Crocodile shearing machine is suitable for metal recycling companies, scrap steel plants, smelting enterprises, and cold shearing with various shapes of steel and various metal structures. It is a special tool for shearing steel plates. The performance of this tool is relatively .It is better, so the use of crocodile shears can be seen in many fields. However, the crocodile shearing machine has certain operating requirements when it is used:
1. The crocodile shears are operated by people who are not trained by others and should not be used.
2. Before driving, check whether the components are normal and whether the fasteners are firm.
3. Steel parts, cast iron parts, soft metal parts, too thin workpieces, workpieces less than 100 mm and workpieces exceeding the length of scissors are prohibited for annealing.
4. During operation, human body is not allowed to touch the transmission part and edge of the device, and attention should be paid to the safety of surrounding personnel to prevent the material from warping.Cut the material as far as possible into the knife.
5. When the crocodile shearing machine is operating, the operator shall not leave the post, the work should be completed or temporarily leave the post, the power supply should be cut off, and the machine should not be repaired or touched with the moving parts, and it is strictly forbidden to pressurize the material box with hands or feet Material.

6. All lubricating places of crocodile shears should be filled with lubricating oil at least every shift according to the requirements.

NICKBALER Machinery reminds you that in the process of using the baler, you must strictly follow the product instructions and do not ignore some small details to ensure safe and effective production. If you have any other questions, you can go to NICKBALER Machinery's website to learn https://www.nickbaler.net