Gantry shears can easily cut waste materials, and the cut waste materials are easier to recycle, but there are many contraindications when using the equipment.
Gantry shears also have certain specifications, too large materials cannot be cut, and the thickness of the materials to be cut at one time cannot be too large. When cutting steel bars, a high-hardness blade is required. The gantry shearing machine is very dangerous when it is working. No matter whether it is a worker or not, the blade of the shearing machine should not be touched to avoid accidents.
After working for a period of time, the gantry shearing machine often needs to dispose of the residue near the knife edge, and tools are needed during the treatment, and the garbage cannot be cleaned directly by hand.
During work, it is forbidden to operate the
gantry shearing machine with overload. The material exceeding the shear thickness cannot be cut. If the material is too short, the material cannot be pushed into the shearing equipment by hand, and the steel plate needs to be used to push the material in.
The operation of the gantry shear is very consistent. The shearing machine must be maintained and maintained every day, and the machine tool of the
shearing machine should be cleaned in time to keep the equipment stable.
Any non-operator is not allowed to operate the shearing machine without authorization, and the operator of the gantry shearing machine needs to leave the machine and stop, and cannot operate the shearing machine without being supervised.
Gantry shears are equipment that uses hydraulic pressure as power, so they have powerful shearing capacity and are also very dangerous equipment. Once they make a mistake in operation, it is easy to cause injuries.
Here, Nick Machinery reminds you that you must follow strict operating instructions during the use of the product, which can not only protect the safety of the operator, but also reduce the loss of the equipment and extend the service life of the equipment.