Product Description
Printing Paper Baling Machine is a mechanical device used to compress printed paper or other materials into a specified shape and package them with strapping tape. In the printing industry, such machines are often used to process large amounts of waste paper, cardboard, newspapers, and other printing by-products for efficient recycling or transportation.
The main components of the baler include compression bin, strapping system and control system. The compression bin is a space where materials to be packaged are placed, and pressure is generated through a mechanical or hydraulic system to compress the materials. The strapping system is responsible for bundling the compressed materials with plastic straps, steel straps or other strapping materials to ensure that they will not fall apart during transportation. A control system is used to operate the entire packaging process and may include automated process control, manual control, or a combination of both.
The operation process of the baler is usually as follows: first, open the compression bin door and put the paper to be packed into the bin; then close the bin door and start the compression system to compress the paper to the preset density; then start the strapping system and use the strapping method. The belt is tied around the compressed paper blocks; finally the pressure is released, the door is opened, and the packed paper blocks are taken out.
The advantages of balers are that they improve the efficiency of material storage and transportation, reduce waste disposal costs, and help protect the environment. In addition, modern balers may also have functions such as automatic sorting and sorting, which further improves processing efficiency.
To sum up, the printing paper baler is an efficient and practical equipment. For the printing industry, it not only optimizes waste management, but also helps to improve the recycling rate of resources.
Item
|
Name
|
parameter
|
mainframe
parameter
|
Bale size
|
750mm(W)×850mm(H)×~1400mm(L)
|
|
Material type
|
Scrap Kraft paper, Carton, Cardboard ,Soft Film
|
|
Material density
|
300~400Kg/m3
|
|
Feed opening size
|
1200mm×750mm
|
|
Main motor power
|
22KW+11KW
|
|
Main cylinder
|
YG180/125-2600
|
|
Shrink Cylinder
|
YG180/125
|
|
Shrink way
|
Three side shrink month
|
|
Main cylinder force
|
60T
|
|
Max. system working force
|
21MPa
|
|
Output capacity
|
About1-3tons /Hour
|
|
Mainframe weight(T)
|
About 10 tons
|
|
Tie wire line
|
4 line φ2.75~φ3.0mm3 iron wire
|
|
Pressure time
|
≤25S/ (go and back)
|
|
Machine size
|
6.7M*3.6M*2.3M
|
Chain conveyor
|
Size
|
1200㎜(W)*12000㎜(L)
|
|
Motor power
|
5.5KW
|
|
Control way
|
Automatic / manual
|
About Us
Nick machinery specialized in hydraulic machinery,Hydraulic Baling Machine for Waste Material, baler application, waste paper Balers ,baling machine, baling press, recycling baler, Baling Presses & Balers, hydraulic baling press, baler, balers and also shredder ,crusher , Double Shaft Shredder,Tyre Crusher,Shredder,Copper Wire recyclingMachine, Heavy Crusher ect ,packaging machinery equipmentdevelopment, production, sales, service as one of the environmental protection products company, Our products are mainlyabsorbing Germany ,European and Americantechnology, products has already exported more than 60 countriesand regions at home and abroad. The company adhering to the "To change made- in-China in the international market influence" of the target as the prerequisite, to ensure that the "Products service maximization,Customer benefit maximization" asthe enterprise production policy, mainly on waste paper, waste plastics, scrap metal, fiber, agricultural straw recycling industry,it‘s for enterprise to providing convenient,fast, safe and economic solutions,now we have after-sales service center like India, Dubai, Australia, the United States and so on and well received by users.
Video
FAQ
Q1: The extrusion resistance of the baler is too large during operation, the rotation of the material tray is blocked, or the material line is tangled. What should I do?
When encountering the problem of excessive extrusion resistance, you need to stop the machine and check whether there are any obstacles on the material tray or whether the material line is tangled. After the obstacles are cleared, you can try printing again. If the problem persists, it may be that foreign matter has entered the inside of the material tube or is partially bent or worn. At this time, the foreign matter should be cleaned or the material tube should be repaired or replaced. In addition, you also need to check whether the extruder gears are stuck or damaged, and clean or replace them if necessary.
Q2: If the printer has horizontal printing problems, what might be the cause?
Printer horizontal print misses may be caused by defects in the photoreceptor drum coating or drum gear. If it is confirmed that there is a problem with the toner cartridge, it usually needs to be replaced with a new one. In addition, you should also check whether the magnetic roller sleeve, magnetic roller coating, sheath, and bias contact point are also defective, which may lead to horizontal printing leakage.
Q3: During the lithographic printing process, how to ensure the balance of oil and water to achieve good printing results?
The quality of lithographic printing depends largely on operational skills and printing knowledge. In order to ensure the balance of oil and water, attention needs to be paid to the correct use and maintenance of the ink supply device and water supply device. In addition, air temperature and humidity will also affect the oil-water balance, so control of the working environment is equally important. Reasonable control of these factors can improve print quality.
Q4: How to deal with the problem of laser printer printing garbled characters?
Garbled printing may be caused by damage to the parallel port of the printing device or a problem with the data cable. First try to replace the data cable and check whether the printer can return to normal. If the problem persists, turn off the printer, unplug the data cable, restart the computer and reconnect it. If this method does not resolve the problem, it may be necessary to contact a service center for further inspection and repair.
Related Product
Message Us