In recent years, with the popularity of gantry shears, more and more users are operating and using them. In the process of use, to avoid danger due to improper operation, the following taboos for the use of gantry shears must be observed.
1. When using the gantry shearing machine, the cutting material has certain specifications. The material that is too large cannot be cut. At the same time, the thickness of the material to be cut at one time cannot be too much. It is necessary to use high hardness when cutting steel bars. blade.
2. After working for a period of time, the gantry shearing machine often needs to process the residue near the knife edge. Tools are needed during the processing, and the garbage cannot be cleaned directly by hand.
3. The operating load of the gantry shear is very large. The shearing machine must be maintained and maintained every day, and the machine tool of the shearing machine should be cleaned in time to keep the equipment stable.

4. During work, it is forbidden to operate the gantry shearing machine with overload. The material exceeding the shear thickness cannot be cut. If the material is too short, the material cannot be pushed into the shearing equipment by hand, and the steel plate needs to be used to push the material into .

The NICKBALER gantry shearing machine is hydraulically driven, which is easy to operate, simple to maintain, small in area and wide in scope of application. https://www.nkbaler.net