In general, the double-head baler is an industrial compression equipment with high efficiency, easy operation and easy maintenance. It plays an important role in resource recovery and environmental protection.
Item |
Name |
parameter |
mainframe parameter |
Bale size |
1100mm(W)×1100mm(H)×~1600mm(L) |
|
Material type |
Scrap Kraft paper, Newspaper, Cardboard ,Soft Film, |
|
Material density |
600~700Kg/m3(Mositure12-18%) |
|
Feed opening size |
2400mm×1100mm |
|
Main motor power |
45KW+15kw |
|
Main cylinder |
YG280/210-2900 |
|
Capacity |
12-15 ton /hour |
|
Main cylinder force |
160T |
|
Max. system working force |
30.5MPa |
|
Mainframe weight(T) |
About 25 tons |
|
Oil tank |
2m3 |
|
Mainframe size |
About 11×4.3×5.8M(L×W×H) |
|
Tie wire line |
4 line φ3.0~φ3.2mm3 iron wire |
|
Pressure time |
≤30S/ (go and back for empty load) |
Chain conveyor technology |
Model |
NK-III |
|
Conveyor weight |
About 7 tons |
|
Conveyor size |
2000*14000MM |
|
Conveyor motor |
7.5KW |
Cool tower |
Cool tower motor |
0.75KW(water Pump)+0.25(Fan) |
Double-head balers are usually used to compress loose materials such as metal scraps, plastic sheets, cardboard, cotton, waste cloth, etc. to reduce their volume and facilitate storage and transportation. This type of machine is widely used in the recycling industry, metal processing, plastic processing and other fields.
Q2: How reliable is the double-head baler?
The reliability of a double-head baler refers to the machine's ability to operate normally without failure under specified conditions. To ensure high reliability, manufacturers conduct strict quality control and testing during the design and production process. In addition, regular maintenance and inspection are also important measures to ensure machine reliability.
Q3: What safety matters need special attention during the operation of the double-head baler?
Safety is the primary consideration when operating any industrial equipment. When operating a double-head baler, ensure that all safety devices are working properly, follow operating procedures, wear appropriate personal protective equipment, and provide adequate safety training to operators.
Q4: How does a double-head baler handle different types of materials?
Double-head balers are usually designed with an adjustment system that can be adjusted according to different material properties to accommodate different types and sizes of material compression needs. For example, by adjusting the pressure and speed of the indenter, different types of materials can be processed, from metal chips to plastic sheets.
Q5: If the double-head baler breaks down, is it easy to repair?
The serviceability of a double-head baler depends on its design and ease of maintenance. Ideally, machines should be designed to be easily serviceable, with self-diagnostic capabilities and easily accessible service points. Regular maintenance and correct operation can reduce the occurrence of failures, while a responsive technical support and service network can help solve problems quickly.
Q6: How can a double-head baler ensure long-term continuous operation?
In order to ensure that the double-head baler can work continuously for a long time, it is necessary to select high-quality materials and components, as well as adopt efficient heat dissipation and lubrication systems. At the same time, reasonable use and maintenance plans are also key to ensuring long-term stable operation of equipment.