Waste plastic balers are commonly used in various waste paper factories, waste recycling companies and other units and enterprises. They are suitable for packaging and recycling waste paper, plastic straws, etc., and are good equipment for improving efficiency, increasing waste, and reducing transportation costs. But, do you know the danger of high oil temperature?

1. The oil disclosure of waste plastic baler is more severe. If the pressure of the oil pump is adjusted too high, the sealing gap will increase due to the wear of the movable parts, the sealing installation will be destroyed, and the viscosity of the oil used in the waste plastic baler will increase.

2. The system has no unloading circuit or unloading circuit behaves badly. In the waste plastic baler system, there is no need to pressurize the oil. The oil is still overflowing to the fuel tank under the working pressure set by the overflow valve or to the fuel tank downstream in an environment with a relatively high unloading pressure.

3. Poor heat dissipation. Insufficient heat dissipation area of ??the fuel tank, too little oil storage in the fuel tank, causing the oil to circulate too fast, the cooling effect of the waste plastic baler cooler is poor, such as the failure of the cooling water supply or the failure of the electric fan, the surrounding air temperature is higher than the initial temperature, etc. Bad reasons.
4. Misuse of oil with too high viscosity, waste plastic baler caused excessive hydraulic loss.

Nick brand waste plastic baler has good rigidity, toughness and volatility, beautiful appearance and stingy, convenient operation and maintenance, safe and energy-saving, and low investment in equipment foundation engineering. It can better serve you.