The automatic waste paper baler will inevitably have large and small problems during use. Whether the problem occurs is to repair or replace the original, it needs to be determined after consideration. If there is a problem, some users can directly replace it and solve it, which is convenient and quick. In fact, sometimes there is no need to replace the original.
The automatic waste paper baler can be repaired in many cases. The shape and size of the parts are compensated by welding, repairing, plating, turning, grinding, grinding and other technological means to meet the original accuracy and sealing performance requirements. Method, under normal circumstances, repairing takes less work than manufacturing new parts. Therefore, it is usually more economical in terms of time and cost to adopt the repair method under the conditions of the structure or work performance of the hydraulic baler parts.
Sometimes the original parts of the waste paper baler need to be replaced. If you feel that the damaged parts of the hydraulic baler have no repair value or are technically difficult to repair, and spare parts are available, you should replace them without hesitation. New parts can usually shorten the repair cycle. Generally, replacement methods are often used for wearing parts. Therefore, the hydraulic baler must also do a good job of spare parts. After considering more about its baler, decide whether to repair or replace it.