The heavy-duty waste metal shearing machine is a specialized equipment used for recycling and processing of scrap metals. Its main function is to cut and compress various shapes of scrap metals for subsequent processing and reuse. The machine is driven by hydraulic pressure, featuring high strength, high precision, and high efficiency, which can effectively improve the efficiency and quality of scrap processing.
The main components of the machine include the body, knife frame, upper blade, lower blade, pressure device, etc. Among them, the knife frame and blade are key components that affect the cutting effect of the equipment. The material and processing technology of these parts determine the cutting capacity and service life of the equipment. In addition, the machine is equipped with various safety protection devices, such as overload protection and emergency stop buttons, to ensure the safety of operators.
The heavy-duty waste metal shearing machine is widely used in various recycling and processing industries for scrap metals, such as steel plants, foundries, automotive manufacturers, etc. It not only improves the efficiency and quality of scrap processing but also reduces environmental pollution and promotes sustainable development.
1
Main Cylinder
Model
351/280/210
Stroke
800
315T
Nominal Force
1600KN
Quantity
2 Units
2
Press Cylinder
Model
194/160/105
Stroke
750
Nominal Force
500KN
Quantity
2Units
3
Feeding box closed Cylinder
Model
114/100/70
Stroke
400mm
Nominal Force
180KN
Quantity
8Units
4
Push Cylinder
Model
194/160/105
Stroke
6000mm
Nominal Force
500KN
Quantity
1Unit
5
Power
37Kw*2Sets(Main Power)&3Kw(Cooling System)
6
Electricity
Electricity 380V/50Hz(Three Phases and four Lines)
7
System work Pressure
25Mpa
8
Max press Height
700mm
9
Cutting Height
400mm
10
Pump
HY200 Plunger Pump*2sets
11
Capacity
5-8T/H
12
Oil supplying system
Two way cartridge valve(TAIFENG/KINEGEDE)
13
Control System
1.PLC(FATEK from China TAIWAN )
2.10’Touch screen(Weinview)
3.Fully automatic reversing valve
4.Control remote operation
14
Electrical components
1.Low voltage power supply(CHNT)
2.Manometric component( MACOME)
3.Switch( Mibbo)
15
Cooling system
Air cooling system
16
Control system
PLC(FATEK)
17
Blade length(mm)
1400
Inclination
10 degree
18
Feeding Box
6000*1300*400mm
19
Cutting times
2-3Time/Minute
20
Oil Tank
2000L with high pressure oil filter
21
Machine weight
27T
Q2: What are the main components of a heavy-duty waste metal shearing machine?
The main components of a heavy-duty waste metal shearing machine include the body, knife frame, upper blade, lower blade, pressure device, etc.
Q3: How does a heavy-duty waste metal shearing machine work?
A heavy-duty waste metal shearing machine uses hydraulic pressure to drive the movement of the upper and lower blades, which cuts and compresses the scrap metal.
Q4: What safety protection devices are usually equipped on a heavy-duty waste metal shearing machine?
Heavy-duty waste metal shearing machines are usually equipped with various safety protection devices, such as overload protection, emergency stop buttons, pressure limiters, etc.
Q5: How should I properly operate a heavy-duty waste metal shearing machine?
Operating a heavy-duty waste metal shearing machine requires professional training and familiarity with the equipment's structure, performance, and operating procedures. It is important to follow the correct steps and pay attention to safety to avoid accidents.
