1. This product is used for packaging Industrial waste. The operator must follow the operation regulations.
2. The hydraulic oil must be added to the specified oil level line before use (46# hydraulic oil).
3. Before starting the hydraulic pump, check the circuit for wrong connection or leakage.
4. The surrounding area of the hydraulic turn-up plate should be cleaned up every turn-up time to prevent jamming.
5. When packing, the operator must pay attention to safety, spread the paper evenly, and place the paper in place, and close the lid of the box before packing.

6. The hydraulic operating handle should be quickly pushed to the specified position when packing, in case the hydraulic operating handle should be quickly pushed to the specified position when the valve is packed, the hydraulic operating handle should be quickly pushed to the specified position when packing, and the hydraulic oil flow is not enough, causing the motor to overrun The flow causes the motor to overcurrent. Blockage and insufficient hydraulic oil flow cause motor overcurrent.

7. After packing, all hydraulic rods must be retracted into the hydraulic cylinder to prevent dust from damaging the sealing ring and oil leakage.
8. Regularly perform maintenance work and find a mechanic to deal with any leakage in the oil pipe immediately.
9. If an abnormality is found, the operation should be stopped immediately and the cause can be eliminated.
10. After the lid door is opened, it is strictly prohibited to press the door to prevent accidents.
11. Oil pressure: It is strictly forbidden to adjust the pressure without authorization. The operator must work under the adjusted oil pressure. The maximum pressure limit is 30MPa. ?
12. The oil in the oil tank must be strictly filtered and always maintain a sufficient amount of oil. The oil tank should be cleaned and replaced every six months.
13. The lubricating parts of the machine should be filled with lubricating oil at least once a day as required, and the debris in the chamber should be cleaned once per shift.

14. Those who do not understand the main machine structure, performance and operation regulations shall not start the machine without permission. When multiple people operate at the same time, the division of labor should be clear to avoid the danger of misoperation.

15. The machine should stop immediately when there is a serious oil leak or an abnormal phenomenon occurs during work. Don't look at the place where the oil is sprayed, don't directly use your hands to plug it, and don't force it to operate with disease.
16. When the machine is running or packing, it is not allowed to repair or touch the moving parts by hand, and it is strictly forbidden to press the materials in the bin with hands or feet.
17. When adjusting pumps, valves, and pressure gauges, an experienced technician must carry out. If a pressure gauge is found to be defective, it should be repaired or replaced immediately.
18. This machine uses 46# anti-wear oil. Always pay attention to the oil temperature. Stop it when it exceeds 75°C.

19. When turning over the package, after the handle of the cover cylinder is pulled to the return position, push the turning over handle.

www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time