Users who are familiar with hydraulic balers in our country know that the pressure of hydraulic balers is realized by cylinders, so how do we determine the selection of a cylinder? What kind of items should I use and how big my cylinder should I choose? Next, Nick will simply share and learn from the classification management of cylinders.

1. Single-acting cylinder: There is only one end of the piston rod. The gas on the side of the piston accumulates energy to generate air pressure. The pressure pushes the piston out and returns by spring or its own weight. The horizontal hydraulic baler installation does not require foot screws, and the diesel engine can be used as power in places where there is no power supply. The waste paper baler is used to squeeze waste paper and similar products under normal conditions, and pack them with special packaging tapes to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. The introduction of advanced technology and advanced technology of similar products at home and abroad. All models of waste paper baler manufacturers are hydraulically driven, and manual or PLC automatic control operation can be selected.

2. Double-acting and cylinder: Air can be supplied alternately from both sides of the piston to output force in one or two development directions.

3. Diaphragm cylinder: replace the piston with a diaphragm, output force only in one direction, and return with a spring. Its sealing performance is good, but the stroke is short.

4. Impact cylinder: This is a new type of element. It converts the pressure energy of the compressed gas into the kinetic energy of the piston's high-speed (10-20 m/s) movement, thereby completing work. The impact cylinder is additionally provided with a nozzle and a middle cover of the discharge port. The middle cap and the piston divide the cylinder into three chambers, namely the head chamber and the tail chamber. It is widely used in blanking, punching, crushing, forming and other operations. The swing cylinder is called the swing cylinder. It is divided into two cavities by the blade, and the two cavities are supplied alternately. The swing angle of the output shaft is less than 280°. In addition, there are rotary cylinders, gas-liquid damping cylinders and stepping cylinders.

The above is the cylinder content shared by Nick Machinery for you. If you want to know more about hydraulic baler, you can follow us www.nkbaler.com.