is wrong, and the pressure gauge is damaged.

NICKBALER tire balers are mainly used in 4S shops and large garbage disposal sites, with reliable performance, simple operation and convenient maintenance. https://www.nkbaler.net

2021-10-15