WhatsApp:008615021631102      Email:sales@nkbaler.com       TEL:86-29-86031588
News Center
You Position : Home >> News Center
Remind to be aware of the troubles that may occur in the work of Nick Baler Waste paper Baling Machine
Author : admin Time : 2020-04-07 AllPageView : 232
Share:
Guide: The disassembled parts of the Nick Baler Waste paper Baling Machine equipment should be placed in a wooden frame, wooden box or tray in order. The pieces are scattered, damaged or rusted due to moisture. In order to avoid confusion during assembly. Nick Baler Waste paper Baling Machine disassembly should be prepared for the assembly of the baler. Check the mark and make the mark. Timing gears, crankshafts and flywheels, connecting rods and connecting rod caps, complete sets of processing or optional coupling parts, and other non-interchangeable parts should be marked according to the original position or sequence before disassembly to avoid confusion during assembly . To sort and store parts, store them according to the size of the parts and the assembly to avoid confusion.

   The failures that are likely to occur in the work of the automatic Nick Baler Waste paper Baling Machine are to further inspect the damage of the Nick Baler Waste paper Baling Machine parts and take out the damaged parts for repair or replacement. There are 4 sets of wire feeding device for scrap metal baler, each set corresponds to a baling head, each set includes baling line conveying device and baling line anti-tensioning device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compression frame are guided to run along the outer sides of the two tracks, and the hydraulic cylinders that drive the operation of the compression frame are arranged therein. In addition, there are a whole set of hydraulic stations besides mechanical components. As can be seen from the above description, various movements of the waste paper hydraulic baler are completed by the power of the fluid. Fully automatic Nick Baler Waste paper Baling Machine is an electromechanical integration product, mainly composed of mechanical system, control system, feeding system and power system. The whole packaging process is composed of auxiliary time such as pressing, returning, lifting, transferring, ascending, ascending, and receiving. This is the efficiency and service life of Nick Baler Waste paper Baling Machine. For our good production profit!
        Strictly abide by the correct disassembly and assembly method of Nick Baler Waste paper Baling Machine. Use disassembly and assembly tools correctly and violently knock and damage Nick Baler Waste paper Baling Machine. When using, you can use copper or hammer, or add a soft liner between the work and the vertical head. It is not allowed to replace measuring hammers with measuring tools and files, and use wrenches and chisels instead of wrenches. From the table and back, from the assembly to the parts to the parts, dismantle one by one, dismantle and inspect on the one side.
       The disassembled parts of the Nick Baler Waste paper Baling Machine equipment should be placed in a wooden frame, wooden box or piece tray in order. The pieces are scattered, damaged or rusted due to moisture. In order to avoid confusion during assembly. Nick Baler Waste paper Baling Machine disassembly should be prepared for the assembly of the baler. Check the mark and make the mark. Timing gears, crankshafts and flywheels, connecting rods and connecting rod caps, complete sets of processing or optional coupling parts, and other non-interchangeable parts should be marked according to the original position or sequence before disassembly to avoid confusion during assembly . To sort and store parts, store them according to the size of the parts and the assembly to avoid confusion.

       At present, the application of Nick Baler Waste paper Baling Machine is increasing, and the number of manufacturing companies using Nick Baler Waste paper Baling Machine is also increasing. The fully automatic Nick Baler Waste paper Baling Machine lead frame is composed of 4 sets of wire devices installed on a frame.The entire lead frame is suspended on a central axis of the compression frame, and the horizontal direction of the compression frame is under the action of the hydraulic motor. Movement, the compression frame is a welded member, and the bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of the hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams. The lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders. In the process of using Nick Baler Waste paper Baling Machine, many enterprises will encounter such and other problems. Next, the editor will analyze the difficulty of Nick Baler Waste paper Baling Machine.as fore more information ,please visit :www.nkbaler.net

   First check whether there are foreign objects in the Nick Baler Waste paper Baling Machine, and then check whether the screws are loose, which affects the normal transportation of the packaging belt. It is necessary to strictly control the gap between the strips, generally between 0.5-1.0 cm. Check whether the bearing of the conveyor baler is broken, and the incorrect position of the cross bar will also cause the problem of difficult belt retraction.
Shaanxi Nick Machinery Equipment Co. LTD 
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:East Qunsheng Road Wuxi City,Jiangsu,China
Email:nk@nkbaler.com  Nickbaler888@gmail.com
WhatsApp:008615021631102 
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top