In the use of the waste paper baler, moisture should be prevented from entering, so as not to affect the normal use of the waste paper baler and cause the performance of the machine to decrease. The moisture mentioned here refers to the influence of the surrounding cooling water, water vapor or moisture. However, the various waste paper balers  appearing on the market now make many users feel dazzled. People don’t know how to choose a waste paper baler that suits them.  In fact, people have not yet understood the waste paper baler. , As long as we have an understanding of his types and functions, it is not difficult to choose a suitable Baling Press.

At the same time, we have selected a Baling Press that suits you, and you must maintain it properly during use, otherwise the Baling Press will also bring us some minor troubles. Pay attention to the anti-freezing work of the motor and the long-term overload of the motor. Effective prevention of these two can greatly reduce the damage of the motor, thereby maintaining the normal packaging of the waste paper baler. Another thing is to pay attention to the button operation of the console part, do not use excessive force on the switch button, and prevent misoperation to avoid short circuit damage. 

In the process of a working cycle, the empty stroke speed of the waste paper baler is generally high, and it has different movements and bears different loads in different working stages. Therefore, in the hydraulic system, the flow rate and pressure of the hydraulic pump are often determined according to the required movement speed and the load to be received during the working phase. Then, without increasing power consumption, a fast loop is used to increase the idle stroke speed of the working mechanism. The characteristic of the fast circuit is that the load is small (the pressure is small) and the flow is large. Double hydraulic pumps are now used for oil supply. The low-pressure pedestrian flow pump and the high-pressure low-flow pump are connected in parallel. They supply oil to the system at the same time to realize the rapid movement of the hydraulic cylinder. When entering the work advancement stage, the system pressure rises and the solenoid valve opens to unload the pedestrian flow pump. The small flow pump supplies oil to the system, and the movement of the oil cylinder becomes a slow-moving work stroke.
Nick Machinery has a professional R&D, design and after-sales team. If you encounter any difficult problems during use, you can always contact us www.nkbaler.com.