WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588

News Center

You Position : Home >> News Center
The working principle of tiger head scissors
Author : admin Time : 2020-09-30 AllPageView : 473
Share:

Tiger head shears operators must be familiar with the main structure,performance and application methods of the shears.
Tiger head shears are suitable for cutting various steel plates,copper plates,aluminum plates and non-metal material plates whose material thickness is the rated value of the machine tool,and it must be materials free of hard marks,welding slag,slag inclusion,and welding seams.Excessive thickness is not allowed .
The operator of the tiger head scissors must be used according to the process above the clarification book. Generally speaking, the method of use is as follows:
1.Adjust the blade gap according to the thickness of the material to be cut.

2.Adjust the master or fixture according to the width of the cut data.

3.Make 1,3 idle strokes before operating the machine tool,and then cut operation can be performed after normal.If the shearing machine is found to work abnormally during operation,immediately block the power supply and shut down for inspection.
4.When adjusting the machine tool,it is necessary to block the power supply.When moving the workpiece,pay attention to the safety of the hand.
5.The parts of the tiger-head shears should always be kept smooth.The operator should fill the lubricating oil once per shift,and the mechanics should fill the rolling bearing part with smooth oil once every six months.
6.When operating,coordinate the movements of the limbs,stop wearing gloves,and stop pushing your hands into the pressure plate and the knife edge.
7.It is necessary to designate a special person to command for multi-person collaborative operations.Stop cutting two pieces of data together on the same shearing machine.
8.On-site cleaning operations,the workplace to prevent random piles of workpieces and debris,to ensure time to keep the machine tool and the site clean.
9.At the end of the operation,cut off the power supply and lock the power supply box.
Operating the tiger-head scissors according to the above process can not only ensure the normal operation of the machine tool,but also extend the life of the tiger-head scissors.
Tiger head shears produced by Nick Machinery have reasonable technical parameters,a wide range of applications,and low energy consumption.They are widely used in scrap metal recycling and processing industries and metal shearing in small and medium-sized steel plants to provide charge for furnace smelting.

Shaanxi Nick Machinery Equipment Co.,LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:info@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top