But the defects of the oil pump, the oil tank filter, and the oil pump motor will appear during the use of the
automatic hydraulic packer.
If the oil pump of the
fully automatic hydraulic baling machine does not drain, it is necessary to perform maintenance according to the following items.
1. The chain needs to be lubricated from time to time, and calcium-based grease should be added to the chain pin once a month to keep the tooth surface lubricated.
2. Pay attention to check whether the oil level of the reducer meets the specified requirements every month, and change the oil of the reducer once every six months.
3. The
waste paper materials must be filtered before entering the feeding machine, and the mineral water bottle packing machine is to prevent the fine metal scraps from entering the feeding machine and jamming the feeding machine.
Nick has a professional R&D, design and after-sales team. If you encounter any difficult problems during use, you can always contact us
www.nkbaler.net.