(1) Those who do not understand the structure, performance and operating procedures of the machine shall not start the machine without learning.(2) Each lubrication point of the machine should be filled with lubricating oil at least once per shift.

(3) The hydraulic oil added to the oil tank should be strictly used high-quality anti-wear hydraulic oil, which must be strictly filtered, and sufficient oil should be kept frequently, and the oil should be filled immediately when it is insufficient.

(4) The fuel tank should be cleaned and replaced with new oil every six months, but the first cleaning and filtering of the oil should not exceed one month, and the new oil that has been used once is strictly filtered and allowed to be used again.

(5) When there is a serious oil leak or an abnormal phenomenon occurs during work, stop immediately, analyze the cause and eliminate the fault, and do not force the operation with disease.

(6) When the machine is running or packing, it is not allowed to repair or touch the moving parts with hands, and it is strictly forbidden to press materials in the bin with hands or feet.
(7) When adjusting the pump, valve, and pressure gauge, it must be carried out by experienced technical workers. If the pressure gauge is found to be faulty, it should be checked or updated immediately.
The above are the precautions for the use of NKQ series shears compiled by Nick Machinery for everyone. I hope it will be helpful to you. If you have other questions, you can pay attention to our homepage www.nkbaler.com, and we have professionals to ask you for answers.