The waste paper baler should pay attention to the following items when loading the test machine:

1, should pay attention to check the tight seals and pipe joints with or without leakage.
2. When the gauge pressure reaches a large working pressure, the pressure can be stopped.
3. During the pressure holding test, within 10 minutes after the motor is stopped, the pure pressure of the table should be greater than 1.96 MPa.
4. When the gauge pressure reaches the large operating pressure, the safety valve can be automatically opened and the pressure oil flows back to the fuel tank. During the test, the temperature of the fuel tank should not be higher than 65 °C. The unloading test of the NK1070T60 frame-pressed waste paper baler is based on the ability to eject the plastic bag without encountering difficulties. The above items can be produced after they meet the requirements.