Regardless of the performance of the horizontal baler, it can be summarized as the strength of the horizontal baler's execution ability. The work must ensure the stability of the operation to ensure the uniformity of the packages.
So what causes the horizontal baler to not work quickly?
1. The oil supply pressure of the horizontal Baler oil pump cannot meet the flow demand. In order to prevent the occurrence of oil leakage, strict inspection and testing must be carried out before work.
2. If the overflow valve in the horizontal baler is deformed, it will seriously affect the main valve core blockage. The main valve core is blocked in the small opening, which will easily cause some pressure oil output by the baler oil pump to overflow into the tank, causing the baler The flow of CNPC into the actuator is greatly reduced, which slows down the rate of oil supply.
3. The internal and external oil leakage is relatively serious. In fast work, it is easy to cause the oil supply pressure to be too low, but the pressure is much higher than the oil return line. When the piston seal of the Baler machine cylinder is damaged, the two sides of the Baler machine cylinder are easy The accident that caused excessive internal leakage resulted in insufficient rapid movement speed of the cylinder of the horizontal baler, and oil leakage was likely to occur in other parts.

4. A series of reasons such as the lubrication of the guide rail and the poor installation accuracy and assembly accuracy of the oil cylinder in the horizontal baler can easily cause the friction resistance to increase when the baler is working.

The baler produced by NICKBALER has the characteristics of many varieties, complete specifications, strong matching, etc., and can be designed and manufactured according to customer requirements. https://www.nkbaler.net