The metal powder cake press needs to work every day. In some large factories, it will not be idle even at night. In order to make the metal powder cake press run safely every day, it is necessary to do daily inspections. The cause of the failure can be found and determined. So, how to do the daily inspection of the metal powder cake press .I summarize it for you in three steps:
1. Check whether the screws at the pressure regulators of the flow valve and other pressure valves are loose. If the pressure regulating screw of the relief valve is loose, the working pressure of the system will not reach the predetermined value or the working pressure cannot be established, and the system will not work normally. The loosening of the adjusting screw of the pressure reducing valve will make the outlet pressure less than the predetermined value, so that the pressure reducing circuit cannot work normally.
2. The amount and temperature of oil in the tank. The amount of oil in the fuel tank should always be kept within the normal range, otherwise it should be replenished in time. The grade of the added oil must be the same as that of the system, and it must be tested to meet the specified indicators; the added oil should be filtered, and the filtration accuracy Not less than the accuracy requirements of the system 

3. Oil leakage at various sealing parts and pipe joints. It is inevitable and common for hydraulic systems to leak under working conditions. Leakage leads to a decrease in system pressure, resulting in unstable speed of actuators, wasting oil, consuming energy, reducing efficiency, increasing oil temperature, polluting the environment, and causing fire hazards. The leakage of the system mostly occurs at the fixed seal and the moving seal. The cause of leakage is usually the damage, aging, damage of the seal or the vibration of the loose connecting screw, which should be repaired in time. Leaks under non-working conditions are not allowed.

NICKBALER Machinery warmly reminds you: When using the baler, you should strictly follow the operating instructions. If you want to know more about after-sales maintenance, please contact us at 86-29-86031588