1.Before using the hydraulic waste paper baler,it is necessary to keep the hydraulic oil clean.Before use,the hydraulic oil may be contaminated by the outside during the storage process,or there may be errors,so pay attention to the state of the oil before filling the oil,and deal with it in time if any problems are found.

2.Keep the system clean before installing the waste paper baler.The system should be cleaned before installing the waste paper baler.When cleaning, it is best to use the working oil or test oil required by the hydraulic device.Do not use kerosene,gasoline,alcohol,etc.Do not use cotton yarn or cotton cloth to clean the fuel tank.

3.Keep the waste paper baler clean before changing the oil.According to the application requirements,the hydraulic oil of the waste paper baler should be replaced regularly.Before changing to new oil,the entire system needs to be cleaned.After the cleaned oil is poured out,it is replaced with new oil and the operation can only be carried out after the test run.
In addition,pay attention to the wear of components in the process of using the waste paper hydraulic baler.
Nick brand semi-automatic horizontal baler is safe, reliable, low power consumption, economical and reasonable, easy to use, simple to maintain and operate. It is a good helper for your production.