The gear on the hydraulic metal chip briquetting machine plays a very important role in the work of the equipment and cannot be bent. If it is found to vibrate when it is running at a slow speed when starting up, there are generally three reasons:
1. The four pillars are too tight. Treatment method: You must add some hydraulic oil to the four columns in the hydraulic metal chip briquetting machine.
2. The pressure of the support valve in the lower chamber of the master cylinder is unstable or the support force is too low. Solution: The support valve in the lower chamber of the master cylinder is unstable. The pressure of the support valve can be appropriately increased or decreased, or the spring can be replaced.

3. There is a problem with the pilot solenoid valve of the support valve in the metal chip briquetting machine equipment. Treatment method: Whether the spool of the solenoid valve is flexible, whether the matching gap is too large, and deal with the phenomenon of leakage.

Choosing Nick Machinery hydraulic baler, independent hydraulic system, servo system control, is the best choice to help you solve and recycle waste.