Any machine must be operated safely,and the straw baler is no exception.Today,Nick summarized the electrical safety operating procedures of the straw baler,and I suggest that everyone understand it.
1.Electricians must hold certificates to work.Non-electricians are prohibited from repairing electrical equipment and wiring.
2.The electrician on duty and those who perform electrical work or those who work in dangerous areas such as step voltage and electric shock near high-voltage areas must wear insulated shoes.
3.All hand-held power tools (electric welders,planing machines,hand drills and other small electrical appliances) must be grounded or connected to zero,and effective leakage protection devices must be used before use.Wear insulating gloves or be on the ground before use.Pad insulation pad.
4.All electrical equipment,electronic components,etc.,if any leakage or damage is found,stop using them immediately and notify the electrician for inspection and repair.
5.Temporary lighting should use low-voltage lamps below 36 volts,and use low-voltage lamps below 12 volts for lighting in particularly humid or metal containers.It is strictly forbidden to use high-voltage lamps with 220 volts as running lights.
6.You must wear insulated gloves when working on live lines,overhauling,or working with power tools in wet areas,metal containers,and metal frames.
7.In the event of a sudden power failure during the production process,the power supply must be cut off quickly,the machine must be operated again,and the power must be turned on in order to prevent a sudden start to cause a personal accident.
8.When pulling the high-voltage isolating switch with electricity,you must use qualified insulating rods and insulating gloves.
9.It is strictly forbidden to sprinkle water on electrical equipment and lines.Clean up water near the electrical equipment in time.It is strictly forbidden to hang clothes and other items on all electrical lines to prevent breaking and causing electric shock.
10.Make a careful record of the operation of electrical equipment
Be careful and be prepared to operate the machine.
Nick brand straw baler is safe,reliable,low power consumption,economical and reasonable,easy to use,simple to maintain and operate.It is a good helper for your production.
For more information about hydraulic straw baler,contact 86-029-86031588 or visit: www.nkbaler.net
