1. Put the recycled waste paper, plastic and film garbage into the hydraulic baler. When the material is loaded to the height of the pressure plate, close the door and press the "press down" button. The equipment runs automatically and is compacted. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door)
2. The pressure plate moves down and compresses to reach the maximum pressure and automatically returns to the fully open position. When compressing and Baler constraints, the pressure plate stops at the preset position of the compressed material
3. Open the door of the device, pass the tie rope from front to back through the bottom slot and return to the front through the pressure plate slot, then pull the tie rope tightly and knot it by hand. Push the Baler rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "up" button, the return stroke of the cylinder will automatically turn out the bundled bales. (No one is allowed to stand in front of the door when opening the door, so as to avoid accidental injury when the door bounces)

4. After the bale is ejected, reset the bale lever to press down. Finally, remove the bundled waste paper and plastic garbage before stacking and storing, close and lock the door to enter the next packaging cycle.

The appearance design of the NICKBALER hydraulic baler is practical and beautiful, and the key components are uniformly used domestic and foreign well-known products, which have the characteristics of fast speed and high precision.https://www.nkbaler.net/