Copyright © Shaanxi Nick Machinery Equipment Co.,LTD
Printing Paper Baling Machine, also known as strapping machine, strapping machine or strapping machine, uses strapping tape to bundle products or packages, and then tightens them and combines the two ends with hot-melt bonding using a heating iron. The function of the baling machine is to make the plastic straps close to the surface of the bundled packages to ensure that the packages will not be scattered due to weak bundling during transportation and storage. At the same time, the bundles should be neat and beautiful.
Industrial cardboard baler is an environmentally friendly mechanical equipment specially used to process and compress waste cardboard, cartons and other paper materials. These machines often play an important role in recycling centers, paper mills, packaging companies and various industries that generate large amounts of cardboard waste.
The industrial cardboard baler uses a powerful hydraulic system to compress the waste cardboard put into it at high density to form regular rectangular or other shaped bales. The volume of compressed cardboard is greatly reduced, making it easier to transport and store, and it also facilitates subsequent recycling.
These balers are usually equipped with an automatic binding device, which can bundle the compressed cardboard with plastic straps or wires after the compression is completed to ensure its stability during transportation. The industrial cardboard baler is simple to operate and maintain, and can significantly improve work efficiency and reduce the consumption of human resources.
In addition, with the improvement of environmental awareness, the use of industrial cardboard balers has positive significance for promoting circular economy, reducing landfill and environmental pollution, and is an indispensable part of modern sustainable development strategy.
| Item | Name | parameter |
| mainframe parameter | Bale size | 1100mm（W）×1100mm（H）×～1600mm(L) |
|
| Material type | ScrapKraft paper, Newspaper, Cardboard ,Soft Film |
|
| Material density | 700～800Kg/m3（Moisture 12-18%） |
|
| Feed opening size | 2400mm×1100mm |
|
| Main motor power | 37.5*2KW+15kw |
|
| Main cylinder | YG280/220-2900 |
|
| Main cylinder force | 180T |
|
| Capacity | 22-25T/H |
|
| Max. system working force | 30.5MPa |
|
| Mainframe weight(T) | About 28 tons |
|
| Oil tank | 2m3 |
|
| Mainframe size | About 11×4.3×5.8M（L×W×H） |
|
| Tie wire line | 5 line φ2.75～φ3.0mm3 iron wire |
|
| Pressure time | ≤30S/ (go and back for empty load) |
| Chain conveyor technology | Model | NK-III |
|
| Conveyor weight | About 7 tons |
|
| Conveyor size | 2000*12000MM |
|
| terra hole size | 7.303M（L）×3.3M（W）×1.2M（deep） |
|
| Conveyor motor | 7.5KW |
| Cool tower | Cool tower motor | 0.75KW（water Pump）+0.25（Fan） |
Leave Your Message