Copyright®Shaanxi Nick Machinery Equipment Co.,LTD
NKW200Q Recycling Paper Bale Press for compressing waste paper, also known as waste paper compressor or waste paper block machine. It can compress the loosening waste paper into a firming block, so that it can facilitate transportation and processing. This device is usually used in waste paper recycling plants, printing plants, paper mills and other places. NKW200Q has the characteristics of efficient, energy saving, environmental protection, etc., which can effectively improve the utilization rate of waste paper and reduce the operating cost of the enterprise.
Recycling Paper Bale Press is a packaging machine for compressing waste paper, also known as waste paper compressor or waste paper block machine. It can compress the loosening waste paper into a firming block, so that it can facilitate transportation and processing. This device is usually used in waste paper recycling plants, printing plants, paper mills and other places.
NKW200Q Recycling Paper Bale Press has the characteristics of efficient, energy saving, environmental protection, etc., which can effectively improve the utilization rate of waste paper and reduce the operating cost of the enterprise. The machine adopts advanced hydraulic system and electrical control system, which is simple and convenient to operate and has high degree of automation. It is also equipped with a safety protection device to ensure the safety of the operator.
In addition, NKW200Q Recycling Paper Bale Press also has a variety of specifications and models to choose from to meet the needs of different customers. For example, custom design can be made according to factors such as the types of waste paper and compression ratio of customers. In short, NKW200Q is a trusted waste paper compressed equipment that can bring real economic and environmental benefits to enterprises.
| Name | parameter |
| Bale size | 1100mm（W）×1100mm（H）×～1800mm(L) |
| Material type | Scrap Kraft paper, Newspaper, Cardboard ,Soft Film, Plastic， |
| Material density | 650～750Kg/m3（Moistures 12-18%） |
| Feed opening size | 2400mm×1100mm |
| Main motor power | 37KW×2sets+15KW |
| Main cylinder | YG300/230-2900 |
| Main cylinder force | 200T |
| Capacity | 28-30Ton/hour |
| Max. system working force | 30.5MPa |
| Mainframe weight(T) | About 30 tons |
| Oil tank | 2m3 |
| Mainframe size | About 11×4.3×5.8M（L×W×H） |
| Tie wire line | 4 line φ3.0-3.2mm3 iron wire |
| Pressure time | ≤30S/ (go and back for empty load) |
| Model | NK-III |
| Conveyor weight | About 7 tons |
| Conveyor size | 2000*14000MM |
| terra hole size | 7.303M（L）×3.3M（W）×1.2M（deep） |
| Conveyor motor | 7.5KW |
| Cool tower motor | 0.75KW（water Pump）+0.25（Fan） |
Leave Your Message